Question about 1996 Hyundai Accent

2 Answers

#1 cylinder misfire has gd spark,fuel + compression, replaced ,wires + plugs any idears woul be greatly apreciated

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 32 Answers

Replace your coil pack. It's the part that distributes the power to the plugs and wires.

Posted on Feb 14, 2010

  • John McCallum
    John McCallum Apr 26, 2010

    I have the same problem with the same symptoms, except my misfire is in cylinder 4 and I have replaced all that you have replaced including my coil pack and still nothing. Misfire still there. Maybe we can brainstorm it and help each other out. Good Luck!

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Hyundai Master
  • 752 Answers

Do you have a coil check it newer cars have coils that go directly over wear you plug it into spark plug

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't find the miss fire, on my 05 check impala I replaced my spark plugs and wires and a small hose


Hopefully your trouble code will tell you which cylinder, like p0302, cylinder number 2, check fuel--spark--compression on that cylinder. If you get a p0300 code, means the computer thinks there is a misfire, but, can't identify which cylinder?
How long since overall tune-up? Spark plugs and wires are great, as far as it goes.

Oct 23, 2016 | 2005 Chevrolet Impala

1 Answer

Have a misfire in cylinder 6 changed all coil packs all spark plugs stills says cylinder 6 misfire


A misfire could be caused by almost anything, spark--fuel--compression. Did you check for spark at number 6? All electrical components have voltage and ground, if problem on wiring circuit, replacing the component won't fix it.
Also, check for fuel injector pulse--proper fuel pressure and cylinder compression.
I don't know year--make--model, it didn't post for some reason?

May 16, 2016 | Cars & Trucks

1 Answer

Why is there a cylinder 2 misfire?


Check these three things in the misfiring cylinder: spark, gas, and compression. One of them is wrong or missing. For spark check the spark plug and wire. Make sure you have spark on the plug wire, a strong blue spark. For gas, the fuel/air mixture may be wrong. Does the fuel injector pulse, putting gas into the cylinder? Possibly you may have a leaking injector or a clogged injector.

If gas and spark seem okay, you need to check compression in the cylinder. Low compression will cause a misfire. If compression is 20 or 25% lower than adjacent cylinders, that could be causing a misfire. For example, say numbers 1 and 3 cylinders had about 150 psi compression. 80% of 150 = 120, so if cylinder 2 is 120psi or less, that could be setting the misfire code. Low compression can be caused by valves not seating well, or bad piston rings, bad head gasket- something in the combustion area of the cylinder is losing compression.

Aug 17, 2015 | 2006 Mazda Tribute

1 Answer

Misfiring.


need do a tune up change spark plugs and wires.clean fuel injectors and change fuel filter.if engine equiped with distributor replace distributor cap and rotor.if vechicle still misses.could have bad ignition coil or cylinders have low compression.

Jan 13, 2013 | 1994 Toyota Corolla

2 Answers

Misfired in number 2


could be plug or plugwires...have a tuneup maybe ??

Aug 21, 2012 | 2001 Oldsmobile Silhouette

1 Answer

2003 Hyundai Sonata with 4 cyl. PO301 error code. Have replaced spark plugs, wires, coil packs, and mass air flow sensor. Replaced air filter due to heavy gas smell. Car was starting after tapping gas 3...


P0301 - Cylinder 1 Misfire Detected.

Possible Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak at cylinder

Possible Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

Being you have a heavy gas smell I would look into the injectors. If injector #1 is over producing it can cause a misfire. Test your compression and fuel pressure.

Jan 17, 2011 | Hyundai Sonata Cars & Trucks

2 Answers

Have a misfire on cylinder 3


Hello
Here is what to check let me know if you need help checking this out
most common misfire causes on the cars I've worked on have been:
  1. Spark plugs
  2. Spark plug wires
  3. Ignition coil
  4. Fuel injector
  5. Wiring to fuel injector
  6. Timing Belt
  7. Vacuum leak or stuck open EGR
  8. Contaminated fuel or bad fuel pump
  9. Weak compression
  10. Blown head gasket

Jul 14, 2010 | 1998 Dodge Durango

4 Answers

I have a ford explorer 99 but it's giving a error code PO306 what do u think it is


It sounds like a misfire. Check spark plugs 5 and 6. It could be bad fuel, bad plug wire, or weak coil. Check the fuel injectors as well. Other possible causes could be an egr valve stuck open, vacuum leaks, low fuel pressure.

Feb 17, 2010 | 1999 Ford Explorer

5 Answers

Hi, I have a 1997 Porsche 993. Motronic 5.2 M07. I am getting these fault codes 1) 62 misfire emissions-relvant 2) 51 Cylinder 2 misfire emissions-relevant) 3) 54 Cylinder 5 misfire ...


misfire :-------- try checking your 02 sensors /fuel pump and filter.

for 51 cylinder misfire :---
Change the coil. Period. Very easy to remove from the vehicle if it's a 4 cyl. Follow that spark plug wire from the spark plug to the other end. What it's attached to you should replace
for 54 cylinder 5 misfire :---First you have to eliminate the most obvious problems, like spark plug and spark plug wire. If you replace those and you still have a misfire, then it's a good idea to look for a vacuum leak in the intake manifold

Mar 07, 2009 | Porsche 911 Cars & Trucks

Not finding what you are looking for?
1996 Hyundai Accent Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...