Question about 2004 Pontiac Grand Am

2 Answers

Turn signal is constantly clicking without turn signals on. Sometimes fast sometimes slow, just on it's own it starts clicking

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Pontiac Master
  • 3,854 Answers

It's more than likely to be the multifunction switch , the contacts get dirty and cause the flasher to continue to click . The flasher and hazard switch are one unit behind the dash , that's why you hear the sound from there.

The next step would be cleaning your multifunction switch. Clicking it into place wears away at it, leaving metal shavings in the grease surrounding parts. When enough metal accumulates, it likes to short and constantly complete the circuit.

Good luck and keep me posted, this was a recall and the fix was to clean the grease used, and or replace the unit.

Posted on Feb 08, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 306 Answers

The four way hazzard switch needs to be replaced it is located right above the radio.

Posted on Feb 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What part needs fixed when my turn signal blinker blinnks very fast and sometimes not at all.If I put pressure on the turn arm it will stop sometimes or clicking my high beams on or off sets it right


Flashing too fast means that at least one exterior bulb isn't working. IF its an intermittent problem, once bulb could not be making connection at times. next time its flashing fast, stop the car and look to see which bulb isn't working. Replace that bulb, clean the socket at the same time

Oct 07, 2014 | 2001 Toyota 4Runner

2 Answers

1997 Dodge Neon left signal lights work great. Right side blinks very fast.


Has the car been in a fender bender ? check for wiring going to the front and rear lights to see if on has rubbed into a ground wire or the body. ( even if there has been no accident.)

Apr 18, 2013 | 1997 Dodge Neon

2 Answers

Right rear turn signal blinker blinks very fast


Your right rear turn signal bulb is blown.Replace the bulb and the fast blinking will stop.

Nov 26, 2011 | 1999 GMC Suburban

2 Answers

Left rear turn signal light on my 1999 chev. s10 is not working


any increase in bink speed is direcly related to a bulb being burt out.

Jun 12, 2009 | 1999 Chevrolet S-10 Pickup

1 Answer

Flasher is screwed up


This sounds like a bad flasher unit. Simply by replacing this unit should fix this problem. Usually they are located on the top of the steering wheel beneath the trim. You have to disassemble the trim around the steering column.

Jun 09, 2009 | 2002 Lincoln LS

1 Answer

Turn signal relay keeps clicking on and off


Replace the hazard warning light switch. Pretty common problem on GM vehicles

Jul 20, 2017 | 1998 Chevrolet Blazer

1 Answer

Clicking noise from the blinker wont turn off!


There are 2 common things that cause this.
1. the hazzard flasher is faulty. the hazzard button and the turn signal flasher are all in one. Sometimes pushing the hazzard button in slightly will get the noise to happen, and is an indication it is faulty.
2. The turn signal switch in the steering column is bad. Turning the turn signal from left to right- very fast and harshly, will sometimes clear it up for awhile.
Tech JK
--------------

Jan 21, 2009 | 2004 Pontiac Grand Am

Not finding what you are looking for?
2004 Pontiac Grand Am Logo

421 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...