Question about Mercedes-Benz Infrared Remote Control Mercedes Slr Mclaren Rc Car

1 Answer

I replaced my rearview mirror on my 1996 mercedes sl320. How do I get the remote entry IR system to work now?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,068 Answers

It will need to be mated to the vehicles computer and you will need a factory scanner/computer to do so.

so the dealer is one of the only people that can do it. some independent shop will have it also.

please ask any more question you have and thank you.

thank you for using fixya.com.

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2012 hyundai tucson setting the garage door opener that is located in rear view mirror


Thanks filter4991;
1. Press and hold button on car's rearview mirror
2. Press and hold button on garage door opener's remote control.
3. Light on Rearview mirror will flash rapidly.
4. Release both buttons.
5. Locate learning button on garage door opener (generally this can be found by tracing the antennae to where it is attached to the unit.)
6. Press and release "Learning button"
7. Press and release rearview mirror button repeatedly until garage door opens/closes but it should work the first or second time.

Worked on Genie Intellicode and Hyundai Tuscon

Sep 20, 2012 | Hyundai Tucson Cars & Trucks

2 Answers

Mercedes benz e230 1996 manual rear view mirror. need assembly drawing


1996 MB 300 D
My rear view mirror was dancing around. I took the mirror down because it was loose and the clips fell out.How do I re- install the retaining clips?

Jan 07, 2011 | 1995 Mercedes-Benz E-Class

1 Answer

How to replace rearview mirrors on yukon 1996


The replacement of outside rearview mirrors is straight-forward and can be done in an hour or so. If you need new power mirrors, first shop with local body parts suppliers in your area. The after-market mirrors are nearly identical and can be purchased for about $20-$30 per side. Remove the plastic triangular cover over the inside of the mirror by lifting up at base and then release clip at the top which is an upward motion off of a slot in the rear of the triangle. Then pull out the foam insulation carefully. The 3 nuts are 10mm and a long scket works best. For the one at the very front, you will have to use an open end wrench to loosen the nut. There is not much room for a socket. Be carefull to not drop the nuts down the inside of the door, because you don't want to remove the door panel and then the inner metal panel to get them out. If you lose them, buy new ones or replace with proper treaded ones in your garage. After the three nuts are off you need to disconect the wiring. Stop here and make sure you have enough slack in the wiring to be able to hold the female end securely, while you refit your new mirror. I took a piece of wire an dwrapped it around the female end to keep it within reach to re-attach the wiring after the nuts are tightened. Then just replace your foam insulation, and install the triangular cover and you're all set.

Nov 30, 2009 | 1996 GMC Yukon

1 Answer

94 SL320 randomly does not start


starter my be going out have it tested or it may be the alternator

Jul 27, 2009 | 1994 Mercedes-Benz Mercedes Benz Sl Class

1 Answer

Neither of 2 standard fobs works


try
sit in the car
point remote at the mirror ir sensor (1995)
press remote twice and within 30 second
insert key and turn to drive position
if you don't havemirror mounted ir sensors
point at your sensor location

Jul 11, 2009 | 1994 Mercedes-Benz C-Class

1 Answer

How do I fit a drivers door glass mirror to a Mercedes SL320?


There is a good set of instructions at www.benzworld.org Do a search for outside mirror replacement and i think you'll find all you need to get this accomplished.

Mar 28, 2009 | 1998 Mercedes-Benz SL-Class

1 Answer

Reattaching a rearview mirror on a BMW


Small little trick, Clean everything well and wipe it with acetone.  Use your hot glue gun to glue it back on.

Works actually pretty well.
I hope this helps
:)

Feb 19, 2009 | 1996 BMW 318

1 Answer

Control Review Mirror. Being able to adjust it


Where is your side mirror adjustment knob? If you turn the directional straight up to 12:00...That adjust your rearview mirror.

Sep 08, 2008 | 2002 Mercedes-Benz S-Class

1 Answer

C220 - 1996


1. Mechanic needs to check cold start relay
2. Check switch, it is probably stuck
3. Panasonic CR 2032 3V
4. Mechanic needs to check IR security system

Jul 19, 2008 | 1996 Mercedes-Benz C-Class

Not finding what you are looking for?
Mercedes-Benz Infrared Remote Control Mercedes Slr Mclaren Rc Car Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...