Question about 2005 Chrysler PT Cruiser

1 Answer

Battery charge Diesel PT Cruiser

Hi
Battery flat as standing for long time, Diesel PT CRUISER
under the bonnet is a jump point which is marked + where do you connect the - when connecting a battery charger

Posted by on

  • frank thomas wilson
    frank thomas wilson May 11, 2010

    check to see if this battery has 11 volts charge in it first. otherwise it is no good to use

  • GLENN GOODALL Jan 28, 2013

    HOW DO I CHANGE THE BATTERY ON A DIESAL PT CRUISER AN WHERE DO I FIND IT

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 2,002 Answers

You can connect the - or negative to the negative on the battery or whereever it will reach on the engine or body. The engine and battery are preferable. Just be sure it makes good contact, bare shiny metal is best, a quick rub with a file or sandpaper before you hook up is a good idea. Watch the guage on the charger as youwiggle the charger cables to see if it moves higher. If it does, clean up your contact points. Hope this helps.

Posted on Feb 07, 2010

Testimonial: "just perfect"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 PT Cruiser, won't start, new battery. No clicking or lights Check ignition and still nothing


Check the main fuse in the fuse block under the hood where the heavy battery positive cable feeds into the fuse block. It should have a high amp fuse ( around 125 to 175 amp ) at the entry point of the heavy gauge battery cable. It may have blown. Has it been jumped or used to jump another vehicles battery ?

Nov 07, 2015 | Cars & Trucks

1 Answer

2007 pt cruiser alarm goes off in cold weather


Batteries voltage fluctuates with temperature. Your battery could be discharging due to the cold to the point where the alarm doesn't see enough power to be on and ready, like in standby mode. I'd recommend getting your battery tested. You may need to charge or replace it.

Feb 20, 2015 | 2007 Chrysler PT Cruiser Touring Hatchback

1 Answer

Where is the fuse for the fan located


I presume that you're talking about the engine fan, right? It is under the bonnet. You have to remove the airbox and it's right there.

This link may help you to find the one...
how to fix p0480 when fans work 03 pt cruiser gt turbo 5 speed

Jul 15, 2014 | 2002 Chrysler PT Cruiser

1 Answer

Timinig mark for 2003 pt cruiser non turbo 2.4


Hi, if it's ignition timing your looking at, it'not adjustable, it's controlled by the ECU, If however it's the cam belt timing, there is a crnk timing mark on the bottom pulley and the cam shafts have markings on theouter rim of the pulleys,these have to line up facing each other in a straight line using the centre bolts as a datum, all 3 marks should be aligned to be correct

Oct 14, 2012 | 2004 Chrysler PT Cruiser

1 Answer

PT Cruiser will not start...goes click, click, click


tap on the starter with a hammer and see if it starts if it does replace you starter

Jul 12, 2012 | 2002 Chrysler PT Cruiser

1 Answer

Pt cruiser 2009 wont stay charged. what is the problem?


Sounds like a bad alternator and or voltage regulator. It's easier just to replace both. You could take to a auto parts house. Many times they have a tester that can tell you exactly what the problem is.

Jun 15, 2012 | 2009 Chrysler PT Cruiser

1 Answer

I went to start my 2005 PT Cruiser and got a loud clicking sound and it won't turn over. Is it the starter?


probably not sounds like either a dead or weak battery or bad connections on the battery posts. first take battery cables loose clean terminals and hook back up hopefully then it will start. or use jumper cables and see if it will jump start. if it jump starts then you no its not starter.if it doesnt jump stsrt then clean posts and cable ends and try again. hope this helps. best of luck

Sep 06, 2011 | 2001 Chrysler PT Cruiser

Not finding what you are looking for?
2005 Chrysler PT Cruiser Logo

1,101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...