Question about 1996 Chevrolet Silverado 2500

1 Answer

My starter ingages while trunk is already running

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 34 Answers

Sounds like either the starter relay is shorting or the wires going to the starter are shorting or touching at the starter

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 87 jeep starter stays ingaged when I try to start it


needs shimmed or the bendix is bad in the starter and not allowing to release. most likely just needs shimmed if it's a new starter, however you can get a bad starter (new or rebuilt)

Aug 28, 2012 | 1987 Jeep Cherokee

1 Answer

Starter will not ingage from the ingnition.


Not sure what you are jumping, but a mechanic would check for power at the key switch and the neutral safety switch.

Aug 16, 2012 | 2000 Ford Explorer

1 Answer

I just recently bought a 2005 impala..it has a few malfunctions that are rather apperent..sometimes the starter does not ingage when i turn the key switch, but i can go underneath the hood and short the...


Your starting problem is probably either in the key swithch, starter relay or you have a bad ground. I would check the starter relay first. Most often found in the interior fuse box, but you also have a fuse box insde the engine compartment.The overheating is most likey a faulty thermostat or water pump (if you havent checked it already). If you have a kinked line, replace it, it could be leaking, but ultimately it is not giving you the proper fluid flow pressure if it is kinked.
Please rate this answer! Thanks, Mike

Jun 13, 2011 | Chevrolet Impala Cars & Trucks

1 Answer

1996 ranger starter will not ingage,have installed new starter??????


Hi,

Did put the right wire in the right connection?
Test the starter by shorting the terminals on the solenoid and (+) solenoid cap.
If it engages the problem would be in the ignition relay or switch.
If it does not engages the but the motor runs the problem would be the the bendix gear drive!

Better yet the garage will check it thoroughly!

Apr 27, 2011 | Ford Ranger Cars & Trucks

1 Answer

Starter ingages while truck is running.


look for a fault in the ignition switch first ,like put a test light on the feed wire for the starter on the back of the ignition switch ,have a feeling it could be a broken contact spring and its loose inside the switch .

Jun 27, 2010 | 1998 Chevrolet C2500

1 Answer

My head lights only work when i keep the starter ingaged, also not charging. new alt batt and starter. 1984 chevy 3/4 ton


Replace the ignition switch,it only has aux.out put power in start position,not in the run position.

Jan 03, 2010 | 1984 Chevrolet C1500

1 Answer

The ignition switch is broke and i need to know how to replace it


what is happinen with the switch if its that the key dosen't spring back after the starter is ingaged it a ign box on the top of the searing collum you have to unbolt 2 bolts under the dash cover under the stearing collum and the box is on top of the collum bolted on one side with a rod from the key swich to the box to recall the key after the starter is ingaged

Jul 18, 2009 | 1984 Ford F 150

1 Answer

Starter


Bad ignition switch or starter seleniod

Sep 06, 2008 | 1991 Jaguar XJ6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...