Question about 1988 Oldsmobile Cutlass Supreme

1 Answer

I replaced my coils on my car. The car is 1988

I replaced my coils on my car. The car is 1988 Olds Cutlass Supereem Int. 2.8 L V6 and I need to know the firing order and the wire placement of the wires. I had marked them but it rubbed off in the middle of the project.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 137 Answers

You can google this info and get the firing order

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 Pontiac Bonneville with v6 3800 engine automatic trans. Car starts but has a dead miss in it you can up the throttle to half way and miss clears up. Put new plugs and wires on.


You probably have a bad coil , possibly ! Check out this video . It's a Oldsmobile but same ignition type ,just a four cylinder ! GM Ignition System diagnosis 1988 Olds Cutlass Pull the plug wires off of one coil at a time !

Oct 08, 2015 | Pontiac Cars & Trucks

1 Answer

How do you check the timing on a 1988 oldsmobile cutlass ciera 3.8


images for 1988 oldsmobile cutlass ciera 3.8 wiring

Need diagram for 88 olds 3.8 engine`firing order - Fixya

www.fixya.com/.../t9979847-need_diagram_88_olds_3_8_engine_firin...
Aug 3, 2011 - need diagram for 88 olds 3.8 engine`firing order - Oldsmobile 1988 Cutlass Ciera question.

Sep 24, 2015 | Oldsmobile Cars & Trucks

1 Answer

How to replace fuel injectors on a 1988 olds cutlass ciera v6


There is a You Tube Video you can watch
on GM Throttle Body disassembly

I would mail them away for testing & ultra-sonic
cleaning

Not likely the injectors are causing the dieing

Check for a worn timing chain & vacuum leaks

Dec 09, 2014 | 1988 Oldsmobile Cutlass Ciera

1 Answer

What type of ignition does 1988 cutlass ceria 3.8l have 1 or 2 ?????


BOTH types of ignition coils were used on 1988 Cutlass Ciera. Type 1 is a single unit with 3 coils built into it. If one coil goes bad, you must replace the entire unit. Type 2 incorporates 3 separate coils mounted on the control module. These coils can be replaced individually. (See picture below) You simply have to LOOK at your ignition coils to see which type your Cutlass is equipped with. Please note that these systems are NOT interchangeable.


dttech_140.gif

Jul 10, 2011 | 1988 Oldsmobile Cutlass Ciera

1 Answer

Need to know the firing order of sparkplug wires on a 1995 olsmobile supreme cutlass


For the 1995 Oldsmobile Cutlass Supreme:
I do not know if you have the 3.1L V6 or the 3.4L DOHC V6; however below are included below:

For the 3.1L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
........(back)........
|...1......3.......5...|
..........................
|...2.......4......6...|
.........(front)
Ignition Coil Connections:
...........(back)
.|5..2.|..|.3..6.|..|.4..1.|
...........(front)

For the 3.4L DOHC V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
.........(back).........
|...1.......3.......5...|
...........................
|...2.......4.......6...|
..........(front)
Ignition Coils Connections:
..........(back)
.|.1..4.|.|.3..6.|.|.2..5.| (Honestly: I'm thinking it should be 6..3 not 3..6)
..........(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!







Apr 14, 2010 | 1995 Oldsmobile Cutlass Supreme

3 Answers

I need the firing order for a 1996 olds cutless cierra with a 3100 please


Your order is 1-2-3-4-5-6
Coil packs:
5/2 3/6 4/1
Cylinders:
1 3 5
2 4 6

Hope this helps,
matt

Oct 14, 2009 | 1996 Oldsmobile Cutlass Ciera

2 Answers

1988 3.8 olds cutlass Ciera stalls, no spark until it cools down


Check the prrimary and secondary resistance on your coil. Also check the resistance of the plug wires and plug gap.

Aug 12, 2009 | 1988 Oldsmobile Cutlass Ciera

1 Answer

Coil pack on 3.4L engine for 1996 cutlass ?


Try “autozone.com” or your local library for diagrams and step by step instructions.

Mar 08, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...