Question about 2001 Dodge Ram 3500 Truck

1 Answer

2001 Dodge Cummins, in park, can only rev motor to

2001 Dodge Cummins, in park, will only rev motor to 2000 rpm before motor stalls and returns to idle repeatedly. Motor will not die, only returns to idle. Acceleration very slow and causes automatic transmission to not advance gears, especially on any incline.Occasionally, trouble code will disappear and truck will run fine and then shortly return if any attempt to accelerate rapidly. Fuel filter and transfer pump were recently changed.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Nwbombers.com
Research the trouble codes.....my '01 had a similar problem, turned out to be the CPS (Cam Position Sensor).
Easy fix.....10mm nut and unplug/plug in and reset codes and your done.
Dealer item.

Posted on Feb 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 jaguar xj8 when I drive it won't go over 3000rpm


Jaguar wont rev 3000 rpm Questions & Answers - Fixya

www.fixya.com > Forum > Tags > wont rev 3000 rpm
1998 Jaguar XJ8 won't rev over 3000 rpm ... Wont go beyong 3000 Revs s type 2001, wont go beyond 3000 Revs and it' in limp ... Question about 2002 X-Type ... My jaguar xjr8 year 2000 battery went dead started car went for short drive back ...

Jaguar engine cuts 3000 rpm Questions & Answers - Fixya

www.fixya.com > Forum > Tags > engine cuts 3000 rpm
1998 Jaguar XJ8 won't rev over 3000 rpm ... engine cuts out and shudders at 3000 rpm won't accelerateobd code p0332 2002 jaguar x type 3.0 l P0332 - Knock ... Car is boging out in park and will not go over ... driving, don't worry about it.

Rev Won't go up

www.jaguarforum.com/showthread.php?t=14662

Dec 15, 2015 | Jaguar Cars & Trucks

2 Answers

2000 pontiac grand am 3.4 motor auto trans 4 door.Car starts and drives okay motor seems to stumble slightly between 3000-4000 rpms. with car stopped in park try to rev motor will only go between 3200-4000...


Hi Tom your vehicle is equipped with a Rev limiter it will not allow you to rev the engine above 4000 with the trans in park; as for the first problem you may have one of two things, one of the spark plugs or spark plug wires is bad or you have a flat spot on the throttle positioning sensor in which case have be replaced. Good luck?

Mar 10, 2011 | 2001 Pontiac Grand Am SE

1 Answer

Dodge Ram 2500 Cummins Diesel 2001. Starter hangs up when start


Have you had a mot or try checking with an mechanic¬!

Jul 29, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

How do i set the timming on 94 mercury villager van


you only set base timing to 15 degrees BTDC (before top dead center).

Ignition Timing
  1. s1v~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Parking brake control should be applied.
    Depress the parking brake pedal, and warm the engine to the normal operating temperature.
  1. Turn off all electrical loads.
  1. Rev the engine to 2000-3000 rpm two or three times and allow the engine to return to the idle.
  1. Turn off the engine and disconnect the throttle position sensor electrical connector. (not really necessary)
  1. Start the engine and rev it to 2000-3000 rpm two or three times and allow the engine to return to the idle.
  1. Check the idle speed. The idle speed should be between 700-800 rpm in PARK (P) or NEUTRAL (N) position.
  1. NOTE: Make sure that the timing pointer is pointing to the 15° Before Top Dead Center (BTDC) mark on the crankshaft pulley. Each notch on the crankshaft pulley represents 5 degrees.
    Check the ignition timing with a timing light.
632206b.gif go here for villager help

http://autos.groups.yahoo.com/group/villagerquest/

Jun 09, 2009 | 2001 Mercury Villager

1 Answer

2001 dodge ram will not idle stalls in lower rpm


its not the fuel filter sounds more like a bad ais motor

Dec 14, 2008 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

Isuzu rodeo 2000 stalling out and rmp reving....


on 98 and up 3.2 and 3.5 v6 engines the intake gaskets are plastic.....thy crack and the truck runs rough.....listen for hissing sound or a check engine light....p0171 lean.
good luck

Nov 23, 2008 | 2000 Isuzu Rodeo

2 Answers

I have a 2001 dodge 2500 with a cummins,and a 6 speed the truck will move on flat ground,but if you step on gas motor will rev. The truck was parked for about 2 weeks. It has 135,000 miles on it. Is my...


its the clutch,the more you try to make it move and it revs the more damage you can do as your making intence heat by it slipping,a usal tell tale is that it smells like burnt eggs,hope this helps if it does vote me a fix ya

Jul 15, 2008 | 1996 Dodge Ram 2500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...