Question about 2004 Ford F250

1 Answer

Got a third brake light but others dont work - 2004 Ford F250

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 25 Answers

Third brake light is on a differnt wrie then the turn signals on the truck. This is so it doesn't blink like your turn/brake lights do. Your fuse panel in the truck houses the fuses for the brake and turns on the truck .The fuse panel in the engine compartment houses the fuses for the trailer brake and turn. Check your fuses in the panel below your steering column for blown fuses and also check your rear bulbs as i have seen both burnt out at the same time. otherwise check your wiring harness right behind the last crossmember on the left side up by the spare tire. Sometimes they get corroded there at the connections.

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 mustange gt brake light dont work check #9 fuses change all bulbs replaced switch on brake pedal hazards lights works ,parking or running lights works,turning signal lights works,what other places i...


I assume the fuse has power if the hazards work.
The third brake light skips the turn signal switch, the regular brake light circuit goes thru the turn signal switch.
Do you have power going into the turn signal switch on the red lite green wire from the brake switch ?

Feb 17, 2013 | 1995 Ford Mustang

1 Answer

2001 ford escort zx2 third light works but nothing else power to brake switch tried to jump it an they still dont work


Did you try new bulbs? Check for loose wires on the plugs going to lights, Or a break in the wires, Bulb sockets for condensation, if none of that is the (problem) take it into a auto electric Shop to be check out,

Nov 27, 2012 | 2001 Ford Escort ZX2

1 Answer

I have a 1995 GMC Sierra an the third eye brake light comes on but the other brake light dont work


Could be both bulbs have burned out at once. Or could be the brake light switch. The third brake light and the normal brake lights operate seperatly. Or could be the wires.

Sep 01, 2011 | 1989 GMC Sierra

1 Answer

The third brake light works others dont. Have power to and from brake light switch. Any thoughts?


Other brake lights go thru turn signal switch. See if it is unplugged at bottom of steering column.

May 08, 2011 | 1999 Chevrolet Lumina

1 Answer

Cruise dont work and 3 brake light dont work


Hello carrollrll,

Fix the third brake light and that should resolve the cruise control issue.

The cruise control circuit that deactivates the cruise is through the third brake light.

Regards,
netvan

Mar 29, 2011 | 2002 Ford SVT Focus

1 Answer

Brakes Lights dont work on a 2006 Chevy Silverado


I've worked on these the first drove me crazy. its the turn signal switch every thing runs thru these. head lights, turn signal, brakes. except the third brake light. it runs directly from the brake switch. go figuare

Jun 22, 2010 | 2003 Chevrolet Tahoe

1 Answer

Brake lights dont work,fuse good ,bulbs good,third light works


The third brake light switch works off a module for it is a sealed unit with a inverter that takes 12 volts beefing the voltage to 110 volts for the light emitting diode lights in it. It these terms you will need a new brake light switch located by the brake pedal

Apr 20, 2010 | 1997 GMC Jimmy

1 Answer

MY BRAKE LIGHTS DONT WORK, THIRD BRAKE LIGHT WORKS, FUSE IS GOOD BULBS ARE GOOD AND NEW BRSKE SWITCH, TAIL LIGHTS WORK???


you have a broken wire some were if you cant find it you can run a seperate power wire from the third brake light to the brake lights but i would check for power at the brake lights first to make sure its not a ground problem

Jan 11, 2010 | 2005 Chevrolet Silverado 2500HD 2WD

1 Answer

Lower brake lights dont work,third light does


Turn signal switch 95% of t he time. Try to work your hazards, if it stuck at all will also cause this.

Feb 10, 2009 | 1998 Chevrolet Blazer

Not finding what you are looking for?
2004 Ford F250 Logo

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...