Question about 1990 Honda Accord

1 Answer

Is there a special tool needed to take off the crank shaft pulley on a 1990 honda accord

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 279 Answers

If your having issues removing the crank pulley bolt you can get a special tool from snap on tools.It slides inside the pulley and holds it in place so you can break the bolt loose.Once the bolt is removed the pulley will slide off.

Posted on Feb 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace Crank Seal , Honda Accord 95, F22B2 engine


this is covered in the FSM. 95 accord.
did you google this?
http://www.honda-acura.net/forums/accord/137349-1993-f22-crank-cam-balance-shaft-seal-hell.html

are you sure its only the crank seal,????
gravity lies. as does windage effects.
is this an A/T or M/T car, the latter makes the bolt come off easy
(5th gear + brakes) the slush pump tranny NOT.
so if you read the FSM it states." it shows photo of tire off and pulley bolt view and how the body ends just above that bolt, (see it?)
  1. Disconnect the negative battery cable.
  2. Remove the accessory drive belts.
  3. If necessary, secure the crankshaft with a flywheel holding tool.
For some engines, a special pulley holder tool is available to secure the pulley while removing and installing the bolt (refer to the illustration)."
4 Remove the crankshaft pulley bolt. This bolt can be difficult to remove. Spray the bolt with penetrating oil and allow it to soak overnight. Book forgets to see CCW direction on bolt (RHT)
the bolt will take about 200fl/lbs of reverse torque to get off.
5 Carefully remove the pulley from the crankshaft. Do not pry it off.
6:
Remove the key from the crankshaft sprocket. Be sure not to lose it.
7 -If necessary, remove the tool holding the crankshaft.

remove seal with seal puller or screw trick ,etc.
do not damage the seal base collar of the housing. DO NOT.

is this your first engine seal work>?
or done many , just need help with one honda.?
if doing all work on a honda, did you ever consider a real FSM?
why not get one, and read it, and all the steps and warnings.
worst case.
if you work engines, you know as you go , you see
Omg, it not the crank it the cam leaking, or just a bad valve cover.
fate happens, distributor seal leak too.

with all FWD, doing a crank seal can be easy or hard.
no access panels in finder
or on some cars, 7ton pressed on pulley, (Dodge neons/ yuk)

bolt spec:
1994-95 Accord and Prelude-181 ft. lbs. (245 Nm)

if the 90,000 mile timing belt is ignored, you will bend the head valves over, or worse... so...... all this , is a consideration.

Feb 25, 2014 | 1995 Honda Accord

1 Answer

How to take off crankshaft pully


You can get a special crank holding tool at auto zone (loan a tool) remove bolt and gently remove pulley gently do not pry

Oct 22, 2010 | 1992 Honda Accord

1 Answer

How Can I remove the sterring pump from a Lincoln 1990 Town Car?


You are going to need a special tool to remove and install the pulley, you can maybe rent one from you local auto parts store. Once the pulley is off just remove the bolts and disconnect the hoses. The inside of the pump shaft is threaded for the installation tool, make sure you get the tool fully seated before you attempt to install the pulley. The hub of the pulley should be flush with end of the shaft when you are done.

Dec 20, 2009 | 1990 Lincoln Town Car

1 Answer

Can't get the bolt out of the crankshaft pulley is it reversed thearded


No it's right thearded, comes off counterclock, what you need is a Counter holder, this is a tool that looks like a big socket with a big hole in the center, fits over the outer hole (hex) where the crank bolt sits,it holds the harmonic pulley from turning while removing crank shaft bolt.Autozone rent this tool.

Dec 17, 2009 | 1997 Honda Accord

1 Answer

Cant break my crankshaft pully bolt is it left handed threads?1990 honda civic lx


when it comes to hondas. the crank shaft pulley bolts are standard thread, which mean "righty tighty lefty loosy" THEY ARE ON THERE EXTREMELY TIGHT!!!!!. i myself have broken many air guns and breaker bars. your best bet would be to take it to a shop and let them break there tools.

Oct 25, 2009 | 1990 Honda Civic

1 Answer

Crank shaft harmonic balencer bolt


THe Harmonic balanced bolt is loosened by turning it counter clockwise. It is recommended that you get the special tool to hold the harmonic pulley stationary while the bolt is loosened or tightened. However the bolt can be loosened if you use an impact socket and a very strong breaker bar and place it against a strong part of the frame and just bump the engine over very carefully with the high voltage coil wire disconnected so that the engine won't start when you bump it over with the starter and make sure the socket and the breaker bar are very secure when doing this. I recently bought the special Honda wrench from Snap-On tools and it works great for this, but it's very expensive but it's the only way to hold the Harmonic Pulley sufficiently in order to tighten it back to the recommended torque. Which can be several hundred ft pounds, see the service manual for the exact torque.

Aug 23, 2009 | 1992 Honda Accord

2 Answers

I want to change the timeing belt for a 90 honda accord anyone know the time settings


jack up on stands, remove LF wheel and water shield. disconnect battery, buy a crankshaft pulley holding tool from OTC, swing p.s. reservoir out of the way, remove both accesory belts, front motor mount, valve cover, dipstick and tube, crank pulley, timing belt cover, set engine at TDC #1 (align marks), remove nut on tensioner shaft to loosen both belts, remove the belts and tensioners (replace all), replace water pump NOW, install timing pulley, reinstall spring (use dipstick tube bolt to hold back the timing pulley with the slot in the bracket on the pulley until the belt is installed), install balance shaft belt, pulley and spring, once tensioned rotate engine once and retension by loosening the nut and retightening. Make sure the marks are still lined up, and reinstall everything. New valve cover gasket set with silicone in the corners. fill with coolant and bleed system once finished. it is a good idea to also change all the oil seals while you are in there.

Aug 04, 2009 | 1990 Honda Accord

2 Answers

Do i need a special tool to take the harmonic balancer off


not really special, but, you need a harmonic balancer pulley removing tool...Lots of larger parts store either loan them out or rent them. (if you buy one you may get to use it again in five years,unless you are a tech.) Why are you taking it off?

May 27, 2009 | 1992 Honda Accord

1 Answer

''Is the harmonic balancer bolt on a 1990 honda accord reverse threaded or just super tight''


it is just tight , it is best to use a impact wrench to remove if you do not have honda special to tool to hold the crank

Dec 27, 2008 | 1990 Honda Accord

Not finding what you are looking for?
1990 Honda Accord Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...