Question about 2001 Chevrolet Blazer

1 Answer

Wont shift out of 4lo to any other 4hi or 2hi what can i do

Posted by on

  • Jason J May 11, 2010

    do you have it in neutral when trying to shift?.... i guess for a correct diagnosis i need more info

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 71 Answers

Shot in the dark but I have done this before! Back up at least 50 yards in reverse with the selector set to 4wd Lo come to a stop, put your transmission in neutral, shift the 4wd selector to 4wd hi wait for a few seconds, shift it to 2wd hi wait a few seconds then put your tranny back into drive and see if that takes it out of 4wd. Good luck

Posted on Feb 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 chevy suburban stuck in 4 lo anyone out that cant help


Put truck in Neutral while key in run position engine off or on (doesn't matter which). If it's pushbutton 4wd then try hitting 4low again. if that doesn't work some of the chevy trucks required you to press 4hi to get into 4high and then press 4hi again to get back to 2hi, unless yours has a 2hi button. In that case press 4hi to get into 4high and then press 2hi to get back to 2wd. either way you need to be in neutral to get out of 4lo. I have shift on the fly (Mechanical Shifter on floorboard for transfer case) on my 1990 Suburban and still have to put it in neutral to get out of 4lo. Good Luck.

Jan 30, 2014 | 2000 Chevrolet Blazer

1 Answer

Shifting 4x4 4lo


Most likely cause is the encoder motor on the transfer case.

Oct 26, 2013 | 2002 Chevrolet Silverado 1500

1 Answer

How to properly engage and dis-engage 4 wheel drive 0n 1996 gmc sierra


  • Shifting from 2HI to 4HI Press and release the 4HI button. This can be done at any speed, and the front axle will lock automatically.

  • Shifting from 4HI to 2HI Press and release the 2HI button. This can be done at any speed, and the front axle will unlock automatically.

  • To shift from 2HI or 4HI to 4LO, the vehicle must be stopped or moving less than 3 mph with the transmission in NEUTRAL

  • Hope this helps.

Oct 29, 2011 | 1996 GMC Sierra

1 Answer

Electronic tranfer case switches are not working, what could be the problem? The vehicle is in 2 wheel hi now and when I push the 4 hi button nothing happens...when I start the vehicle, all three switches...


check the trasfercase shift control module and wiring
it's located on the passenger side
remove the carpet thresh hold
remove the kick pannel they are held on by clips
the module is behind the kick pannel
disconnect the module harness and see if it is corroded if so you need to replace the connector and the module
let me know if thats not it but i have done lots

Dec 23, 2009 | 1997 Chevrolet S-10 Pickup

1 Answer

02 dakota wont shift from 4hi to 2 hi


Try commanding the drive ranges while in netural cycling them. This may normalize the controller that senses the position from the encoder motor assembly. There maybe a procedure for that in a service manual.

Dec 12, 2009 | 2002 Dodge Dakota Club Cab

3 Answers

HOW DO I PUT A 1998 GMC JIMMY IN 4 WHEEL DRIVE?, DO I HAVE BE IN "PARK" OR CAN I CHANGE IT INTO 4 WHEEL DRIVE WHILE IM DRIVING?


You should be able to put in 4x4 while in drive less than 35mph. Mine had a switch to turn to engage or dis-engage.

Oct 15, 2009 | 1998 GMC Jimmy

1 Answer

96 chevy 4x4. no ind lights. stuck in 4hi


Replace the selector switch assembly. Common failures.

Mar 27, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

On my 2000 chevy S10 blazer, when I push the 4HI button, the 4HI and 4LO buttons flash a yellow light and it won't shift to 4WD, stays in 2HI and the light in the 2HI button is on yellow......I hear...


vacuum leak or vacuum locker solenoid problem. a great way to check for both is to remove both vacuum lines from the solenoid (located on firewall above destributor), and put a connector between them, push the button on the dash and see if it locks in.

Jan 18, 2009 | 1999 GMC Jimmy

4 Answers

2001 s10 pickup transfer case wont go out of 4lo


something has broke inside the transfer case keeping it from going into any other gear

Jan 03, 2009 | 1999 Chevrolet S-10 Pickup

2 Answers

S10 pickup 4wheel drive wont shift from 4hi to 2hi


A good ground is very imporant on these vehicles

Dec 31, 2008 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...