Question about 1999 Toyota Land Cruiser

1 Answer

Roof mounted spotlights

I want to wire up a a rear roof mounted spotlight on the tray of my 4x4 and want to wire it up to my 2nd battery how do i do that without going to high beam as normal spotlights are done.
Thanks

Posted by on

  • reges130 Feb 08, 2010

    would you be able to show me on a diagram,i am having trouble understanding,what is the power wire.
    Thanks

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 593 Answers

You can run the power wire into the cab to a universal
toggle switch. Then run a wire from the other side of the switch to the + side of your second battery.
Ground the light at the mounting point. Be sure to use a 20amp circuit breaker toggle switch, or splice in an inline fuse holder with a 20amp fuse, on the +
side. Hope this helps. Good luck.

Posted on Feb 07, 2010

  • John Donahue Feb 08, 2010

    The wire you hook up to your 2nd battery's positive(+ or red)

    terminal, is your power wire. This is also the last wire you connect.

    You have to find the best way to route the wire to the switch(or fuse then to sw.) Now run another wire from the 2nd post on the

    switch to the light. There should be 2 wires coming from the light,

    ground 1 wire to the mounting bolt on the light. Just make sure it's

    a clean metal surface. Now connect the power to the light, and

    connect the power wire to the battery, and let there be light.

    Let me know how you make out. Good luck.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need headlight wiring diagram for 2013 Kia Rio,want to fit spotlights


you will have to fit a relay into the system. Tap a wire into the high beam power wire for the headlights. (Piggy back connection) take this wire down to the fitted relay to a coil pin on the relay. connect a wire to the other coil pin of the relay and return to the dash area to an control switch through it then to an earth point.. Run a wire to an inline fuse directly from the battery ( fuse close to the battery as it is a high current line) down to one pin of the relay. connect up the power wire for the light to the opposite pin on the relay and connect the earth wire of the light to an earth point

According to road regulations you cannot have spot lights on by them selves and they must only operate in conjunction with high beam operation.. The setup as I describe allows you control of when the spotlights will be on ( switch in the dash) and if on will be extinguished when low beam is selected as per regulations. The relay ensures that the trigger wires do not carry full light amperage so light gauge wires can be used and only the power wire from the battery to the relay to the light need to be heavier gauge.

Sep 11, 2014 | 2013 Kia Rio

1 Answer

Relay wiring diagram spotlights


check your wires for a short somewhere

Nov 21, 2013 | Cars & Trucks

1 Answer

Spotlight wiring in landcruiser


I would just tie into the high beam wiring at the factory lights, wire them into a relay and go from there. I wouldn't even consider adding into the high beam system without a relay. You may also want to consider a switch so you can shut them off if you found yourself in a position where you want your factory highbeams but not the extra's. Good luck and have fun :)

Nov 05, 2013 | Cars & Trucks

1 Answer

Wiring spot lights on dodge ram 1500


You've got the wiring confused. Just back over it again as though it was your first time. We all miss things.

Feb 01, 2013 | Dodge Ram 150 Cars & Trucks

1 Answer

Wiring diagram for spotlights on a discovery I/II (1999) Would like to mount and wire the spotlights up so as they come on highbeam only, and would like to connect it into the ' rear fog light ' switch....


You can find factory wiring diagrams here (free RAVE Download) http://www.landroverresource.com/ And sure you can wire your spots into rear fog switch, depending on watts/draw of your lights you might want to "UP" the fuse rating

Mar 20, 2011 | 1999 Land Rover Discovery

1 Answer

I have a 80 series landcruiser done the spotlights but thay keep blowing my head light fuse the wires are 2 times bigger than the ipf kit


The fuse has a lower AMP that is why it is blown every time you switch on the spotlights. In order for the fuse not to be blown, my suggestion is try the direct connection on the spotlights. Connect the spotlight directly to the battery. Just put a switch on it. If you want to use the spotlights, just press the switch.

Jun 26, 2010 | Cars & Trucks

1 Answer

My tahoe has a wire off the battery with a 30amp fuse and a fusable link its has been disconnected what is it. thanks ron


Retro fitted spotlights or fog lights no doubt. Any holes cut out the grill or on the roof?

Vote for me, thanks :)

Jun 25, 2010 | 1996 Chevrolet Tahoe

1 Answer

Wireing spotlights. when there is power at all three wires at the headlights


Go straight off the battery out an inline fuse in and a toggle switch you don't want them on all the time probably not legal most places.

Apr 21, 2010 | 1986 Toyota Pickup 4WD

1 Answer

Coleman Spotlight PML8000 lasts only a few minutes when charged


your battery is gone. chk with coleman for replacement

Dec 13, 2009 | Cars & Trucks

Not finding what you are looking for?
1999 Toyota Land Cruiser Logo

433 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...