Question about 1994 Ford Ranger Supercab

1 Answer

1994 ranger 2.3L 5spd, w a/c. replaced fuel

1994 ranger 2.3L 5spd, w a/c. replaced fuel filter, spark plugs and wires, DPFE. fuel pump whinning, cel on then goes off when cranking. power to relays, coil parks, sparked checked on one cylinder. Inertia switched not tripped. Cranks but will NOT start. Used starter fluid, wont start. Shrader valve has fuel squiting out hard. EVERY fuse is okay. Combustion preesure blows finger off plug hole. How do I check timing belt without taking all apart? Inspection plate?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 617 Answers

Only way to check the timing belt is to remove cover, When was last time belt was replaced, timing belt should be replaced every 50,000 miles, shound like that would be next thing to check

Posted on Feb 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 90 ford ranger 2.9l. It seems to be


check fuel pressure on fuel pump might be getting weak

Oct 05, 2014 | Cars & Trucks

1 Answer

1994 Ford Ranger Super Cab MAF problems


Looks like you need to replace the coolant temperature sensor for the computer. This will make the engine run rich all the time. You can simply check it with a scan tool with live data capability. With the engine warm read the engine coolant temperature. My guess is it will read very cold even with the engine warm. If so replace it and the truck will be running like new

Jul 19, 2014 | 1994 Ford Ranger Supercab

2 Answers

1994 ranger problems


AHHH did you check the fuel filter, 80% of faulty fuel pumps that I have worked on have only been the filter

Jan 06, 2014 | Cars & Trucks

1 Answer

Why does my 86 2.9 l. ranger kill spark plugs


your truck is running too rich with fuel if you have a carburator have it check

Sep 18, 2012 | Cars & Trucks

1 Answer

Hesitation on take off and a miss while goin down the road in my 1994 2.3l ford ranger


Start with a complete tune-up

Plug wires can cause this.

Do spark plugs, spark plug wires, distributor cap, rotor cap, spark plug wires, fuel filter, air filter, oil & oil filter.

People often neglect these simple things which could save your motor, maintain it's efficiency plus improve gas mileage.

Feb 20, 2011 | 1994 Ford Ranger Supercab

1 Answer

TWO DAYS AGO 94 RANGER (4 CYL) SOHC...STOPPED ON ROAD. CRANKS BUT DOES NOT START. HAS FUEL PRESSURE. CHANGED FUEL FILTER. CHANGED AIR FILTER. CHANGED ONE OF THE DISTRIBUTOR COILS...TWO SPARK WIRES WERE NOT...


If all the coils are giving spark now,then you moat likely have gas fouled plugs now,so change them out with new ones,all 8 of them.If you do not have spark on all plug wires,pull the timing belt cover,and align the cam shaft and the cam,to see if the belt has jumped.If It hasn`t,replace the crankshaft sensor.

Oct 17, 2009 | 1994 Ford Ranger Supercab

2 Answers

94 New Yorker, replaces fuel pump and fuel filter and....


It's either not getting fuel or spark. Have you checked to see if you are getting any spark to the plugs. Take one of the plug wires off its plug and place it close to the frame or engine. When you crank the engine you should be able to see a spark jump from the plug wire to the frame. if you do not see a spark you have a problem with the ignition system. If you do see a spark then the problem is with the fuel system.

Hope this helps Good luck Loringh

Nov 01, 2008 | 1994 Chrysler New Yorker

1 Answer

Engine cuts out on acceleration


could be the pump or injectors or both. while your at it check your fuel tank for rust dirt any thing.

good luck

Jason

Oct 01, 2008 | 2003 Ford Ranger Regular Cab

Not finding what you are looking for?
1994 Ford Ranger Supercab Logo

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...