Question about 1997 GMC Jimmy

1 Answer

Wont start--pulled starter bench tested ok

1997 GMC Jimmy wont start--pulled starter bench tested ok battery tested good

Posted by on

  • Anonymous Mar 26, 2014

    cycloid by starter, truck wont start

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • GMC Master
  • 752 Answers

Check your ignition did one of these before changed 3 starters before finding out it was ignition switch not making connection in switch good luck

Posted on Feb 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Arctic cat 2000 300 4wd starter would not engage. I pulled starter tested on bench engages ok. where starter mounts in hole feels like gear in there turns free what does starter engage into help


did you test the battery on the cat low battery will cause engagement problems ---starter damaged or weak my be good under bench test with out a load --or miss aligned and wasnt meshing with flywheel

Nov 10, 2016 | Cars & Trucks

2 Answers

2001gmc jimmy wont start


Sounds like dirty corroded battery post connections...remove from battery clean and/or replace the post push in terminals...these can be purchased through your local parts store for under $5. They are push out...push new in also clean inside the battery connections...be sure new posts are tight...all systems will need to reset after the dis-connect...Hope this helps.

Jan 20, 2014 | 2001 GMC Jimmy

1 Answer

2001 Gmc Jimmy 4x4 4.3l v6 I was on my way home


If you put a socket on the crank pulley bolt can you turn the engine over with a ratchet?

Sep 14, 2013 | 2001 GMC Jimmy

1 Answer

My 1998 gmc jimmy was having power drains i had the alternator replaced still wont start again just clicks was starting after now its not could it be the starter


do the lights go out when trying the starter? check the battery and connections get the battery tested, see if its good.. repost findings..

Jan 21, 2013 | 1998 GMC Jimmy

2 Answers

Willnot start pulled starter bench tested ok


Check all cables to the starter and the ground or negative cable from the battery to the engine or frame. They get old and break down between the insulation and you wont get enough current to start the car

Feb 07, 2010 | 1997 GMC Jimmy

2 Answers

Starter problem- How do I check to see if the starter needs replaced?


check to see if your getting power from the battery to the starter and check the ignition signal wire while some one turns the key if your getting power there and the starter don't engage then the starter needs to be replaced also while someone trys to start it tap on the starter and see if you get a response but if your getting power to it and it don't work it's bad

Oct 19, 2009 | 2000 GMC Jimmy

1 Answer

Turn key wont start,new battery,good fuses,bench test starter ok?


Have you tried shifting into neutral to start? If yes then perhaps the key switch is bad. One other thing to check would be the starter relay.

Apr 25, 2009 | 1989 Chevrolet C1500

1 Answer

Jimmy 1997


check the starter wires. it sounds like they are loose

Jan 27, 2009 | 1997 GMC Jimmy

Not finding what you are looking for?
1997 GMC Jimmy Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...