Question about Chevrolet Silverado 1500

1 Answer

This is my problem, i have a 1996 chevy silverado 4x4 and i need to take the motor mounts off. can someone explain how to do this step by step? thanks

Posted by on

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 576 Answers

This isn't too difficult of a job. You will need to do one side at a time. If one side is broken, start with that one. Take the bolt that goes through the mount from front to back. Break the two bolts that hold the mount to the engine block loose. Put a jack under the oil pan with a piece of wood on top to prevent damaging the oil pan. Jack the engine up just enough for the motor mount to clear the lower bracket. Remove the two bolts that hold the mount to the engine. Remove the mount and place the new one in place, making sure to keep your hands in a safe place just in case the jack would slip. Start the bolts that hold the mount to the engine block. Lower the engine a little and put the through bolt back in. Lower the engine completely and tighten all bolts. Let me know if you have any more problems with this. Good luck.

Posted on Feb 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

After running my 2000 chevy silverado 4x4 if it sits for about 30 min it dose not want start with out giveing it gas


It might be your core pack. Try getting that checked at the auto store. Or it could be a gunked up fuel injector.

Feb 27, 2013 | 1999 Chevrolet Silverado 1500

1 Answer

Will engine and trans form a 1996 chevy 4x4 pu fit into a 1991 chevy 4x4 pu


WELL YES YOU CAN PUT THEM ON BUT NEED TO REPLACE THEM WITH WIREING HARNESS AND COMPUTERS AND EXUST SISTEM THATS THE ONLY WAY THEN YOU WILL HAVE PROBLEM GETING IT TO SMOG UNLESS YOU TAKE TO STATE SMOG REFERY

Nov 28, 2012 | 1991 Chevrolet Silverado 2500

1 Answer

Will a 4L60E out of a 93 chevy silverado heavy half 4x4 work in a 96 chevy 1500 suburban 4x4?


there are a few differences in 96 there is a range indicator switch which also works as a neutral safety switch mounted on the selector shaft. if the 93 tranny is original it wont have the bosses to mount that switch.

Jun 05, 2011 | 1991 Chevrolet C1500

1 Answer

Can you explain to my step by step how to replace a blower motor resistor for a 2000 chevy silverado?


If it needs a resistor, plan on replacing the blower motor also. The motor is drawing high amps and killed the resistor. Its a simple job, all is above the passengers feet. just a few screws.

Aug 30, 2010 | Chevrolet Silverado 1500 Cars & Trucks

2 Answers

2004 chevy silverado 1500 4 wheel drive wont work..


try selecting from nutreul or less then 3km

Feb 02, 2010 | 2003 GMC Sierra

1 Answer

I need to put brakes in my 1995 Chevy picku 4x4. I need a manual and cant afford 40 bucks for it. How can I get directions to remove and install new brakes on all 4 wheels?


er,
Go to the "Reference section" of your public library and locate either the Chilton's or the Motor's manual fro your pickup. Don't need a library card. Photocopy the pages you need using the public copy machines there. The manuals have complete step-by-step instructions with illustrations.

Oct 15, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

1996 chevy 4x4 5.7 that leaks in rearend oil all over under side


The last time that this Happened on my 95' Silverado, I had a Crack in the Housing. You might check it out. Clean the Rearend Very well and you should see Exactly where it is Coming From Let me Know! Please Rate my Response, I need all the Help That I can Get! Thanks!

Jan 27, 2009 | 1996 Chevrolet K1500

1 Answer

Horn replace


have someone beep horn while you look for it.

Nov 30, 2008 | 2007 Chevrolet Silverado 2500HD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...