Question about 1989 GMC Suburban

1 Answer

What kind of axle is on the front of my 89 3/4 suburban

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

I do not know but give these websites a try www.alldatadiy.com and www.autozone.com i also like to give you this information if you every have any hard to find GM-parts its Schram auto & truck parts 1-800-292-1032 and they website is www.schramauto.com wish you the best of luck Michigan Man.

Posted on Feb 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 Chevy Suburban stuck in 4wd


Hi Dale, Sometimes the front diff becomes wound up. I am not saying this is the problem with your vehicle but what I'm about to suggest may work as it often does with other four by fours. Make sure you have a clear space to drive the vehicle backwards and forwards at a slow speed. As you do so select the two high position on the selector. You may need to reverse and go forward several times. Hope it works for you. Regards John

Aug 21, 2012 | 1999 Chevrolet Suburban

1 Answer

How do you check the fluid on the front axle on a 1999surburban


There should be a plug on the axle housing near where the front drive shaft meets front axle I think on drivers side inline with drive shaft.Remove plug,Fluid should be at bottom of hole.

Dec 06, 2010 | 1999 GMC Suburban

1 Answer

Removal diagrams 89 suburban 4x4 1/2 ton rear axle ring and pinion gear or gow to please help


Gear removal is simple...setting it up after a gear change requires an expert or it will quickly self destruct. I recommend that you replace the unit "drum to drum" then your only concern is to match the exact gear tooth count of both ring and pinion gears so you don't destroy the transfer case.
(a mis-match front to rear will do that) There are usually a good number of complete units in scrapyards and they are far cheaper than new.

Oct 05, 2009 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

Where to put the rear axle oil in and what kind of oil?


the rear axle takes 85-140 gear oil if you have limited slip you have to also add a friction modifier to it. you have to fill it from the level check plug about halfway up either on the differential cover or on the front of the third member depending on the axle that you have

May 17, 2009 | 1996 GMC Suburban

1 Answer

What kind of transmission is in my 2wd 1989 suburban


In the 89 model the 1/2 tons came with the R700(4L60)
and the 3/4 tons came with the T400 (3L80)

Please rate this fixya



Jan 26, 2009 | 1989 GMC Suburban

1 Answer

4 wheel drive not engaging


I do not have a vacuum diagram for the 89 Cherokee, but my 89 had the same issue several times and all it was is that the block of vacuum lines that go into the front axle on the rear of the axle on the passenger side of the vehicle. I ended up having to put a zip tie around the axle and hose block to hold it on. Have not had the issue again since doing this. Hope that helps.

Jan 23, 2009 | 1989 Jeep Cherokee

1 Answer

Change axles on a 2003 suburban 1500


The axles are about $100 each. The short version is you must jack up the front end. Then support the car by the frame and let the suspension hang. Bust loose the lower ball joints and sometimes a tie rod. Remove the large axle nut at the center of the hub and knock the axles out of the hubs, them remove them from the front axle center section. In reality its not quite so easy, but it is do able. You can probably go to the local library and take a look at a maunal for your vehicle and get a little better idea.

Jan 16, 2009 | 2003 Chevrolet Suburban 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...