Question about 2003 Saturn ION

2 Answers

Grinding sound front end not the brakes when car is moving

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 306 Answers

Could be a bad wheel bearing.

Posted on Feb 08, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 677 Answers

If you know for sure it is not the brakes, then the other 2 options are the bearing in your drive shaft hub, or the drive shaft CV joint assem.
Really the only way to tell is put it up on safety jack stands with the park brake on, and rear wheel chalked, remove the front wheels and have someone listen while you put the car in drive. Let the drive turn slowly at idle and see what you find.
Please let me know what you find

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front end grinding noise


Sounds like either brakes are metal to metal or a bad wheel bearing

Aug 04, 2014 | 2004 Chevrolet Cavalier

1 Answer

Front end noise


Assuming that you have already ruled out the brakes, severely worn engine mounts can transmit vibration and noises from the engine which are not normally heard. You don't say in what I see but is the vehicle two or four wheel drive. Since you mention CV half shafts I have to assume it is at least front wheel drive. If the vehicle is four wheel drive then there is a front differential with bearings in it that may be at fault. Have you done both sides when you say "hub assembly". Defective hub bearings will make grinding noises which will change tone or intensity when turning, accelerating or braking however the noise is usually fairly constant unless they are only just starting to fail. CV joints don't normally "grind" unless they are really bad. They usually make progressively worse "clicking" sounds or "clunking" sounds especially when turning hard, changing gears or direction of travel (forward to reverse and back again). Do you have non-stock tires/wheels? Larger/wider than factory spec tire sizes can rub the fender wells when the car is moving or turning. Another thing it could possibly be is the air dam below the front bumper. If it is loose it will push down in the airstream while the car is moving and rub on the ground.

May 12, 2013 | Cars & Trucks

1 Answer

Sound like tire scrubbing and grinding on right front 2004 ford explorer


Get your brakes inspected - the grinding noise may be the front disc brake pads, which have worn out. Several national chains offer free estimates for brake repairs. They will also check the other front end components, which could be causing the noise.
Hope this helps...

Jan 07, 2012 | 2004 Ford Explorer

1 Answer

Front end grind


Sounds like a wheel bearing.

Feb 20, 2010 | 1995 Toyota 4Runner

1 Answer

Front end noise when turning. almost sounds like


There are a couple of things to cause metallic sounds when turning. First thing, is if it's a clicking sound when you turn, then you have a cv joint going bad. It's usually more prominent when moving in reverse, however it can happen just as well while moving forewards. Secondly, if it's more of a grinding or scraping noise, we have a couple of options. The sound could be coming from the brakes, if they're worn or have grit stuck in them, or it could be bad bearings in the front wheel hub. The wheel hub has a tendency to making a whining noise when driving; usually most easily heard when driving past buildings. They can also allow the tire/wheel to present the appearance of leaning when looking at it. If bad enough, it can even rub on the brake caliper, or cause the disc brake rotor to wear out the brake pads prematurely. So, to recap: Check:
CV joints, if a clicking sound brakes or wheel hub bearings if grinding or whining sound.

Oct 19, 2009 | 2000 Jeep Cherokee

1 Answer

95 ford explorer, grinding noise/vibration at slow speeds.


CHECK YOUR UNIVERSAILS COULD BE WORN OR DRY U NEED TO PULL OUT THE SHAFT TO CHECK PROPLEY CHECK FOR STIFFNESS AND NOTCHEY MOVEMENT

Dec 16, 2008 | 1998 Ford Explorer

2 Answers

Front end grinding sound


My '99 Intrepid at 132k mi had a sound like a pan of rocks rolling around in the front end. The engine fan and the A/C fan were shot. Replacement of fans and a couple of belts (serpentine and another) cost about $800 at the dealer in May 2006. Still going strong at 152k, but should replace the steering gear box.

May 14, 2008 | 1983 Dodge 400

Not finding what you are looking for?
2003 Saturn ION Logo

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...