Question about 1999 Chrysler Sebring

2 Answers

Fan heater just blow in high, not in low speed.How can I fix it?

Vifteovn bare blåse i høy

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 645 Answers

There is a blower resister next to the blower motor that usually goes bad. It should have thre or four wires going to it.Oriellys or places like them should have it in stock.

Posted on Feb 07, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 369 Answers

It is your blower resistor.It is mounted by your blower motor.

Posted on Feb 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I fix heater fan to operate at low and medium speeds. It only works on High.


depending on car some have a fan relay or its your switch itself

Jan 13, 2016 | Cars & Trucks

1 Answer

3 speed fan barely changes speed


You are talking about your blower fan for the air conditioner and heater right? More information will be needed to solve the problem.

When you say it barely changes speeds, does that mean it doesnt speed up, or doesnt slow down? By that I mean, is it "stuck" on low, or high?

Most blower fans run at different speeds through the use of a multi-stage resistor built into the fan switch circuit. Low speed is a high value resistor, medium speed is a low value one, and high speed is the fan running without any resistance.

If your fan is running on high and doesnt seem to want to run on lower speeds, the resistor pack may be failing. If the fan is running on low speed only, it may be that the fan itself is beginning to fail, or that the lubricant in it has gotten gummy.

Dec 07, 2015 | Cars & Trucks

1 Answer

In cold temp,heater motor do not run


you mean low heat. at all ducts with full fan speed and blows hard,
here is the correct order.
1: engine at 180F or more holding, a absolute must.
2: fan runs at full speed on HIGH, (sounds like it)
3: fan actual blows (felt) at full speed, to any vent, try all vents.
4: now heat, will happen, if not, the dampers are closed or wrong.
damper can be complex on newer cars,they have motor controlled damper servos';

is this just blower fan dead? problem. on high, if yes say so.

Jan 26, 2014 | 2008 Suzuki Grand Vitara

2 Answers

A t600 kenworth 2000 model the blower motor only blows on high is it the resister


Yes - you diagnosed the problem yourself. The classic symptom of a heater that only blows on the "High" setting is a burned out/damaged or otherwise inoperative blower resistor.
Replacing the resistor should return the two missing blower fan speeds.

Dec 05, 2011 | Cars & Trucks

2 Answers

The cooling fan on my 2001 ford escort SE will not work normally


Check the coolant temperature with the car stopped. At idle with the hood up keep the thermometer in the coolant. Confirm if the coolant is not overheating but the engine is!!

Run the A/C keeping the thermometer in the coolant and allow the fan to kick on.

If with the A/C on the engine doesn't overheat then it confirms that the low speed on the fan motor is not working. Read the description of the Taurus where the low speed is used for normal operation when temperature is required but the high speed is activated when the A/C is on. The circuit is simple.

In your case the low speed has to be activated for the A/C to go into the high speed. The fact that the high speed is working and low speed is not indicates the low speed of the fan is defective.

Other problems such as the thermostat or plugged cooling system(radiator clogged) could be the root problem!

Hope this helps?
2010-09-05_004249_03_focus_cooling_fan_resistor-3xudhdxidxafwe4mdbsnm14c-4-0.jpg

dual_speed_fan_diagram-3xudhdxidxafwe4mdbsnm14c-4-2.jpg

Jun 24, 2017 | Ford Escort Cars & Trucks

3 Answers

Heater motor only wokks on high


probley the restor that gives the a/c heater fan motor its power for the low/ medeam speds has gone bad and onley letes it run on high speed because it gives the fan motor full battery voltage on high speed. it should be located in the heater box were the fan will blow air across it to cool it when it is in use GEORGE STIRBER DBA AUTO ENGINEERING

Jan 01, 2010 | 2001 Nissan Xterra

2 Answers

Heater blower only blows on low


This could be a few different things:

1.Check the power and ground connections on your blower motor, corrosion can cause high resistance and a slow blower speed.

2. Check your available voltage at the blower motor on the different settings. it should vary with high supplying 12volts, make sure to do this check with the blower motor still plugged in.

3. Connect the blower to a 12v power source and see if it runs at high speed.

If all else fails i would check your resistor pack, i would not suspect this because when it fails you usually just loose all speeds except for high, but it could happen.

Feb 25, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Heater on driver-side blows barely warm air other vents blow cold


the most probabale cause of this would be a disfunctional hear core if you replace your heater your heater will more than likley work the the way it's supposed to

Jan 18, 2009 | 2001 Dodge Grand Caravan

1 Answer

Heater and a/c fan switch


thank you so much u helped me fix my heat it was that white thing under the clove box it had a bad connection...thank u so much we couldn't figure out what was wrong.

Jun 25, 2008 | 1999 Ford Escort

Not finding what you are looking for?
1999 Chrysler Sebring Logo

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...