Question about 1996 Chevrolet C/K 3500

1 Answer

Blinkers dont work do i need to take dash appart to get to the fuse

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 71 Answers

This could be several things that can cause this but it sounds like the blinker flasher is gone bad. It is or should be mounted with or near your fuse panel. It will be about 1 inch round and about 1 to 2 inches tall. All auto parts store carry these and I would reccommend going by there and looking at the part so you will know what to look for. You can probably change it in the parking lot of the store. They simply pull out and plug in. I hope this is all that is wrong for you. I have also read some forums that that dash clusters in that year model truck are bad to short out but usually you will have signs of that before it goes. Good luck, Roger

Posted on Feb 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My blinkers dont work,guages,my fuses are good


Have you check to see if your hazards are working.(unplugged them for any reason) just make sure that the hazards are plugged in.

Feb 15, 2015 | 1994 Buick Skylark

1 Answer

Blinkers and hazards dont work


check the flasher relay under the dash

Mar 02, 2014 | 1996 Mercury Sable

1 Answer

Blinkers dont work


It is a Square under the Dash, if you turn on your 4 Way Flashers, put your Hand on it and that is the one you need to replace

Apr 15, 2013 | 1999 Honda Civic

1 Answer

My hazards or blinkers dont work? I have replaced the relay under the dash board still does not work. Fueses arent blown any help


I have the same problem. Changed my relay all my fuses are good. I have a 96 cougar. All kinds of electrical issues. Did you ever find out a solution? Can someone pleas help this problem

May 21, 2010 | Cars & Trucks

1 Answer

Blinkers don't work-fuse ok. Can't find the


they do tend to hide them, get under the dash with a light and search for the blinker, its round and about in inch, usually two wired going to it, it will be clipped on one of the dash support members,

Apr 21, 2010 | 1996 Chevrolet S-10 Pickup

1 Answer

Right Side blinker


It has a bad bulb. Find the bad bulb to fix this issue.

Apr 09, 2009 | 1994 Jeep Wrangler

1 Answer

Have 2001 Cherokee, for some time the blinker will turn on but not blink. If you moved blinker handle up and down they would work, Now it wont work at all. Dont know how to find fuse


likely your flasher unit was failing or you had a bulb out somewhere. Flasher should be on right side of steering column under dash yours could be a "combination flasher" Older models had flashers on fuse box under dash on left side.

Mar 10, 2009 | 2001 Jeep Cherokee

1 Answer

Blinkers


If you can turn the blinker on left or right and the light comes on but doesn't blink......Open the drivers door, there is a fuse box, On the side of the dash.. The relay willl be a small silver canister looking relay in with the fuses.. put your finger on it and turn the blinker on.. you should feel and hear a click...( With the key in the on position ).. That is what needed replaced if it doesn't keep clicking...Thats the turn signal relay... What makes it blink.......Hope this helps..
Please rate this solution if it helps... Thank You.....

Nov 04, 2008 | 1996 Pontiac Grand Am

1 Answer

Blinker dont work flasher and other lights work


The turn signals don't work, but the emergency flashers do? If that's the case, replace the flasher, you have 2 flashers, one for emergency (hazard) flasher, and one for the turn signals. It should be on the fuse block under the dash.

Oct 23, 2008 | 1995 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...