Question about 1994 Honda Civic

1 Answer

There is no wirng for me to hook up the actual horn under the front bumper . the horn to the steering is connected cause i can hear it clicking,but the horn under the hood has no wires running to it. nor is there any visible wire to connect it to. its as if there was none

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 430 Answers

There is only one wire going to the horn & it generally has a connector (12 volt) on the end that slides/clips/connects to or over the terminal you see on the horn.

If you can't see it, you will want to just look up under the frame channel by the radiator, then check the nearest wiring harness locations for the wire you need. When you find a single wire with a terminal that appears that it will plug into the horn, put your test light into the terninal & ground the other end, watch as you press the horn button & you will confirm that this is the wire for that. Also, look for a cut wire where someone may have altered the harness due to a previously stuck horn.

If you can't find one at all, you can wire it yourself from the relay but you should be able to eventually trace the wire by checking all available harness that are nearby & up under the brace.

Good Luck

Posted on Feb 08, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 1998 C2500 Chevy truck I replaced the horn fuse and all I get is a clicking sound from the horn relay. Should I replace it also? What else could be wrong?

There are some connectors behind your steering wheel that may be messed up. My 1999 chevy s10 had a dysfunctional horn I had to remove the airbag from the steering wheel to access the wiring harness to the horn and i had a broken wire that caused the horn not to work I replaced that and problem solved. Also Your actual horn is usually located in your front bumper and that may be damaged if it is replacing it will fix the problem. Hope this helps good luck

Oct 03, 2014 | 1998 Chevrolet C2500

3 Answers

What would be the cause of a horn not working on a 2002 oldsmobile alero?

loose connection, remove front of steering wheel and check underneath. theres a copper ring, that when you press the horn it should make contact with another copper bit . or you need a new horn (where the sound actually comes out), or the 2 wires that go into the actual horn have come loose. you can find the actual horn usually by looking under the front of the car.

Sep 06, 2014 | 2002 Oldsmobile Alero

1 Answer

Horn and Panic alarm not working

horn is bad or not connected more than likely

Feb 11, 2014 | Mercury Sable Cars & Trucks

1 Answer

How to install horn on a 1999 yukon

If the relay clicks when the horn button is pressed the horn is the problem, if no then the clock spring contact under the steering wheel is defective. The horn is under the car behind the front bumper area.

Oct 21, 2012 | 1999 GMC Suburban

4 Answers

My 1990 cutlass ciera's horn won't blow. I can hear a clicking sound coming from the glove box buys that's it. Also my display that reads low fuel, trunk ajar, etc. does not light up, could the two be

the clicking noise you hear when trying ot honk the horn is the relay.this to me indicates that everything from the horn button out to the horn is good otherwise the relay wouldn`t click.there fore the horn itself is the problem and needs is located at the front of the car around the side of the rad area or under the front part of the car fender on one side or the other.the other problem could be a bad fuse and should be checked with a test light.

Nov 11, 2011 | 1990 Oldsmobile Cutlass Ciera

1 Answer

How to fix horn

First go to horn, its in the right side (passenger side) very front behind bumper. Turn wheel to the right, remove inner fender well, locate horn. Check to see if you have 12V there when the horn is activated to ensure its not just a horn. If there is 12V and ground and horn doesn't sound, you'll need a new horn. If voltage is good then back track to the horn relay, it should be under the hood electrical center (some earlier models were under the dash below steering wheel. If you press on the horn in the steering wheel, you should hear it click to locate. If not check the black wire going up the steering column, when jumpered to ground and horn sounds then the problem is inside the steering wheel, horn ring or contacts on the pad are faulty.

Feb 01, 2011 | 1997 Chevrolet Cavalier

1 Answer

Horn doesnt work after replacing under bumper

check and see if ground wire was removed during front bumper re-installation

Jul 27, 2010 | 1994 Lexus Es 300

1 Answer

Where is the horn located on a1997 grand cherokee

The horn on the 1997 Jeep is located on the steering wheel.

The actual sound part (horn) is located under the front right side of the front bumper. If you stand in front of the jeep and stick your hand in the left most cutout hole on the bottom of the plastic bumper cover, you can touch the dual horns as well as remove them and replace them.


I really hope help with this. Remember rated and comment this post.

Mar 10, 2010 | 1997 Jeep Grand Cherokee

2 Answers

1996 Saturn SL. Horn doesnt work. Fuse is ok. Can't find horn under hood.

it is behind bumper drivers side. I believe there is a relay in the horn, making the horn unique and origional replacement required. if it has three wires in it then it has built in relay.

Oct 06, 2009 | 1996 Saturn SL

1 Answer

1999 acura integra horn

The "click" is the relay working. look under the front bumper to find the actual horn and replace it. the wire should slide off a pin on the back of the horn.

Sep 01, 2009 | 1999 Acura Integra

Not finding what you are looking for?
1994 Honda Civic Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides