Question about 2002 Ford F150 Regular Cab

2 Answers

MY HAZARD LIGHTS WORK BUT MY BLINKERS DONT - 2002 Ford F150 Regular Cab

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 488 Answers

Hazard lights are on a different circuit as they are supplied with power from the battery. Indicators are supplied through your ignition switch. Take a look at fuses first, check them electrically using a test probe. Then take a look at the flasher unit. It may be difficult to find but check in the fuse panel first. This usually looks like a square relay type but it will have two or three connections, not four or more. Flasher units dont fail that often but they do fail.Try turning the ignition on and then switch one side flashers on, then tap each relay box in the fuse panel. If it clicks, then that signifys that it is the flasher unit, replace it with the same type. WARNING, if you use the wrong type of flasher unit, you will damage the new unit and pop fuses etc. Make sure you replace it with the same type of flasher unit.

Posted on Feb 08, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 332 Answers

Try checking the fuse for the blinkers, if it's intact then you'll need changing the blinker switch arms on the steering wheel. Good Luck

Posted on Feb 08, 2010

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

maklean
  • 1665 Answers

SOURCE: turn signals /hazard lights don't blink

Hi! check first for any blown fuse. INSPECTION 1. Check for a burnt fusible link with an ohmmeter. 2. If a fusible link burns out, there is a short or some other problem in the circuit. Carefully determine the cause and correct it before replacing the fusible link. The fusible link will burn out within 15 seconds if a higher than specified current flows through the circuit.2f5ff5a.gif

Posted on Jun 03, 2008

johnny5846
  • 379 Answers

SOURCE: 2001 dodge neon tail lights inop

looking at your schematics and , you say tail lights don't work , you didn't mention if front parking lights and license plate lights are working , they all come from the same source , a black /yellow wire , a good clue if front work and rear don't , please advise .if fronts work then you have a open circuit somewhere between junction S118 (near breakout for left headlamp) and rear sockets.

Posted on Dec 31, 2008

awcforever
  • 359 Answers

SOURCE: All my blinkers and brake lights stopped working

PO430: Catalyst System Efficiency Below Threshold (Bank 2)

Here is a site that you should go to and further look at the common problems with your catylitic converter, and also your other emissions systems. Hope it helps, and please rate!!!

http://www.discountconverter.com/catalytic_converters_news/news_page.cfm?Key=codes-po420-po421-po430-po431&News=120

Posted on Mar 15, 2009

localwonder
  • 6784 Answers

SOURCE: blinkers and hazards not working on Jeep GC

HI. the flasher is faulty or damaged. replacing this device will fix your issue.

Posted on May 27, 2009

MNfisherman
  • 11896 Answers

SOURCE: My blinkers wont work but the hazards work. No fuses burnt out.

That would most likely be the switch itself. Fairly common

Posted on Aug 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 4 Runner blinker problem


The hazards use a separate relay. listen for signal relay clicking to locate the correct relay. Consult your owners manual for fuse and relay layout.

May 26, 2017 | Toyota 4Runner Cars & Trucks

1 Answer

Turn signal hazard lights work but not running lights


The parking lights should be on a different circuit from turn signals - hazard lights. The bulbs usually have two filaments, one for each circuit.
On most models there is a tail light fuse and relay that handles front and rear parking lights.

Jun 28, 2013 | Toyota Tacoma Cars & Trucks

1 Answer

Hazards dont work but blinkers do


Blinkers and hazards normally work on the same fuse. Sounds like the hazard switch has a problem.Get the hazard switch out and bridge the two connector wires to the switch. If the hazards then work the problem is in the switch.If it don't work you may have a problem in the wiring between the switch and the flasher relay.

May 05, 2013 | 2003 Ford F150 Regular Cab

1 Answer

The blinkers dont work


Assuming that you've checked the regular fuses, have you checked the relay for the blinkers? If not, one way to do so is the switch the relay for the hazard lights with the relay for the blinkers and see if that solves the problem. If it does, replace the relay so you have both blinkers and hazard lights.

Feb 26, 2012 | 1999 Cadillac DeVille

1 Answer

Blinkers


Turn signal lights and hazard lights it is the same flasher; the Flasher is located front seating area, driver side, behind dash, mounted on steering column. Do you have power on the white/red wire at the switch?

I would start with testing the multitunction switch that is more than likely faulty.

Hope this helps.

Feb 26, 2012 | 1998 Ford Explorer

1 Answer

1990 Corsica: the brake lights work but the blinkers dont...


does the hazard signals work? if they do, then replace all turn signal bulbs.

May 06, 2010 | 1990 Chevrolet Corsica

2 Answers

My left break and blinker light don't turn on. I have a 2003 dodge neon. can this be a fuse and if it is which one is it?


If the left front light works,then you don't need a fuse you need a bulb for the left rear light.

Oct 22, 2009 | Dodge Neon Cars & Trucks

1 Answer

Blinker dont work flasher and other lights work


The turn signals don't work, but the emergency flashers do? If that's the case, replace the flasher, you have 2 flashers, one for emergency (hazard) flasher, and one for the turn signals. It should be on the fuse block under the dash.

Oct 23, 2008 | 1995 Jeep Cherokee

Not finding what you are looking for?
2002 Ford F150 Regular Cab Logo

628 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...