Question about 1993 Chevrolet C2500

1 Answer

Power locks stay lock cheched switches they are ok

Power locks stay locked checked switches they are ok

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 677 Answers

This is on 1 door or 2 ?
There is a small solenoid that does the work. Have you checked the fuse, make sure it is good, if so you will need to make sure you are getting 12 volts to the switch, and then 12 volts to the lock solenoid.
Please let me know what you find.

Posted on Feb 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power door locks will not lock except manually


First of all, check ACC fuse in the driver side junction box. The central controller for power door locks is the body ECU. From your description it may be working only partially. Can the doors be locked using a key? If so, this would indicate the actual locking mechanism is OK. Do the front door lock control switches lock the doors?

Oct 25, 2012 | 2002 Toyota 4Runner

1 Answer

1996 Cadillac DeVille. Door open alarm comes on and stays on when no door is open. How do I fix this?


there are tamper switches in this vehicle. trunk lock asm and at all door latches. be sure all power door locks are operating correctly,if not,that not likely is the door to start with. there are also cancel switches in both front doors. if alarm will cancel when using door key in either lock,then they are ok. but sure to inspect trunk tamper switch mounted by /at trunk lock cylinder for "open". is a normally "closed" switch.

Sep 19, 2011 | Cadillac DeVille Cars & Trucks

1 Answer

Tod system on 98 bighorn check light and rear wheels flashing on dash when ingnition on and stays on not pulling front diff out of ingagement vsv are ok and work no power at them but have earth on both so...


check out detent limit switches on gear box and transfer case for continuity and open circuit when pressed(on /off switch) these are feed back signals to indicate it has locked into 4x4 or 2x4, if one of these dont work properly system locks up and wont do anything any more. also check front one on diff near actuator, common problem. check actuator is working properly when vacuum applied and removed. can remove this and bench test unit,some oil will be lost when removed for bench test and you can check colar inside diff slides back and forth to lock axle.

Aug 30, 2011 | Isuzu Trooper Cars & Trucks

1 Answer

Although I lock my doors, the unlock by themselves after a short (approximately 40 second) time. The alarm stays on however.


Sounds like the central locking system thinks a door is open, check the bonnet and tailgate switches are indeed closing (and sunroof if fitted) make sure the boot light is not staying on. Try locking it from the passenger side door lock key cylinder instead of the drivers side or the remote and see if it is ok then

Nov 05, 2010 | 2005 Toyota Matrix

1 Answer

Problem with power door lock and warning light.


It may be as simple as a failed door switch. It would appear one of the switches has failed "open" keeping the light on and not allowing the locks to lock. Check each switch to see if you can find an issue with one, perhaps the plastic plunger broke and when the door closes it will not open the switch.

Please let me know if this assisted or if you need additional help.

Thank you,
Tom

Jun 07, 2010 | 2000 Mitsubishi Galant

1 Answer

Rear door lock won't lock or unlock on 2006 chevy colorado


could be door acuator switch. remove rear door cover follow rear door lock rod it will lead you to the lock motor check power plug make sure its its cliped in some times they come loose.next if plug is tight get a test lite chech see if you have power to lock motor have a friend move master switch up and down while youcheck for power mostlikely the switch is no good.

Apr 10, 2010 | 2006 Chevrolet Colorado

2 Answers

1998 Ford Explorer Door Lock


Hey guys , i got one that i think i know whats wrong but i want to check with others to see, ok so here it is my lock switch on the drivers side only unlocks the doors it does not lock but all the other lock switches in the car fully work so im thinkin maybe its the driver side door lock switch.


This is a common problem with this model. If you access the wires in the boot between the door you will find a broken wire about an inch from the connector. Hope this helps!!

Oct 20, 2008 | 1998 Ford Explorer

2 Answers

Power door locks will not lock


check master door switch/grounds and out put power= if all ok then look at GEM module.

Jun 17, 2008 | 2005 Ford F-150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...