Question about 2000 Ford Expedition

2 Answers

My expedtion dosen't have any heat it's just blowing out cold air and the machanic said i need some kind of motor that's in my dash what kind of motor i that

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Good day, you may need to replace the heater core, maybe thats what he's trying to tell. hope this helps, have a nice day

Posted on Feb 07, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 369 Answers

I think you should replace your thermostat first.If your blower is working.It wouldnt hurt to flush your cooling system too.It is alot cheaper to do that first.

Posted on Feb 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When air conditioner is turned on the drivers side blows cold air and passengers side blows hot air, rear dual air blows cold air in to back passengers area.


If your sure you're looking at the right motor, Then the door is broke. Dash and plenum have to come out to fix it. Not a cheap fix.

Jul 02, 2016 | 2010 Ford Flex Limited

1 Answer

I have a 2005Chrysler minivan front heat does not blow back heat blows cold cold air front doesn't blow at all what could this be


If the front heater does not blow any air suspect a defective fan motor or resistor. You can try turning the blower on and banging the underside of the passenger dash to see if it begins working again. If it does, suspect a bad fan motor. If blowing only cold air, the most common problem is a low coolant level

Jan 05, 2016 | Cars & Trucks

1 Answer

No heat / heater not working


not blowing air or when switch is on blows cold air when you have climate control knob turned over to heat? it could be a switch or blower motor or fuse if its not blowing any air. if its blows cold air when knob is on heat then is can be thermostat or low on coolant or it could be climate control module or it could be a air filter in dash.

Apr 05, 2013 | 1993 Mazda Protege

1 Answer

1992 Dodge Dakota 2wd 3.9L V6 Air conditioning/Heater dosent blow? when i turn the air or the heat on i can hear the compressor kick on but it dosen't blow cold or hot? any help would be appreciated


Roger it sounds like the blower motor is not comming on. There is a resistor network located in the engine compartment on the passenger side mounted to the firewall, that controlls the blower motor. The connections may have corroted or the unit itself is bad. That was the first thing I had to relpace when I got my used 92 Dakota. There is also a 30 amp fuse in the fuse box under the dash board . If that is blown I would suspect the blower motor is seized up or just pulling too much power.

Nov 29, 2011 | 1992 Dodge Dakota

1 Answer

Air conditioning works great but will sometimes get to putting out warm air. What causes this?


I have had this problem before, In my case i took it to my local machanic and we discovered i had high imput causeing the ac compressor to over charge. and the freon that makes teh cold air, needs to be heated really hight to make the reverse affect of cold air. In return over heating and shutting down blowing hott air for it to cool off. I needed to replace the part that the electrical wire clips into.

Jul 12, 2010 | 2001 Suzuki Vitara

1 Answer

Loud clicking noise from dash whenever heat


I have and 2002 with rear air and had the same noise and problem in the back. There is motor in the back that moves a flapper door open and closed to blend the hot and cold. The motor has plastic gears in it and they strip out making a clicking noise when the motor cannot hit the point that the heat control dial is being set too. Probably the same set under the front dash. You will more than likely need to by a new motor assy.

Mar 27, 2010 | 2003 Ford Explorer

1 Answer

No heat in a 2001 ford expedtion system blows but its all cold, heater core lines r hot into core and return


their is a blend door inside your air box were the heater core and the evaporator is for your heat and your ac the blend door is not moving either your vacuum control for the blend door is not opening or it could be the type with a electric motor and it is not working

Feb 17, 2010 | 2001 Ford Expedition

1 Answer

My 2003 jeep heat blows cold air?


Hi your problem lies with the flaps in the dash that control your hot or cold air flow, you need to remove the dash and renew those flaps

Nov 02, 2009 | 2003 Jeep Grand Cherokee

1 Answer

AC/Heater control problem


In the dash there is a part called the blend door and blend door motor. This allows you to have warm air, and not just cold AC or hot heated air. This motor goes out and whatever position it "dies" in is what kind of air you get. The part is relatitively cheap but the labor cost is huge, because the dash needs to be removed for access.

May 05, 2009 | 1995 Lincoln Town Car

1 Answer

Heating...burrrrrrrrr


The clicking is the air temperature blend door motor, most likely the motor will have to be replaced the blend door checked to make sure it moves freely, this repair requires the removal of the dash assembly.

Dec 07, 2008 | 2002 Ford Explorer

Not finding what you are looking for?
2000 Ford Expedition Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...