Question about 2006 Hyundai Sonata

1 Answer

Wheel stud removal, (front)

2007 hyundai sonata, wheel stud removal, (front)

Posted by on

  • silver top May 11, 2010

    hi from uk before i advise you could you please verify is the wheelsecured by bolts or a stud also are you asking how to remove because one or more have broken /snapped or just damaged threads i only ask because the accents/getz hyundais in the uk are bolts that secure wheels



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert whose answer got voted for 20 times.

  • Expert
  • 62 Answers

Usally u bang it firt with a hammer then u have to get a special tool from your aouto part store (u can rent it) and then just take them off

Posted on Feb 19, 2010

  • Rafael Chavez
    Rafael Chavez Feb 19, 2010

    oh yea some vice grips will help for removal



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i remove front wheel studs on sonata 2006

You can't remove the wheel studs totally out of the disc. It depends on how it is fitted.

Remove the wheel and check the brake disc. you can find the studs may be press fitted or welded to the brake to hold it in position & not to rotate when we tighten the bolts. Better approach nearest dealer to check it out and fix it

Jun 05, 2010 | 2006 Hyundai Sonata

2 Answers

How do you replace the fog light bulbs on a 2007 hyundai sonata

Look under the bumper and you will see two large phillips head screws right in front of the wheels. Take these two screws out and bend/move the plastice piece out of the way. Now you can easily get to the bulb. There is a cap that twists off that protects the wires and back of the bulb. Twist this off and then remove the plug portion from the back of the bulb. The bulb then turns 1/4 to 1/2 revolution to loosen and remove. Reverse steps for installation.

Dec 19, 2009 | 2007 Hyundai Sonata Limited Sedan

1 Answer

Front wheel stud replacement for a 2006 Hyundai Sonata GL.

grind a flat spot on the round head of the new stud this should give enough clearance to install it. don't pull the hub this will damage the bearing.

Oct 24, 2009 | 2006 Hyundai Sonata

1 Answer

How to replace front wheel bearing 2009 Sonata

No way ,its a strip the the whole hub unit off and there is a circlip coming in from the back ,which is the way the bearing is pushed out ,NO HAMMERS

Oct 23, 2009 | 2006 Hyundai Sonata

1 Answer

How can I replace the front wheel studs on a Hyundai sonata 2003?

hi if you look at the new stids you are going to fit? you will see they are splined on the inner side so with wheel off you tap the old stud/s backwards from the hub then fit new stud/s from the rear ensuring located on splines then you can draw fully home into hub using w/nut or another nut same thread ? if your cars nuts are not open ended ?

Oct 03, 2009 | 2007 Hyundai Sonata Limited Sedan

2 Answers

Need to replace wheel stud on hyundai sonata, how?

have a 2005 hyudai tucson can't remove the front studs even though we pulled off the brakes and caliper but still not enough room to put in new studs and i can't dissasemble it any further

Aug 15, 2009 | 2002 Hyundai XG350

1 Answer

I need to remove front r/side studs on 2005 hyundai elentra 4 dsd?

dear friend-replacing the stud is a fairly intensive job,the hub must be removed,so you might have to replace the wheel bearing,you will need special tools to attemp this job.

Jul 12, 2009 | 2007 Hyundai Sonata Limited Sedan

1 Answer


To remove that hub you will destroy the bearing. Because you have to remove it with a slide hammer. It is not necessary to remove the hub to change the studs. Remove the caliper, caliper bridge and rotor. Using a hammer simply knock out the stud or studs you want to replace. Put new stud in and using a sleeve that has a bigger diameter than the stud (I use a big nut, like the one on the axle) put big nut over stud and screw lug nut on stud and tighten until head of stud is flush with hub. Re-install rotor, caliper bridge and caliper. Hope this helps.

May 19, 2009 | 2007 Hyundai Sonata Limited Sedan

1 Answer


you may need a puller to remove it if there are no bolts parent on the back side of the hub, there might be a a bigger nut on the backside, may have to remove steering components

May 19, 2009 | 2007 Hyundai Sonata Limited Sedan

1 Answer

Replacing rear wheel bearings on 1999 hyundai sonata

  1. for drum brakes with sealed hub(all one piece) remove lug nuts and wheel.
  2. spray penetrating oil around studs if there is a big phillips head screw visible remove it with impact driver/if not use big ballpeen hammer ,tap on flat of drum near studs(becareful not to hit them) until drum loosens(your creating a shockwave to loosen rust)
  3. once drum is off there are 4-bolts coming in from behind backing plate, remove them then hub should be able to be removed w/a little persuation from hammer.
with out sealed hub ,
  1. remove wheel
  2. remove dust cap,cotterpin,star washer(if equipped) do not re use cotter pin
  3. remove nut then washer, wiggle brake drum and front bearing will come out.
  4. put nut on shaft tighten 2-3 turns grab drum by sides and pull towards you this should remove drum leaving inner bearing/seal on shaft
  5. to replace reverse procedure making sure to pack new bearings w/grease(take drum and use long punch to remove bearing races, use race/seal installer to install new races
with disk brakes

  1. remove wheel
  2. remove caliper/bracket
  3. remove rotor
  4. remove 4-bolts from behind,tap old hub out
  5. reverse procedure

Jul 19, 2008 | 1999 Hyundai Sonata

Not finding what you are looking for?
2006 Hyundai Sonata Logo

598 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides