Question about 2005 Ford F-150

Open Question

I have a 2005 Ford F150 with tail light problems. my DRL dont seam to be working. I have the headlamps and the front park lights but the tail lights will not come on. Break and revers lights still work as normal.i checked fuses, but cant find the problem. Bulds are fine.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 72 Answers

SOURCE: no headlights

You need to start by checking the fuse for your headlights (low beams). The DRL could be be bad, but I have not seen them go out very often.

Posted on Jun 08, 2009

Ad
  • 79 Answers

SOURCE: 2004 F150 Tail light problem

I would check your Auxiliary relay box. Check the R03 relay you might need to replace it. The Auxiliary relay box is located in the engine compartment (driver side)

Posted on Jan 31, 2009

  • 87 Answers

SOURCE: Blows fuses when parking lights are turned on. Headlights work fine even running lights.

If it only happens when you turn the switchto the parking lights then it is most likely the swich that is the problem. Light swich failure appears to be a common fault with fords

Posted on Apr 23, 2009

mnwarfield10
  • 452 Answers

SOURCE: i drive a jeep liberty renegade 2005 model break and tail lights

check brake switch under brake pedal... if not working change it..

Posted on Dec 30, 2009

  • 65 Answers

SOURCE: 2006 ford e250 van\r\rear tail lights dimmed and now dont work(.)

check the fuses and relays under the hood next to the battery. if they still dont work it might be in the wiring or if it has a tow package it might be in the trailer wiring

Posted on Feb 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why causes my park lights to remain on?


This could be caused by a number of things. Does the car have security.? Do the lights go out after a period of time? Some vehicles have a Sensor to turn the lights on and off. Some vehicles are equipped with daytime running lights. I do not think the latter is the problem. It could just be a problem with the light switch. Please comment and let us know if the lights stay or go off after a period of time

Sep 07, 2016 | 2002 Isuzu Rodeo

1 Answer

2000. Where is fuse for tail lights?


Do your headlamps work ?
Park/Marker/License/Tail Lamps
Voltage is applied to the turn/headlamp switch at all times. When the turn/headlamp switch is in the PARK or the HEAD position, voltage is applied to the following components:
?€¢
The park lamps


?€¢
The marker lamps


?€¢
The tail lamps


?€¢
The license lamp

The front marker lamps are grounded through the turn filament of the respective front park/turn lamp. The front marker lamps light as a result.
The automatic lamp control function turns on the park lamps and the headlamps. This action occurs when the ambient light sensor determines that the exterior lamps should be turned ON based on the amount of available light. When the BCM grounds the park lamp relay, voltage is supplied directly to the park lamps, bypassing the turn/headlamp switch assembly. When this action occurs, the following conditions exist:
?€¢
The automatic lamp control relay is grounded.


?€¢
The headlamps turn ON. Refer to Headlights/Daytime Running Lights (DRL) Circuit Description .

The lamps turn OFF when the BCM does not ground the park lamp relay or the automatic lamp control relay. This action is caused by the following conditions:
?€¢
The available light reaches a predetermined level.


?€¢
The ignition switch is turned to the OFF position

Mar 31, 2016 | Pontiac Grand Am Cars & Trucks

2 Answers

How to turn off the daytime running lights on my 2005 chevy equinox


you have to change daytime running lights module.For now remove cable from battery +

Mar 19, 2016 | Cars & Trucks

1 Answer

No low beam. Good high beam. No day lights. What's wrong?


No on the fuse . The LH HDLP and RH HDLP fuse in the fuse block - under hood, supply battery positive voltage to both low and high beam lamps at all times. For manual operation, when the headlamp switch is in the ON position, the headlamp switch supplies ground directly to the headlamps and to the body control module (BCM) on the headlamp low or high beam signal circuit, depending on the position of the headlamp dimmer switch. The BCM uses this signal to determine if the conditions are present to illuminate the daytime running lamps or park lamps.
The headlamps may be turned on 2 different ways. First, when the driver places the headlamp switch in the ON position, for manual operation. Second, with the headlamp switch placed in the OFF position activating automatic lamp control (ALC).For ALC operation, the BCM receives a signal from the ambient light sensor indicating a low or high ambient, outside, light level. Under low light conditions the BCM grounds the headlamp relay control circuit energizing the headlamp control relay. The now closed relay supplies ground through the headlamp switch to the headlamps and the BCM on the headlamp low or high beam signal circuit, depending on the position of the headlamp dimmer switch. When the BCM grounds the headlamp relay control circuit it also grounds the park lamp relay control circuit illuminating the park lamps. The headlamp relay is grounded at G203.
Daytime Running Lamps (DRL)
The low beam headlamps operate at reduced intensity when in daytime running lamps (DRL) mode. The ground circuit to the switch side of the DRL relay has a resistor in-line to reduce the intensity of the low beam headlamps for DRL operation. The body control module (BCM) receives a signal from the ambient light sensor indicating a low or high ambient, outside, light level. Under daylight conditions the BCM grounds the DRL relay control circuit energizing the DRL control relay. The now closed relay supplies ground directly to the low beam headlamps and to the BCM on the headlamp low beam signal circuit. The low beam headlamps now illuminate with reduced intensity. The DRL relay is grounded at G203. Any time the headlamps are illuminated the DRL will not illuminate. Manual park lamps do not effect DRL operation.

Feb 23, 2016 | 2005 Chevrolet Equinox LS

1 Answer

Why aren't parking lights working?


Park lamp fuse 20amp located in the under hood fuse box .DRL control module
Daytime Running Lamps (DRL) Control Module
Right of the steering column, behind the IP
Park, Sidemarker, Tail and License Lamps
Voltage is applied continuously to the PARK fuse to the headlamp and the instrument panel (IP) lamp dimmer switch through CKT 1340.
When the headlamp and the (IP) lamp dimmer switch is in the PARK or HEAD position, voltage is applied to CKT 9 thus activating the following lamps:
• The park lamps
• The side marker lamps
• The tail lamps
• The license lamps
The park/turn lamps are the only lamps that do not activate yet receive a current from CKT 9. The park/turn lamps do not activate because the voltage drop across the front side marker lamps is much higher than that across the turn lamp filaments Step
Action
Normal Result(s)
Abnormal Result(s)*

1
Turn the headlamp/instrument panel (IP) lamp dimmer switch to the PARK position.
The following lamps light:
• The license plate lamps
• The taillight lamps
• The front side marker lamps (Domestic)
• The front parking lamps (Domestic)
The headlamp position lamps (Export)
Refer to Park Lamps Inoperative
Park Lamps Inoperative
Step
Action
Value(s)
Yes
No

1
Inspect the PARK LP fuse.
Is the fuse open?
--
YES - Go to Step 2
NO - Go to Step 3

2
Repair a short to ground in CKT 1340.
Is the repair complete?
--
Go to Exterior Lights System Check
--

3
Turn the headlamp/instrument panel (IP) lamp dimmer switch to the PARK position.
Use a test light in order to backprobe the headlamp/IP lamp dimmer switch harness connector between terminal R and ground.
Did the test lamp light?
--
Go to Step 7
Go to Step 4

4
Use a test light in order to backprobe the headlamp/IP lamp dimmer switch harness connector between terminal O and ground.
Did the test lamp light?
--
Go to Step 5
Go to Step 6

5
Replace the headlamp/IP lamp dimmer switch. Refer to Headlamp Switch Replacement .
Is the repair complete?
--
Go to Exterior Lights System Check
--

6
Repair the following conditions in CKT 1340 between the PARK LP fuse and the headlamp and the IP lamp dimmer switch harness connector terminal O:
• A faulty connection
• An open circuit
Is the repair complete?
--
Go to Exterior Lights System Check
--

7
Repair the following conditions in CKT 9 between the headlamp and the IP lamp dimmer switch harness connector terminal R and S204:
• A faulty connection
• An open circuit
Is the repair complete?
--
Go to Exterior Lights System Check

Feb 18, 2016 | 1999 Pontiac Montana

1 Answer

Where is the fuse located for the daytime running lights on a 2005 Chev Siveraado?


It is located in the underhood fuse/relay box , marked DRL 10 amp fuse ! Also if that is good check the DRL relay in the same fuse/relay box .Your light sensor could also be bad .
The daytime running lamps (DRL) will operate when the ignition switch is in the RUN position, for automatic transmissions (A/T), the gear selector is not in the PARK position, the headlamp switch is in the AUTO position, and for manual transmissions (M/T), the park brake is released. When these conditions have been met and the ambient light sensor indicates daytime conditions, the DRL will illuminate. The ambient light sensor is a light sensitive transistor that varies its voltage signal to the body control module (BCM) in response to changes to the outside (ambient) light level. When the BCM receives this signal it will either turn on the DRL or the headlamps for auto headlamp operation. Any function or condition that turns on the headlights will cancel the daytime running lamps operation. The DRL can be manually turned OFF by depressing the AHL/DRL switch in the headlamp switch
Do you know that on inside of fuse box lid it shows what fuse is what .

Feb 01, 2016 | 2005 Chevrolet Silverado

1 Answer

Grand Prix 2003 first no running lights tail lights or cluster lights. All fuses were good. Changed out the small box under the steering column. Not the chime box. After doing that I had running lights...


Daytime running lamps control module. Fuse #37 - inside the passenger compartment or under hood fuse box ? Do you know how to use a volt meter an wiring diagram to find electrical problems ? You have a direct short to ground or fuse #37 wouldn't blow. Underhood fuse box fuse # 37 is for the park lamps .Supply's B+ voltage to the daytime running lamps module an the headlamp switch plus 37
PARK LP Fuse
20A
Headlamp Switch, Body Control Module (BCM), and Vehicle Interface Unit (VIU)...
Park, Tail and Marker Lamps
The park, tail and marker lamps, including the license lamps, are turned ON when the headlamp switch is placed in either the PARK or HEADLAMP position, or anytime the headlights are requested. The PARK LP fuse in the underhood accessory wiring junction block. When the headlamp switch is placed in the PARK position, battery positive voltage is applied to the park lamp circuit. The parklamp circuit then applies battery positive voltage to the DRL control module and to all the marker, park and tail lamps. The front park lamps are grounded at G101. The rear park lamps are grounded at G302. The license plate lamps are a part of the rear park lamp circuit and are grounded at G302 The inadvertent power control feature prevents the park lights from remaining on more than 10 minutes if left ON. If the park lights are turned ON after the ignition switch has been turned OFF, or is in the ACCY position, they will remain ON until turned OFF or the battery runs dead.

Finding The Source Of Electrical Shorts In Your Car

Jun 16, 2017 | Cars & Trucks

1 Answer

Dash lights & tail lights are not working but every thing else is need help to locate fuse for it 2002 ford f150


The parking lamp circuit feeds the instrument illumination fuse

The parking lamp fuse is engine compartment Fuse # 6
After the main headlamp switch the cab fuse panel fuse # 18 is the fuse for the instrument illumination.

Don't forget to turn the main headlamp switch to at least the park position when you test the fuse with a meter.

Oct 19, 2010 | 2001 Ford F150 Styleside SuperCrew

3 Answers

My 1997 ford f150's dash lights and tail lights don't work. All other lights work, and there aren't any blown fuses. Could this be a fuseable link problem?


there is a relay for those as well in the fuse box test the fuses for those tail lights and if they dont have power then its the relay.

Dec 10, 2009 | 1997 Ford F150 Regular Cab

1 Answer

1994 ford f-150 with day time running lights headlightnot working


Daytime Running Lamps
The daytime running lamp (DRL) system is designed to turn the high beam headlamps on, with a reduced light output, and without illuminating the high beam indicator lamp in the instrument panel. You have a DRL Module.
The multifunction switch is the stalk on your column.

This is 96 F150 circuit. Don't have 94.

51f651c.gif
Symptom Chart, Headlamps HEADLAMPS Condition Possible Source Action
  • Headlamps Inoperative
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • Blown fuse.
  • GO to Pinpoint Test A .
  • Headlamps On Continuously
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • GO to Pinpoint Test B .
  • High Beams or Low Beams Inoperative
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test C .
  • One High Beam or One Low Beam Headlamp Inoperative
  • Circuitry open/shorted.
  • Damaged connector.
  • Headlamp bulb damaged.
  • GO to Pinpoint Test D .
  • Flash-to-Pass Inoperative
  • Blown fuse.
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test E .



73d6d64.gif

Feb 25, 2009 | 1994 Ford F150 Styleside Supercab

Not finding what you are looking for?
2005 Ford F-150 Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...