Question about 1999 Oldsmobile Intrigue

1 Answer

My rear back window will not go up - 1999 Oldsmobile Intrigue

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

If it's electric it could be that the motor is blown, check it for power and ground. if it has both then it's the motor, if not it could be a short somewhere along the wire. it passes through the floor so it's not too uncommon for them to gather moisture and corrode.
If it's a crank window and the window is just getting jammed try gently putting some wd40 in the sides as you try to move it up and down, also keep some glass cleaner handy to wipe off that wd40 after.

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to re attach supply hose to back window in T & C 2007


if the washer pump is working for the rear then you will have to remove the rear door interior panel and check the hose for a blockage and check and clean out the spray nozzle for the rear window. sometimes they get plugged and need cleaning.

Sep 18, 2014 | Chrysler Town & Country Cars & Trucks

3 Answers

How do i close back windows


There are 3 switches above the rear view mirror. The middle one controls the back windows. Push up to open and down to close.

Jun 13, 2014 | 2004 Lincoln Navigator

1 Answer

Master window switch for right rear will not roll window back up


corrosion in the switch from water driping on it while window is down. try cleaning connection and switch if doesn't work replace swich.

Mar 24, 2013 | 2001 Toyota Highlander

1 Answer

My rear windows (just rear) are inop on 92 chrysler lebaron conv


Check your fuse block first. If all is well, replace window motors.

Feb 28, 2012 | Chrysler LeBaron Cars & Trucks

3 Answers

My back automatic window went down and now won't come back up. No sound from motor. Checked fuses. Even took back seat apart but don't know what to do or what caused it. How can I get window to go...


it may need to be reset.

SECTION 501-11: Glass, Frames and Mechanisms 2001 Explorer Sport/Sport-Trac Workshop Manual
GENERAL PROCEDURES Rear Window Motor Initialization s1r~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Make sure that no obstructions are present in the power rear window system when carrying out this procedure.
NOTE: This procedure must be carried out when repairs are performed on any part of the power rear window system including when: the power rear window motor is removed from the window regulator drum housing, a new power rear motor is installed, a new power rear window regulator is installed, a new power rear window module is installed, and any operation in which grease or lubricants are applied to the power rear window system.
NOTE: All power rear window components (window glass module, window regulator, window motor, and glass runs) must be installed and torqued to specification before carrying out this procedure.
NOTE: Steps 1-6 must be completed within 30 seconds. The entire procedure must be completed within five minutes.
NOTE: Once the ignition key is turned to the ON position in Step 6, it must remain on until the entire procedure is completed.
NOTE: Steps 7 and 9 require that the power rear window control switch be held in the closed position until the power rear window motor stalls the window in the upper header seal. Step 8 requires that the window control switch be momentarily turned to the open position.
  1. Start with the ignition in the OFF position.
  1. Turn the ignition to the ON position.
  1. Press the power rear window control switch vent button six times.
  1. Turn the ignition to the OFF position.
  1. Press the power rear window control switch vent button six times.
  1. Turn the ignition to the ON position. The power rear window will move up-down-up-down approximately 20 mm (0.8 in). This movement indicates that the power rear window motor has entered initialized mode.
  1. Rotate and hold the power rear window control switch to the closed position until the window stalls in the upper header seal.
  1. Momentarily rotate the power rear window control switch to the open position and release. The power rear window will carry out a one-touch down operation until the window stalls at the bottom of the travel stop designed into the window regulator.
  1. Rotate and hold the power rear window control switch to the closed position until the window stalls into the upper header seal. Once this operation is complete, the window will move up-down-up-down approximately 20 mm (0.8 in). This movement indicates that the power rear window motor has been successfully initialized.
  1. Verify correct operation of the power rear window by moving the window to the fully open, vent, then fully closed positions.
------------------------------------------------------------------------------------
  • The power rear window is inoperative (Explorer Sport Trac only)
  • Circuitry.
  • Battery Junction Box (BJB) fuse 3 (30A).
  • Central Junction Box (CJB) fuse 20 (7.5A).
  • Power rear window control switch.
  • Rear window glass motor.
  • Go To Pinpoint Test K .

------------------------------

Sep 15, 2011 | 2001 Ford Explorer Sport Trac

2 Answers

I have a 2003 ford crown victoria police car back power windows,only work from front buttons do not work from rear door buttons,works great from front


most police cars either did not come with the wiring in the rear doors, or was removed during conversion. they are typically a wiring nightmare, and everyone of them is different. you just have to dive right into it and try to find where the wiring modifications were performed. good luck!

Jun 15, 2010 | 2003 Ford Crown Victoria

2 Answers

Drivers window will go down but not up


It may be that it is not on the track properly or your power window motor is old and tierd and can take the window down but it doesn't have the juice in it any more to bring it back up. replace the motor and it will work. This problem happened to me in my '76 ford ltd and a new motor fixed it.

Oct 10, 2009 | 1995 Lincoln Town Car

1 Answer

M reg toyota surf rear electric window jammed /won't close


check to make sure the rear windsheild wiper is in the Park position, meaning all the way up,ifit is not there is alock out to stop you from raising the rear window, get back to me if you need more help as i strive to be the best, please rate my fix

Mar 26, 2009 | 2001 Toyota Land Cruiser

1 Answer

89 ford mustang convertible


This is a professional job for a conv. top shop. has to be sewn in at the bottom.

Removal
NOTE: Mark vinyl to be removed so it can be returned to the same position after disassembly.
  1. Remove sail area panels as outlined.
  1. Remove staples retaining elastic straps at each side of back window glass (42006) to rear tacking strip and folding top rear number 4 bow (51278) and remove elastic straps.
  1. Remove staples retaining rear bow corner pad (537A71) and bottom of folding top back window curtain (52500) to rear tacking strips.
  1. Remove staples retaining top of folding top back window curtain to folding top rear number 4 bow and remove back window glass .
1994 mustang. don't have 89 Window, Rear Installation
NOTE: Transfer markings from the removed assembly.
  1. Mark with grease pencil center point on folding top rear number 4 bow in line with hole on rear of folding top rear number 4 bow .

Oct 07, 2008 | 1989 Ford Mustang

4 Answers

Back door wont open and window wont go down


The rear window has to be completely down in order to move the tailgate! You should be happy that your window is stuck up, unlike mine which is stuck all the way down! I have to completly take apart my tailgate!! If you want to try a trick to get the rear window down, my bronco has a rear window switch right next to the headlight knob, take the 2 purple wires on that window switch, and cross them, if your motor still works and if the wires are good, that should make the window go down!!! good luck, hope that helps!

Oct 05, 2008 | 1995 Ford Bronco

Not finding what you are looking for?
1999 Oldsmobile Intrigue Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...