Question about 2004 GMC Canyon

1 Answer

04 Envoy xuv 4 wh. drv. stays in 4 wh drv. HI

04 GMC Envoy xuv. 4 wh. drv. stays in 4 wh drv. HI ,when knob turned to 4 wh LO while stopped in gear. Now Serv. 4 wh. Light is , on and turning selector to 2 wh. drv. flashes but gearbox does not switch from 4 wh. HI back to 2wh. drv. ,stays in 4 wh,drv.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 71 Answers

Try putting your transmission in neutral and slowly shifting the 4wd selector to each position but you have to wait a few seconds between selsctions as it has to go through your vehicles computer, shifting to fast will cause your symptoms. I hope this helped you out. Roger

Posted on Feb 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 04 gmc envoy xuv unknown driver message no security light will not start battery was bad got new one tryed passlock reset stills say unknown driver no start


It's a short in the instrument cluster.
I had the same problem with my 2004 XUV.
It started in early December of 2007.
Intermittent manifestations, than more persistent.
Took it to the GMC Dealer --
Of course, the Truck wouldn't do it's tricks for the Tech.
They replaced the ignition switch and sent me home.
It got progressively worse.
I waited until I was sure it would do it for the tech.
Took it back in to GMC Dealer--
It's a short in the instrument cluster.
They needed to replace the entire cluster.
I bought an extended warranty when I bought the truck.
The warranty is still in effect --
So I only had to pay the $100 deductible.
No Idea what it might cost otherwise.

Feb 19, 2017 | 2004 GMC Envoy

1 Answer

Tail gate on 2004 Envoy XUV


The tailgate assembly requires regular lubrication and adjustment in order to keep functioning properly. If it has stopped functioning, follow the manufacturer's recommendations for periodic lubrication and adjustment.

May 12, 2015 | 2004 GMC Envoy XUV

1 Answer

I have a 2004 GMC Envoy XUV and the 2nd gear seems to be slipping


Service the transmission immediately, oil and filter must be replaced, and magnets must be cleaned!!

Sep 23, 2011 | 2005 GMC Envoy

1 Answer

Gmc envoy 04, the gear shift slides up and down but the gear did not engage. another word, the xuv won't move


The shift cable probably has broken, usually the ring at the end breaks. Below is a diagram that shows the cable (it is item #7)

freddyboy61_16.gif

Aug 30, 2011 | 2004 GMC Envoy

1 Answer

04 GMC Envoy XUV midgate window fell won't come back up; motor runs ,window won't move


The same thing happened to my '04 XUV. Discovered broken white nylon/plastic that retains the end of the lift cable. Ordered a new lift gate motor/mechanism assembly ($250) online and replaced it myself. Be sure to buy a new limit switch ($13) also. I did not and regretted it because you must remove the old limit switch from the old motor assembly so you can re-assemble it to the new motor assembly. While removing the old switch from the old assembly, I broke it. Had to then order a new switch. The cost to ship the switch separately was more than the switch. The whole thing did not really take that long and was surprisingly easy. It works great now.

Dec 13, 2010 | 2004 GMC Envoy

2 Answers

Air flowing thru front vents


I just changed my battery as well in my 04 Envoy XUV and the air on the passenger side would not blow. The air has since returned after I restarted but the flow on the bottom has been out for some time even before the battery change.

Jul 23, 2009 | 2004 GMC Envoy

Not finding what you are looking for?
2004 GMC Canyon Logo

299 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...