Question about 2004 Jaguar S Type

2 Answers

Turning signal lights stay on even when car is shut off turning signals will not work lights just stay on solid not blinking

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Jaguar Expert
  • 322 Answers

It would seem that your flasher unit has failed in the ''on'' state. The reason it stays on when the ignition is off is that it is wired to work on the 'hazard' setting. check flasher unit and also cables for shorting.
Hope this helps - good luck!

Posted on Feb 10, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 80 Answers

Check your flasher, should be some wear near the fuse box

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alpha Romeo 156 My Left hand indicator light stays on continually, does not flash. and when I turn the hazard light switch on both indicators continually glow.


Generally speaking, symptoms of a bad or failing turn signal bulb are usually the culprit...in your case, either it's the front left or rear bulb. Varies for different vehicle makes...common signs include:
  1. turn signal light staying on solid
  2. or blinking very fast
  3. or either sides of the bulbs stop blinking altogether.
To test this, make sure you reconnect everything you disconnected.
Turn the left signal light on; go to the front of the vehicle, is the turn signal bulb illuminated? If it lights up, even though it is not blinking obviously the bulb is okay. If it doesn't, replace it- problem solved. You'll do the same procedure for the rear turn signal Is that lit up? If not replace the bulb and the problem is solved.
Another common failure is when the turn signal blinks really fast, same procedure as mentioned above.
If both bulbs for the left side and right side illuminate but don't blink, the problem is in the steering column turn signal switch.
If the left or right side blinkers don't work properly at all...then check the integrated hazard warning/turn signal flasher relay- that may be defective; again, that's usually the case if both sides of the signal light don't work.
If you are blowing any fuses related to the flasher system, you have an electrical overload in the turn signal circuitry.

Feb 12, 2017 | Cars & Trucks

1 Answer

My turning signals don't blink on the outside and stays illuminated on the inside and also the front outside. My turning signal fuse is also well. I've noticed that my back up lights stopped working. Would...


Usually if you turn on your turn signal and it stays lit solid inside, it's telling you the bulb is bad in your turn signal outside. I would check your bulbs first. Same for the backup lights.

Jan 14, 2015 | Cars & Trucks

2 Answers

My right rear turn signal stays solid, won't blink, in the vehicle the right blinker light blinks excessively fast, I have a 1999 surburban


Sounds like a bad ground to me, although i am no expert.
i would be checkinh all connections and take it from there, a little wd40 might just solve it short term.

Nov 26, 2011 | 1999 GMC Suburban

1 Answer

My 1994 ford ranger is have lighting problems, when my dashboard lights are turned on, my hazards in the back stay solid, and then my left turn doest work, it just stays solid when i turn it on, but when...


Check grounding at start of the wires coming from under the truck you will proble find a corried ground wire whitch cause afeed back to other lights thus completing circuit.

Aug 18, 2010 | 1994 Ford Ranger Supercab

1 Answer

Turn signals won't blink


relay is bad turn signal relay

Jul 31, 2009 | 1998 Dodge Durango

1 Answer

Turn signal blink 2 or 3 times then stops and just stays on a solid light


See if one or the other bulb is out when it stops blinking. If yes, change that bulb. If no, replace signal flasher.

Jun 03, 2009 | 2004 Chevrolet TrailBlazer

1 Answer

1998 ford taurus left turn signal blinking fast


Replace the bulb that stays on and doesn't blink, if that doesn't solve the problem, let me know.

Apr 13, 2009 | 1999 Ford Taurus

1 Answer

Indicator lights no longer blink its one solid light


Im Not Totaly Sure But Most other Makes & Modles Ues 2 Seperate Signal FLASHER Units
Your Owners Manual Should Show this As Turn Signal "FLASHER" Located At or Near Fuse / Relay Box This is ASUMING you have Checked The Fuses and Relays

Feb 09, 2009 | 2000 Mazda Protege

Not finding what you are looking for?
Cars & Trucks Logo

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...