Question about Pontiac Bonneville

2 Answers

On a 1994 Pontiac Bonnevile, 3.8L, I need the the torgue specs and patterns for the Heads. Can anyone help me out

Posted by on

  • 1 more comment 
  • ismael120her Feb 08, 2010

    is this for both heads?

  • ismael120her Feb 08, 2010

    On a 94' Pontiac Bonneville 3.8L I need to know the torque and torque pattern for the heads. Can anyone help me out?

  • ismael120her Feb 08, 2010

    yea thanks



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 3 tips or uploaded 2 video tips.


    An expert whose answer got voted for 20 times.

  • Expert
  • 146 Answers

Here is the info, let me know if you have questions. Thanks

Posted on Feb 08, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,068 Answers

Torque spec is 35 ft. lbs. and patteren is...

sorry for the crude drawing but it's very early and this is what you need. so good luck and thank you for using

Posted on Feb 08, 2010

  • 1 more comment 
  • michael schultz
    michael schultz Feb 08, 2010

    1. here...

  • michael schultz
    michael schultz Feb 08, 2010

    yes it is.

  • michael schultz
    michael schultz Feb 08, 2010

    hi , can i ask what was not helpful with my awnser? these are the specs and the pattern you asked for... two thumbs takes my rating down and i strive for 4 thumbs. just wondering if you can let me know so in the future i can do something differently. thank you for using



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to torgue 3.5cylinder heads

I looked at an Altima 3.5L
I don't know if your going to use nm or ft lbs? no need for both. I did post torque specs.



Dec 02, 2016 | Cars & Trucks

1 Answer

I need to know torque specs and torque pattern for a 2001 head gasket on my 2001 sunfire

HINT: The "torque pattern" on ALL cylinder heads is start in the center and work your way toward the ends. The specifications below are "torque-to yield" or "torque angle" specs. When in doubt, about 65 Ft. Lbs. will work on pretty much ANY aluminum head. The main point is to get them EVEN to prevent warpage.


Nov 20, 2011 | 2001 Pontiac Sunfire

1 Answer

Need torgue specs & sequence for upper & lower

Lower: Torque to 28 N·m (250 in. lbs.)

Upper: Torque to 12 N·m (105 in. lbs.)

Sequences below:



Good luck.

Jul 23, 2011 | 2004 Dodge Intrepid

1 Answer

Do i use gasket sealent on an oil pan gasket for a delta LS 88 1997?

in a word yes.... if you are using the paste type paint the top and bottom of the gasket an torgue it it to specs. use a correct pattern as you tighten the bolts the same as you would for a tire. if you use the type from a tube just put an even bead around the gasket area of the pan then a bead on the gasket top and follow the specs for torgue again

Feb 28, 2011 | Oldsmobile Delta 88 Cars & Trucks

1 Answer

I need a picture of a serpentine belt routing for a 1994 pontiac bonnevile 3.8 L ac bypass

I can't directly post the routing diagram but i can direct you to a catalog of diagrams, just look up your engine and your make and model and go to the bottom of the pdf file for the numbered diagram for your car. Please allow the large pdf file to load from the link below. Thanks$FILE/SerpentineBeltRoutingGuide.pdf

Dec 28, 2010 | 1994 Pontiac Bonneville

4 Answers

Need the head bolt torque specs for a 1999 grand am - i am trying to replace the heads on 1999 grand am with 3.4 engine

Fig. Cylinder head bolt tightening sequence-3.1L engines & 2001-04 3.4L engines


Fig. Cylinder head bolt tightening sequence-2005 3.4L engines


Hope this help (remember rated and comment this).

Mar 30, 2010 | 1999 Pontiac Grand Am GT

1 Answer

A repair shop told me that my EBCM was bad and needs replacing. The Brake, Tracktion control idiot lights are on. I have a 2001 Pontiac Bonnevile SLE. The dealer wants $700+ just for the EBCM module. Does...

Look on This is a network of salvage yards from all around the country. Most will ship to you at reasonable cost. Once, a dealer quoted me $700 plus for an TCM, and I got it through this website for $75 from a salvage yard in California. Good luck.

Mar 28, 2010 | 2001 Pontiac Bonneville

1 Answer

1994 bonnevile and it slipping and vibrating

If I'm reading that right? Sounds like the final drive has given up, and split the case for the trans. The sensor that you are seeing hanging down would be the vehical speed sensor.
If that is the case then It sounds like a new/used transmission is needed. Because if the final drive blew up that would send metal throughout the transmission and even if you got it fixed the way it is now it would only last a couple of miles untill something else went bad.
Good Luck, report back if further assistance is needed.

Oct 23, 2009 | 1994 Pontiac Bonneville

1 Answer

Spark plug wiring pattern for 94 sunbird


Depends on what engine is there inside.
1. for the 2.0 4 cylinders, 1-3-4-2;
2. for the 3.4 V6, 1-2-3-4-5-6

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

May 31, 2008 | 1994 Pontiac Firebird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides