Question about 1994 Chevrolet C1500

1 Answer

My Drivers side brake light will not work. I put new bulb in and still no luck. What could it be?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Chevrolet Master
  • 3,854 Answers

If the bulb is new, check the condition of the light socket and wire harness. Make sure there is no corrosion and all the wire leads have 12V. If there is not 12V, then work your way towards the wire harness and locate where the break is. It could be a simple ground wire that has corroded off from the frame, which is common to happen. Good luck and keep me posted.

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers side tail light not working


Put the passenger bulb in the drivers side and see what happens, if it works buy a new bulb.

Oct 19, 2014 | Cars & Trucks

2 Answers

ELECTRICAL PROBLEM


take it to a body shop

Nov 27, 2013 | 2000 Dodge Stratus

1 Answer

Ny brake lights work and my tail lights work .When I have the key on and the tail lights on and hit the brake pedal my passenger side lights go out ,but drivers side works


It sounds like the system is working . The problem with the pasanger side light is most likely a problem with the bulb connection or a slight ground connection to the ligh . Try cleaning the terminals to the bulb and put some dielectric grease on the contacts you might as well do them all . And also make sure the lights have a good ground connection to the body there is a ground wire for all of the lights . A bad ground or a bad bulb in the front even if the light appaers to work still has two filamants turn and running and could cause a problem in the rear lighting . Head lights will have nothing to do with this problem its the brake and siginal or running lights check it out good luck

May 16, 2011 | Nissan Maxima Cars & Trucks

2 Answers

Tail lights work on both sides. turn signal and


Sounds like you need to replace the drivers brake/tail light.

Dec 14, 2009 | 1998 GMC Sierra

1 Answer

Rear brake light will not come on. put new bulb


If the blinker and reverse lights work on the bad side maybe a new socket.

Dec 03, 2009 | 1998 Toyota Avalon

1 Answer

Brake lights on drivers side not working


IF LIGHT BULBS ARE GOOD.THE BULB SOCKET WORN OR CORRODED.OR GROUND WIRE IS BROKEN OR DISCONNECTED.

Sep 16, 2009 | 1994 Jeep Wrangler

2 Answers

On my 2000 corvette conv. the right brake light failure


sounds like ground problem, ground for brake lights r in drivers side rear about 1 foot from drivers side brake light .

Jun 04, 2009 | 1999 Chevrolet Corvette

2 Answers

Brake lights on my accord 2005 wont work with new bulbs


The brake lights are activated when you depress the brake pedal.  When depressed the brake light switch, which is located on the brake pedal level, allows the circuit to be complete.  Check for power on one side of switch then depress pedal and see if it allows power to other side of switch.  Keep me posted

Jan 06, 2009 | 2005 Honda Accord

1 Answer

Brake lights making switch at brake pedal get hot and melt at connections.


you need to check the bulbs.
This problem come whit the incorrect bulb.
Or damage socket. be sure to put a 1 contac bulb on a signal.
And 2 contact on brake light.
Check the white wire , is the ground.

Jun 20, 2008 | 1991 Toyota Corolla

Not finding what you are looking for?
1994 Chevrolet C1500 Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...