Question about 2003 Ford Crown Victoria

1 Answer

Check engine light on, code is missfire in cylinder 3, car runs bad changed coil

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 369 Answers

Change your spark plugs first.if that doesnt help then replace your wires.after that it is pointing to an injector.hope this helps.

Posted on Feb 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

03jeep lbertyrandom missfire cyl 2 4 6check engine light flashing


Check Engine Light/Misfire Due to Intake Valve Locks ...

repairpal.com > Problems > Jeep > Liberty
Jeep Liberty Check Engine Light/Misfire Due to Intake Valve Locks/Valves. ...Misfire cyc 4 and random cyc misfires, changed coil packs and plugs... sounds as if rod ... Light came on again (misfire on cylinder 4) - switched coil from 4 to 2. Light ...

Jeep Liberty Questions - Cylinder Misfire code - CarGurus

www.cargurus.com > Questions > Jeep > Liberty

CarGurusMay 27, 2009 - #4 misfire new plugs and coil pack on #4 light came back on after 300 miles if ... How come it stopped misfiring for 2-3 months, and now is back? ... I have a 2005 Jeep Liberty 6 cylinder, engine light came on scaned the codes ...

Liberty Cylinder Misfire / Computer issue? - JeepForum.com


Nov 28, 2015 | Cars & Trucks

1 Answer

How can i fix the missfire on a cylinder toyota corolla 2000 1.8ltr


First you need to retrieve codes from the Engine control module. You can buy a cheap code retriever at harbor freight and get the codes. After you get the codes, if it is P0301 it means cyl #1, P0302 = cyl #2, P0303=cyl 3 and P0304= cyl 4. For ex: if you got P0301 you should remove the ignition coil #1(near the front of the engine, where the pulley is) and change its position with the coil # 2. Also remove the spark plug #1 and change the position with the spark plug #4. Clear the codes and start and run the engine until the check engine light goes on. Check for codes and see if the code change for a different code. If it change the position observe which one is the change. If is P0304 you have a bad spark plug, If it is P0302 you have a bad coil. If it repeat P0301, you have either a low compression, bad injector/connector, bad intake gasket them you should continue your diagnostic. I hope this help you.
Junior.

Dec 17, 2012 | 2006 Toyota Corolla

1 Answer

Mazda 2002 MPV cylinder 3 missfire


was the any oil on the coil boot? you can have a weak injector or a stuck vavle

Oct 31, 2012 | 2002 Mazda MPV

2 Answers

Firing order for a 1.9L saturn sl-1


The firing order is 4 1 2 3 it's from left to right looking at the ignition coil

Aug 31, 2012 | Saturn SL1 Cars & Trucks

2 Answers

Number three coil pack keep burning up


is there oil leaking into that plug area?

Jun 15, 2012 | Cars & Trucks

1 Answer

I have a 2002 Nissan Altima 3.5 SE About a week ago the check engine light came on, it started running rough, especially at idle. Computer diagnostic results showed missfire in cylinder 6. I replaced...


i would definately replace the coil. pretty certain that will solve your problem. do not drive with misfire or that can cause fruther damage such as catalyst failing, which is prety expensive.

Aug 17, 2011 | Nissan Altima Cars & Trucks

1 Answer

My 99 es300 has 240k on it and has been an amazing workhorse for me. it began jerking around today, and felt like an 02 sensor gone bad, it threw codes p0300b p0302 p0303 running real rough and...


cylinder 2&3 misfiring, inspect plugs if ok, mark and swap coil packs for known good ones clear codes, run eng brake torque it rev to cause missfire, repeat until check eng, lite comes on, recheck codes if changed cylinders replace coil packs if not, you have two bad injectors.

Sep 29, 2010 | 1999 Lexus ES 300

1 Answer

2004 Dodge Grand Caravan engine light on, missfire


That is a code for the secondary (spark) circuit on cylinder number 3. It is usually caused by a bad connection between the coil and the plug (take the coil off the plug and check for moisture in the boot). If not, it might be a bad coil...

Sep 17, 2009 | 2004 Dodge Grand Caravan

2 Answers

Check Engine Light is on and the code is P0303


Hello I need a help.
I have 1999 lincoln town car 4.6L V8.They have check engine light on. P 0303 cylinder 3 missfire.
I was changed spark plugs,fuel filter. check compression test 150psi. fuel pressuer 50.
swiching cylinder 1 to 3 fuel injector and coil. but they still have engine code

Feb 27, 2009 | 1999 Lincoln Town Car

Not finding what you are looking for?
2003 Ford Crown Victoria Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...