Question about 2004 Dodge Stratus

1 Answer

I need to locate the cam sensor for dodge stratus 3.0 2004 model

Posted by on

  • donnamcmaste Feb 08, 2010

    I have been having problems with my car and had it read at the parts store and the code was for a sensor to be replaced. The problem is, I can't locate the sensor on my car. Can you help me ?

×

1 Answer

Please tell us your NOT replacing a cam sensor because someone told you to get a code read at some auto parts store. This is like the flu spreading on this site. Codes DO NOT always mean a sensor is bad. Test it before you throw parts at it.

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the cam position sensor on my dodge stratus 2004


Its located on top right side of oil I utubed it I only needed one small socket took ten minutes to change don't forget to disconnect battery first

Oct 01, 2013 | 2004 Dodge Stratus

1 Answer

Where is the cam sensor relay located on a 2004 Dodge Stratus?


If you mean the camshaft position sensor it is on the right hand side of the engine up near the valve cover on the 2.4L 4cylinder engine.

Jan 23, 2011 | 2004 Dodge Stratus

2 Answers

Cam sensor needs to be replaced


Try and Google but depending on engine the 4 cyl. sensor is on the front where the engine and trany bolt together.Hope this helps.

Feb 23, 2010 | 2004 Dodge Stratus

4 Answers

Where is the camshaft position sensor located on a 2004 dodge stratus 4 cyl 2.4L engine


the camshaft sensor is mounted on the camshaft housing located on the end of the cylinder head.

Jul 08, 2009 | 2004 Dodge Stratus

1 Answer

2003 stratus both sensors replaced still unresolved


Have the exact problem. Replaced cam sensor and timing belt. Still happens intermittently. code is p0344.

May 30, 2009 | 2003 Dodge Stratus

1 Answer

I HAVE A 2000 DODGE STRATUS 2.5 V6. WHERE IS THE CAMSHAFT SENSOR AND CRANKSHAFT SENSOR LOCATED


Cam is on the end of the block, crankshaft sensor is on the bottom of the block. Both are easy to change....are you changing these due to poor performance or no start condition?

Mar 21, 2009 | 2000 Dodge Stratus

1 Answer

2004 dodge stratus with 2.4L


Hi...
The Code P0340 on your Stratus is :
Camshaft Position Sensor Loss signal.
Ok, The first step is check tha condittion on the connector.
For corrosion, bent pins or damaged wires.
If you found that everything is ok.
Replace the Cam Position Sensor.
The Cam Position Sensor, Is common that the Cam fail on this Vehicle and similars of this.
Tha Cam position sensor Is located:
At end of the engine head, driver side. Is attached with 4, 10mm
screw, and the connector at the center of the sensor.

I hope this help on your problem.
Thank you for use fixya...

Aug 29, 2008 | 2004 Dodge Stratus

Not finding what you are looking for?
2004 Dodge Stratus Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...