Question about 2006 Toyota Sienna

1 Answer

Changing the rear disk brakes on a 06 toyota sienna, what is the process?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 80 Answers

-Set up jack and properly block front tires.

-Do not set parking break as this may hender removing the rear calipers. Open hood and remove the brake resevoir cap.

-Remove hubcaps if applicable,

-Loosen Lugnuts but do not remove,

-Jack up van,

-Remove tire.

-Caliper should be visible. There are two bolts or hex heads on the back side that can be a pain to remove sometimes.

-Pull the caliper off the rotor, It is recomended to have the rotors turned or replaced. With the old pad still in place, take a c clamp or brake caliper squeezer and compress the caliper

-remove old pad, take note for the reinstall of the new pad.

-reverse the steps. This is a simple break down. Hope it helps

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The rear bumper cover came off how can I reinstall it


2000 Toyota Sienna rear Bumper cover replacement (1998 ...

? 3:40
https://www.youtube.com/watch?v=AY1BBdg3q74
Sep 20, 2013 - Uploaded by SergSpace
2000 Toyota Sienna rear Bumper cover replacement (1998-2003) .... Automotive Bumper Repair Specialist- How to repairyour plastic bumper cover ... Toyota Sienna Rear Shock Installation 2003, 2004, 2005, 2006 - Duration: ... 2015 Toyota Sienna XLE - Duration: 28:13. by MikesCarInfo 35,234 views.

Fixing My Mom's Prius: Loose Rear Bumper Cover - YouTube




Nov 29, 2015 | 2005 Toyota Sienna LE

1 Answer

How do I fix a squeak in rear of 2006 toyota sienna?


have the springs checked and the shock absorbers too. not likely t be much else. Sorry, also, might be the brakes need to be checked

Jun 05, 2015 | 2006 Toyota Sienna

2 Answers

Brake esemble diagram


Hey Stan the man,need your vehicles info.,year,make,model and engine size and Tommy on the spot here will send you a picture diagram of your rear brake assembly.There's a special spring tool you can get at auto parts store to remove and install springs,me got one.

Oct 15, 2012 | Cars & Trucks

1 Answer

I drive a 2004 Toyota Sienna LE. Recently I changed a burnt out brake light bulb. I also changed a burnt fuse once my turn signals went spastic. After changing the burnt fuse, my signals now work fine. Now...


you have fitted a single pole bulb into a two pole socket ,have a good look at the end of the bulb and the look inside socket and you will see what i mean

Mar 15, 2011 | 2004 Toyota Sienna

1 Answer

How difficult is it to change out the left rear wheel bearing and the speed sensor on a 2000 toyota sienna?


Front wheel drive. Changing the rear bearings is easy. The speed sensor should be easy as it can be located on the transmission and changed from the outside in most cases. For both jobs I recommend the Haynes repair manual on your vehicle.

Aug 08, 2010 | 2000 Toyota Sienna

2 Answers

Toyota 2001 Sienna brake problem when i press the brake pedal the brakes aren't as strong as the used to be. Even with new brake pads. I have to pump the brake pedal to make them have more power. What...


Check your brake fluid level. if ok, have the system bled as there may be air in the brake system. If your fluid is low, have the brake system checked for leaks. Hopefully this helps!!

Apr 02, 2010 | 2001 Toyota Sienna

1 Answer

2005 Toyota Sienna rear brake light problem. The rear center brake light works. The rear left and right brake lights do not. Fuses are fine. Checked bulbs and they look fine and have continuity. If not...


have you checked the earthing continuity-if it's this other bulbs may also partly light when brakes used
otherwise-
Check continuity of live from center to lh & rh lights and/or is there a live at those lights

May 03, 2009 | 2004 Toyota Sienna

1 Answer

Where is located the fuse or fuses from rear and break lights ,please. toyota sienna 98. is without rear and break lights


Remove push-on plastic nut beside parking brake. Detach side kick panel. Remove lower dash panel. Three screws, two bolts. The fuse diagram is on the back of the panel. That's for a 2000. Think it has the same body style.

Feb 18, 2009 | 2000 Toyota Sienna

1 Answer

Brake rotors


Are there small retainer clips on the studs still? More than likely its just rust built up on the center hub. Take some sand paper to the center hub, as long as e-brake is released and caliper is off, it will come off. I'm not familar with the toyota sienna's but if they have internal drum e-brakes, I would back off the adjuster if they do.

Oct 05, 2008 | 2006 Toyota Sienna

Not finding what you are looking for?
2006 Toyota Sienna Logo

719 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...