Question about 2007 Chevrolet Avalanche LTZ

1 Answer

Turn the key to start all the lights go out except the check engine light and will not even attempt to start. Had battery and starter tested they are both good and changed the start relay still have nothing.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 80 Answers

No check engine sounds like ecm is bad. That lignt should be on until the engine starts. You can try to use a code reader from advanced auto or local auto parts store to see if you can get anything off of it.

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn key just a clicking noise. Lights come on. Check engine light on


A weak battery will make the lights come on & energize the solenoid for the starter, but the battery is too weak to make the starter motor turn. Checking the battery would be first, the solenoid second.

Oct 14, 2014 | 2003 Chevrolet TrailBlazer

1 Answer

Starting problem


1. Test battery (Should read 12.5-13v). If not charge or get tested, may need replacement.
2. If battery is good, take a pair of jumper cables, connect Black lead between (-) Negative side and the the block of the engine (often there are metal brackets, etc they make good connection points). Then connect the Red lead, between the the (+) Positive side of battery and JUST TAP the end to battery connection on the starter solenoid to see if engine turns over. CAUTION: Engine vehicle is in Park, parking brake set, and will not move before attempting this procedure.
2a. If this does not turn over engine, remove starter and have it tested at an auto parts store.
2b. If it does turn over there are two paths to further troubleshoot. (1) check battery cables. One way to do this is to turn the ignition key on, and attempt to start the car by the method described in 2.. BUT EXTRA CAUTION: Engine vehicle is in Park, parking brake set, and will not move before attempting this procedure. (2) if the truck did not start in (1), then you will have to wire trace the starting circuit checking all fuses, connections, etc. (local auto parts stores or often local library, carry Haynes Manuals that have wiring diagrams int the back)

Best of luck resolving this problem.

Dec 11, 2013 | 2002 Ford Ranger Regular Cab

2 Answers

2005 gmc yukon won't turn over even after replacing a new battery


does the security light come on? You might have to sit there with the key in the "ON" position for 10-15 minutes until the security light goes off to reset the security system.

Apr 21, 2013 | 2005 GMC Yukon Denali

1 Answer

Car will not crank and the timing chain is fine


Well, that's good, but even if the chain was broke, the starter would still be tryiing to start the car. Since your starter wont crank the engine over, your start circuit has a malfunction. Possibly the starter went out, so you need to have that tested for a malfunction. A simple test of part of the circuit is to turn the key to on.. Now your dash warnimg lights (oil, alternator, and check engine light) should be on. Are they on, and your gauges working? If not you have lost power to the ignition switch, so check your battery connections. If the key switch turns the dash on, then turn key to start. Do you hear a click from the engine area? If not, have the starter checked. If you do hear a click, or several clicks, then power from the switch is causing that click, probably at the starter. Turn the headlights on and observe them. Are they bright? If not, charge the battery up. If they are bright, watch them while a helper turns the key to start. If the lights go dim in start, probably a bad starter. If the lights don't dim, it could be a bad connection somewhere, like the battery or starter. Good luck

Jun 27, 2012 | 1999 Buick Century

1 Answer

Not getting power to the starter


Have you put a code reader in to help you detect the problem.? I know this sounds silly, but does the horn work? Check the manual for battery relay.

May 03, 2017 | 1999 Chevrolet Silverado 1500

2 Answers

06 pontiac grand prix wont start no clicking when you turn the key over even jump starting the battery, has dash lights & radio & parking lights. battery tested good. put a used starter & altinator on


Used parts such as starters and altinators don't last. It might **** but it sounds like you need to buy a new starter,altinator, and battery. Or just start with buying one at a time.

Dec 06, 2011 | 2006 Pontiac Grand Prix

1 Answer

My 1998 Accord will not start. When i turn the key it acts like the battery does not have enough power to turn the engine. I tried jumping but that did not help. I did notice that when the headlights...


It's possible that the starter or starter solenoid has failed. If you have a meter or test light, check for power at the battery cable connection to the solenoid. Try the starter, if the light goes out or the meter reads zero volts, suspect a poor cable connection at the battery end. If power remains, move the test to the starter terminal. If power appears when the key is turned, but no engine turning, replace the starter. Hope this helps!

Jan 20, 2011 | 1998 Honda Accord

1 Answer

Check engine light is on-starter hangs


it does sound like the starter is failing.... the next time it won't turn over.... have someone smack the starter with a hammer...while you attempt to start it... not hard enough to break it tho.

Robert

Feb 16, 2009 | 2007 Chevrolet Tahoe

2 Answers

2000 dodge intrepid won't start


check cables to battery.if battery is 5years or older replace.
a bad ground cable and a weak battery will cause the starter to do as stated.

Feb 07, 2009 | 1999 Dodge Intrepid

2 Answers

Having problems with turning over......


do you mean engine rolled over or cranked over and would not start?or is it that the starter would just click? or did starter sound like it was wineing and you had to keep on and off the key until it findley started? if any of your answers to thies questions is yes (except first question) its time for a new starter. as far as the grinding noise don't worry about it, that's what makes me believe its the starter. install new starter, problem solved.

Jan 18, 2009 | 2006 Ford Ranger

Not finding what you are looking for?
2007 Chevrolet Avalanche LTZ Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...