Question about 2000 Ford Expedition

1 Answer

What has to be taken off to change all 8 coils on 2000 ford expedition

Posted by on

  • lindsay836
    lindsay836 May 11, 2010

    I believe you are refering to the ignition coils ?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 451 Answers

Actually nothing. what ford has are called "cips" coil in plug. i just changed my spark plugs out. the spark plug is covered by the "cip". the back 2 near the firewall on both side are a royal pain. forgot to say that each cip is held into place by one bolt (i think its a 10mm bolt). this job will take about 4-6 hours. a faster technique is to unbolt fuel rail and gently pry up the injectors this willl give you more work space. i am willing to bet your plugs are bad and not the "cips". if you are going to change the cip then do the plugs also. the cips run for about 60 to 80 bucks a pop.

Posted on Feb 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change ignition coil on 2004 ford expedition?


There should actually be 8 separate coils atop of each spark plug.

Jul 26, 2014 | 2004 Ford Expedition

1 Answer

Why am I getting code # P 0308


I have your vehicle as a 97 Ford Expedition...Is this correct? Reason I ask is that Ford uses Coil-On-Plug and you said "I changed the wires"...Which would mean all eight coils were changed...P0308 is telling you the ECM is seeing a fault on cylinder #8...I would strongly suspect a bad coil for that cylinder...Question; Did you change all eight coils? If not change #8...saailer

May 30, 2014 | 1997 Ford Expedition

1 Answer

Looking for torg specs on tire lug nuts on a 15passenger van f350


Hello there
FORD TRUCK
Wheel Nut Torque Specifications
Make/Model Description Years Torque Make/Model Description Years Torque
FORD (continued)
FORD TRUCK
E250 Van 8 Lug, 9/16" 2008-88 140 -160 ft lbs
E350 Van 8 Lug, 9/16" 2008-88 140 -160 ft lbs
Escape - 2003-01 98
Excursion - 2003-01 160
Excursion - 2000 148
Expedition - 2003-01 150
Expedition 19mm Hex 2000 100
Expedition 21mm Hex 2000 150
Expedition - 1999-97 100
F Super Duty Pickup 10 Lug, 9/16" 2003-99 165
F Super Duty Pickup 10 Lug, 9/16" 1998-96 140
F150 Pickup - 2003-01 150
F150 Pickup 19mm Hex 2000 100
F150 Pickup 21mm Hex 2000 150
F150 Pickup - 1999-88 100
F250, F350 Pickup 8 Lug, 9/16" 2003-01 160
F250, F350 Pickup 8 Lug, 9/16" 2000-99 148
F250, F350 Pickup 8 Lug, 9/16" 1998-88 140
Ranger, Windstar - 2003-87 100

Feb 01, 2011 | 2008 Ford F-350

1 Answer

308 code i change sparks ignition coil same problem


Code P0308 - Cylinder 8 Misfire Detected

Possible Causes:
- Improper spark plug at cylinder #8
- Insufficient compression at cylinder #8
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #8
- Fuel injector #8 may be faulty

Possible Solutions:
- Perform Injector Service
- Replaced Spark Plug #8
- Replaced Injector #8
- Replaced Ignition Coil #8

Jan 14, 2011 | 2000 Ford Expedition

1 Answer

Recently had all plugs and EGR Valve changed.


firewall

4 - 8

3 - 7

2 - 6

1 - 5

front

The spark plug firing order is 1 - 3 - 7 - 2 - 6 - 5 - 4 - 8 Make sure the coil is good.

Jul 21, 2010 | 2000 Ford Expedition

1 Answer

Diagram of spark plug


Check this for 4.6 or 5.4 sizes engine...

2004 Ford Expedition 4.6 liter V-8 VIN "W"

f4f4c2b.gif


2004 Ford Expedition 5.4 liter SOHC V-8 VIN "L"

a5901ea.gif

Hope this help (remember comment and rated this).

May 05, 2010 | 2004 Ford Expedition

2 Answers

HOW TO CHANGE COIL PACK ON 2000 FORD EXPEDITION EB 5.4 ENGINE?


Ther is no coil "PACK" on your engine. Each plug has its own coil. Each one is held in place by a single 8mm head bolt that screws into the intake plenum. To change them you simply disconnect the electrical connector, remove the bolt and pull the coil and spark plug boot up out of the spark plug tube. (Reverse proceedure to install.)

Nov 19, 2009 | 2000 Ford Expedition

1 Answer

2000 Ford Expedition EB runs rough and begins to shake and stall


I personally would start with the one that runs cylinder #3 and then take it from there.

Mar 09, 2009 | 2000 Ford Expedition

Not finding what you are looking for?
2000 Ford Expedition Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...