Question about 2000 Ford Ranger SuperCab

2 Answers

2001 ford ranger, can't remove two lines to the fuel pump that have clips holding them on

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 28 Answers

Your local parts store will have the tool to do this. Resembles a pair of plyers with a cone jutting perpendicular to the jaws. Insert the tool over the fuel line, slide it into the fuel pump fitting and pull the line back. Requires you to push and pull at the same time. Tell the parts counterman what you're trying to do...he should know what you need.

Posted on Feb 08, 2010

Push line on,squeeze colored tab and pull off

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing the fuel filter


This post is unclear.
If you're asking how to change the fuel filter, it's located INSIDE the gas tank, accessible through the trunk. You need to lift the cover with the electrical cord in it, disconnect another plug and two gas lines, then remove six(6) metric screws to get to the filter (and pump). Another gas line needs to be disconnected, the pump plug then is unplugged, the pump nylon clips gently pried off at five(5) locations, and pump removed from the filter and two(2) holding clips. The gas filter then can be replaced.

Aug 29, 2013 | 2001 Ford Explorer

1 Answer

I removed 3 relays from my ford ranger 2001 6 cilinders 3.ol and know idont know what is the fuel pump relay.can you help me how to know what is the fuel pump


they are listed in your owner manual. or go to motorcraft.com, procenter, tech info, owner manual.

fuel pump relay is 46A

4 relays in bottom left corner. it is lower right of the 4.

Dec 27, 2010 | 2001 Ford Ranger Regular Cab

1 Answer

How do i change fuel filter on 1987 ford ranger 2.9 liter


look under truck at drivers side door for the fuel lines. they will go into filter there and back out of filter there.you're looking for a round canister,you'll need to release the pressure by removing the gas acp also.there will be a plastic clip on both sides of the filter holding the fuel lines into the filter. pull those clips out with needle nose pliers, install the filter with the flow towards the front of motor, reinstall those clips unless new ones came with the new filter.keep in mind that you are under the truck looking up at filter, eye protection is a must!!!! hope this helps!!

Aug 23, 2010 | 1987 Ford Ranger

1 Answer

Fuel pump replacement for a Ford 1991 Ranger


Remove the gas tank when first emptied out. The pump is inside of the tank. Have the tank supported upon removing so the lines can be removed next then drop it down to remove the top retaining nut to remove the sender with the pump

Apr 18, 2010 | 1991 Ford Ranger Supercab

1 Answer

How to remove fuel lines from fuel tank 2001 Ford Ranger


special tool (about $15 at any parts store). It pushes in around the fuel line to release a clip inside , then the fuel line just slides off. Sometimes takes some wiggling and jiggling.

Mar 27, 2010 | 2001 Ford Ranger Regular Cab

1 Answer

Fuel pump


There are two metal straps that hold the tank in the vehicle. First you will need to disconnect the filler neck from the tank and any other black vent hoses that will pose a problem. Place a floor jack under the fuel tank and remove 2 bolts (1 in each strap). Then carefully lower the tank. You will need a special tool for the actual fuel lines where they are connected to the pump. It is called a quick disconnect tool. Once the tank is free of the vehicle you will see the pump housing on top. Most likely has about 8-8mm bolts that will need removed-and there is your fuel pump.. Labor guide calls for 2hrs -normally takes about 45mins to complete..

Dec 03, 2009 | 2001 Ford Ranger Regular Cab

2 Answers

How do i change a fuel filter on a 2001 f150


The clamps are just a secondary lock, special tools are needed to unlock the fuel lines.

Nov 05, 2009 | 2001 Ford F150 Styleside SuperCrew

2 Answers

How do I remove the fuel Tank on a 1996 ford ranger?


You need to seperate the tank and pump for tank to be able to be seperated from vechical or you can attempt to remove the fuel lines. and all you need to do is release the tank straps with a 9/16 socket and be sure it is supported and low in gas. To gain access to the fuel pump, it is necessary to remove the fuel tank.
  1. Depressurize the fuel system and remove the fuel tank from the vehicle.
  2. Remove any dirt that has accumulated around the fuel pump attaching flange, to prevent it from entering the tank during service.
  3. Turn the fuel pump locking ring counterclockwise using a locking ring removal tool and remove the locking ring.
  4. Remove the fuel pump and bracket assembly.
  5. Remove the seal gasket and discard it.

To install:
  1. Put a light coating of heavy grease on a new seal ring to hold it in place during assembly. Install it in fuel tank ring groove.



0900c1528018ee69.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 1: Fuel pump and sending unit used on the Regular Cab Ranger pick-up

Jul 10, 2009 | 1996 Ford Ranger SuperCab

1 Answer

Name of toll to release the fuel filter lines?


ford has several different sizes for full size, not sure about rangers though. They are called fuel line tools though. Did you blow air through the connecters to remove all dirt? How about removing the metal clips that are there as a saftey measure? Those clips looke like a weird J shape that helps prevent accidental disconection.

Jun 14, 2009 | 1998 Ford Ranger SuperCab

1 Answer

Is the fuel filter inside the tank on a 2001 ford ranger. my truck sometimes is cranking and i have to pump the padel to help it get started, i think it could be the fuel filter or the fuel pump. what do...


the fuel filter is on the inside of the frame rail on the drivers side (about the size of a coke can), u will need a special tool to release the fuel line clips, these are cheap and availiable at parts stores like NAPA and Carquest.

Mar 03, 2009 | 2001 Ford Ranger Regular Cab

Not finding what you are looking for?
2000 Ford Ranger SuperCab Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...