Question about 1997 GMC Jimmy

2 Answers

Willnot start pulled starter bench tested ok

Willnot start pulled starter bench tested ok battery good

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 5,370 Answers

Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks

Posted on Feb 22, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 80 Answers

Check all cables to the starter and the ground or negative cable from the battery to the engine or frame. They get old and break down between the insulation and you wont get enough current to start the car

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 g35 coupe no start just clicks once. Every thing else is working but wont crank over...help


have the battery load tested , check condition of terminals and battery posts

Apr 24, 2017 | Cars & Trucks

1 Answer

Arctic cat 2000 300 4wd starter would not engage. I pulled starter tested on bench engages ok. where starter mounts in hole feels like gear in there turns free what does starter engage into help


did you test the battery on the cat low battery will cause engagement problems ---starter damaged or weak my be good under bench test with out a load --or miss aligned and wasnt meshing with flywheel

Nov 10, 2016 | Cars & Trucks

1 Answer

2004 Ford Taurus real sluggish at times when starting


have a load test done on the battery to check for dead cell, have the alternator out put checked by an accredited auto electrician. If the battery is good and the alternator is ok then look at the starter. Pull it and have it bench tested before you waste money on a new one.

Aug 10, 2014 | 2004 Ford Taurus

1 Answer

2000 Toyota Land Cruiser having on and off trouble starting, Similar to previous post. Had batery, alternator and starter tested on the vehicle and was told the starter was bad so I pulled the starter but...


Starter problems are very common on these V-8 engines, even though it may test good on the bench it doersn't mean it's going to work in the engine everytime since the becch test doesn't have the load of turning the engine, I would not trust this starter in this case because of all the work involved in removing it again.

Oct 05, 2011 | 2000 Toyota Land Cruiser

2 Answers

The battery is full , its clicking like a dead batt or like the contacts in the starer are gone so changed the starter with a bench tested starter & still the same problem ....? so checked all fuses...


If battery is new or like new and fully charged, and it still clicks, then the contacts to the battery may be corroded to the point that a 'limited' amount of current flows through the contacts to the starter.

When the starter is removed and bench tested, it will test out ok, so there must be something else wrong with the starting/charging system other than the starter or the battery itself. Something in between the two items is causing your problem.

Good luck on this repair.

Jan 08, 2011 | Dodge B Series Cargo Cars & Trucks

1 Answer

Put new starter on car just clicks willnot start


bench test the starter make sure it's good,also check battery.











TIM.........

Oct 24, 2010 | Cadillac CTS Cars & Trucks

2 Answers

1998ford f150 starter won't crank or turn over.full charged battery.starter ingages when crossing small hot bolt with upper larger bolt.clicks with ignition.


First make sure you can turn engine over with a socket and that it is not seized. Second if engine checks out fine does the starter just click with the ignition key? If it does perform what is called a voltage drop test on the starter cables. Connect a volt meter on each end of the cable you are testing you should read no more that a half a volt drop when loading the circuit. If cables check out fine pull the starter and have it bench tested at an auto parts store. But be carefull bench testing can show a starter is ok with out putting a load on it, if it still shows good on the bench you still may need to replace it. If you don't get a click with the key check for 12 volts at the starter connector unplugged, if no trace starter wire noting color code back through the starter safety switch back to the ignition switch.

Oct 14, 2010 | 1998 Ford F150 Regular Cab

1 Answer

Wont start--pulled starter bench tested ok


check your ignition did one of these before changed 3 starters before finding out it was ignition switch not making connection in switch good luck

Feb 07, 2010 | 1997 GMC Jimmy

1 Answer

Turn key wont start,new battery,good fuses,bench test starter ok?


Have you tried shifting into neutral to start? If yes then perhaps the key switch is bad. One other thing to check would be the starter relay.

Apr 25, 2009 | 1989 Chevrolet C1500

Not finding what you are looking for?
1997 GMC Jimmy Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...