Question about Hyundai Tucson

Open Question

I wish to fit a towbar to my hyundai tocson,could you please tell me where to pick up the rear lighting wiring loom ?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 85 Answers

SOURCE: wiring in a tow bar

First I'm sure that a Festiva should probably only be towing body weight, But if you want to hook up a wiring loom for towing I would suggest buying a 4 lug loom from a auto store, then I would get a chilton or haynes manual to get the wiring diagram (or internet) then wire it up with **** connectors and electrical tape.

Posted on Apr 29, 2009

junmag
  • 175 Answers

SOURCE: Tow bar trailer socket wiring connection point to car wiring?

no standard color codes. all you need is park light, signal left and right, brake light. easiest way is to connect the wires in the tail lights. hope this helps

Posted on Jun 03, 2009

alicantecoli
  • 22095 Answers

SOURCE: fitting towbar to nissan primera p10,need to know

you are not allowed to fit your own towbar anywhere in europe now ,it can only be done by an authorised agent with the necessary rubber stamps

Posted on Jun 14, 2009

  • 33 Answers

SOURCE: wiring diagram

All wires that you need are behind the carpet in the boot on the left hand side, there is a blue connector there, best to use a test lamp to locate which wire does what.

Posted on Jul 21, 2009

  • 582 Answers

SOURCE: ford focus c max towbar electrics

ARE YOU READY
L.H. STOP AND TURN ( YELLOW )
R.H. STOP AND TURN ( GREEN )
TAIL, LICENSE, SIDE MARKERS ( BROWN )
GROUND ( WHITE )
NOW THE COLORS ON THE VEHICAL ARE GOING TO BE DIFFERENT AND YOU WILL NEED A 12 VOLT TEST LIGHT FOR MAKEING SURE YOU HAVE THE WRITE WIRES FROM THE CAR TO THE TOE BAR, DON'T NEED BACK UP TIGHTS FOR THIS

Posted on Aug 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a wiring diagram to fit a towbar wiring / trailer lights to my 2013 Hyundai ix35


if you have the proper kit , the it is a simple matter of pulling the harness connector from a tail light assemble and inserting the harness on to the assembly the fitting the harness back on to it
the wires are color coded and all new trailer plug connections have the pin numbers for the color wire to get the correct lights working at the back
if you are not power or circuit savvy then get the towbar shop to wire it up or get an auto electrician to do the job

Jun 28, 2016 | Hyundai Cars & Trucks

1 Answer

Can I just wire my Towbar electrics in to my wiring loom or do I need somthink else on my 04vectra


Yes you can tap into the wiring loom for trailer lights, that is how rental agencies do it on their trailers.

Apr 01, 2016 | Cars & Trucks

1 Answer

I have a 2012 Hyundai ix35& have fitted a towbar wiring loom.


take it to an accredited auto electrician to have the reverse sensor disconnected when the trailer is connected as the sensors are seeing the trailer when reversing and that is why they are beeping

Feb 17, 2016 | Hyundai Cars & Trucks

1 Answer

Where to find fuse for relation of the reverse parking sensors in kia sedona ls 07plate


kia sportage parking sensor - ABMforum.com

abmforum.com/kia-sportage-parking-sensor.html
kia sportage parking sensor installing rear parking sensors fitting rear parking sensor strip ... the pre-drill hole on 07 sportage 2007 kia sportage lx navigation wiringparking sensors. ... I cannot see any fuse which may relate to them. ... with their rear parking sensors Even if all is clear behind I now get a continuous beep and ...

Urgent help needed - towbar electrics - Kia Forum

www.kia-forums.com/kia.../71610-urgent-help-needed-towbar-electrics....

Aug 28, 2011 - 10 posts - ‎3 authors
I'm in the middle of fitting a genuine Kia towbar (made by Witter) to my SW. ... Need help again - Does anyone know the location of the PDC Control unit (parking sensors)? ... Drives: Kia Ceed SW 1.6 MT LX A8 ... with the loom which connects to the fuse box does not seem to attach to the rear lighting loom.

