Question about 2007 Jeep Compass Limited
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2007 Tahoe tail light
1. Open the liftgate.
2. Remove the two screws from the taillamp assembly.
3. Pull the taillamp assembly rearward until you
disengage the inner pins on the taillamp
assembly from the vehicle.
4. Press the release tab, if bulb socket has one,
and turn the bulb socket counterclockwise to
remove it from the taillamp assembly.
5. Pull the old bulb straight out from the bulb
6. Press a new bulb into the bulb socket and
insert it into the taillamp assembly. Turn the
bulb socket clockwise into the taillamp
assembly until it clicks.
7. Reinstall the taillamp assembly. When
reinstalling, make sure to line up the pins on
the taillamp assembly with the vehicle. If
you do not do this, you will not be able
correctly install the taillamp assembly.
Posted on May 02, 2009
The black engine cover just pops into place. Gently use both hands and place them under the front edge of the cover. Lift up and reach to the right rear corner of the cover and pop it up off the grommet stem. Do the same to the left rear. The plugs are on the REAR of the engine-the injectors on the front. Use the torx driver to remove the plug caps screw and gently twist a little and pull upwards. The plugs is a ways down. Make sue you use a good spark plug socket (the one with the rubber insert) that will grip the plug and not drop it. At a minimum use platinum tipped plugs. I touched the new ones up with some anti-seize lube on the threads and put a dab of die-electic grease in the plug wire tubes.
Posted on Apr 05, 2009
It sounds like the brake switch, that is usually located along the shaft of the brake peddle under the dash, these sometimes are in a bracket for ajustment may not be able to depress switch. Falow starting at peddle go up to dash, you should be able to see it. Hope this helps.
Posted on Sep 08, 2009
You can get access to the light bulbs through the trunk. Go by the bad light and pull the carpet back. You will see the bolts/wingnuts there. Take them out and the light assembly should come out, and you can change the bulb from there.
Posted on Feb 06, 2010
Tips for a great answer:
Feb 04, 2017 | 2013 Jeep Compass
Jan 07, 2017 | Jeep Compass Cars & Trucks
Mar 15, 2013 | 2007 Jeep Liberty Sport
Oct 10, 2011 | 2007 Jeep Compass Limited
Dec 03, 2010 | 2007 Jeep Compass Limited
Apr 09, 2010 | 2008 Jeep Compass
Aug 28, 2009 | 2007 Jeep Grand Cherokee Overland
1,032 people viewed this question
Usually answered in minutes!