[PDF]2007 Sedona Owner's Manual - Kia Canada


Jan 30, 2016 | Kia Cars & Trucks

1 Answer

How do i fit a towbar to a 1995 hyundai excel


if you get a hyundai bar the instructions will be with it as will most other makes , if you go non hyundai make sure it is the exact bar for your vehicle , a workshop manual will give you the wiring connection required for the brake lights etc keep me posted if you wish

Jul 15, 2014 | 1994 Hyundai Excel

1 Answer

I need the wiring colour coding for the rear lights of a 2000 v40d as im fitting towbar electrics


Your post:
Hi There.
here are the 7 cable locations and pin numbers.
Pin 1 Yellow L/H Direction Indicator
Pin 2 Blue Rear Fog Lamps
Pin 3 White Earth Return
Pin 4 Green R/H Direction Indicator
Pin 5 Brown R/H Tail & No, Plate Light
Pin 6 Red Stop Lamps
Pin 7 Black L/H Tail & No, Plate Lights

I found the easiest way to locate the correct wires in the loom is to turn on the lights required and use a circuit tester and splice into the main loom where you have enough wire to play with. Try not to cut the loom as it only causes more problems with bad connections and joins.
Good Luck

Apr 07, 2011 | 2000 Volvo V40

1 Answer

Fitting single towbar electrics, Hyundai Coupe 2.0 2004 (Tiburon)


Hi There. Im not sure where you are but this is the sequence for the UK< Hope it helps.
here are the 7 cable locations and pin numbers.
Pin 1 Yellow L/H Direction Indicator
Pin 2 Blue Rear Fog Lamps
Pin 3 White Earth Return
Pin 4 Green R/H Direction Indicator
Pin 5 Brown R/H Tail & No, Plate Light
Pin 6 Red Stop Lamps
Pin 7 Black L/H Tail & No, Plate Lights

I found the easiest way to locate the correct wires in the loom is to turn on the lights required and use a circuit tester and splice into the main loom where you have enough wire to play with. Try not to cut the loom as it only causes more problems with bad connections and joins.(
Good Luck

Apr 16, 2010 | 2003 Hyundai Tiburon

1 Answer

Wiring towbar electrics for nissan navara d40


The best, and in fact the only recommended solution is to use a plug-in dedicated wiring kit for this car, it plugs into a grey connector on the chassis on the rear of the left hand side. this is the connector that the cars rear light loom is plugged into and the towbar loom piggybacks onto this using the same watertight sealed connectors. There is a trailer indicator warning light already built into the dash display so no need for any other monitoring of the trailer functions. This wiring kit should cost you around £40-£50 and will only take around 10mins to fit. The other alternative is to solder the towbar wires to the cars loom, but this is time consuming and may invalidate the vehicles warranty.

Sep 15, 2009 | Nissan Pathfinder Cars & Trucks

1 Answer

Cant find the towbar electrics plugs for x-type


I assume that the towbar didn't come with a proper wiring kit as, unfortunately there is not a specific connector for the towbar wiring on the x-type, the proper Vehicle Specific Kit plugs into the rear light. There is a power connector with three pins on the left and a grey reverse sensor cut out connector also on the left. but you will either need to use a Vehicle Specific Wiring kit (about £175) or use a bypass relay system.

Aug 30, 2009 | 2006 Jaguar X-Type

2 Answers

Tow bar trailer socket wiring connection point to car wiring?


The connectors for towing wire harnesses on foresters are generally on the passenger side, below the rear taillight inside the cargo space. some require pulling up the foam block that is between the spare tire compartment and the taillight. Check where you replace the tailights from inside the car, if there isn't a matching connector hanging out there, check around the spare tire compartment, see if you can remove the carpeted foam block next to the compartment and find the plug under there.

Jun 03, 2009 | 2006 Subaru Forester

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...