Question about 1997 Plymouth Voyager

1 Answer

I have a 97 Plymouth Grand Voager that I bought recently. When I bought it the blew hot almost instantly but you had to turn the fan control to the highest setting for it to come on. After a couple days it started making a humming sound when the heat was on, then it had a delay in coming on. Yesterday when I turned the heat on it made a wierd whirring noise and then nothing. Is it the heater blower motor or what and how do I fix it? Dealer or do it myself?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Plymouth Master
  • 1,757 Answers

This is 100% - definitely the Blower Motor Resistor located near the Blower Motor. It is defined with 3-4 wires going into it. It is easy to remove and replace. Purchase the part at the auto parts store versus at the dealer to save you a lot of money. Purchase it first...this will let you know what your are looking for near the Blower Motor.
YOU can do this yourself.
Disocnnect the Negative Cable off the Battery and wait at least 2-minutes to discharge the Airbag Sensors.
Take the Dash Glove Box completely out to access.
It should be mounted near the fire wall (back) and should have two (2) 8mm bolts/metal screws going into it. Unplug the Resistor, Remove the bolts/metal crews and Remove the Resistor.
Installation is reverse of above.
Let me know if this helped, or if you have any additional information or questions. Feel fre to contact me at!

Posted on Feb 07, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

No tail lights when the headlights are on

Check the fuse for the tails. If it's good, then possibly a shorted out light switch, or a problem in the body control module (BCM).
I replaced a light switch recently, without disconnecting the battery. When done, the headlights were fine, but no tail lights. Turns out I blew the tail light fuse by not disconnecting the battery before starting.
Good luck.

Mar 23, 2012 | 1999 Plymouth Grand Voyager

1 Answer

Hello. My 97 Plymouth Grand Voyager's radiator fans are not running when the temperature is up. The fans do work, and I replaced the relay. Could my sensor not be working even if my gauge is reading in the...

could be bad temp sensor or bad wire connection to fan motor. to check fan; get 2 wires long enough to reach from connector plug of fan to battery., put one on hot and the other on ground and check fan motor. if good, then its either a relay or temp sensor or cut wire somewhere between temp sensor and fan motor. check to see if your getting power from battery to sensor/fan

Apr 02, 2011 | 1997 Plymouth Grand Voyager

1 Answer

My a/c fan will blow but no cool air

I recently had a similiar problem with my Cadillac only blew hot air when I turned on the ac. I disconnected the battery to reset the computer and that worked for me. Unless it is a more serious problem reseting the car might work.

Sep 22, 2010 | 2001 Mercury Grand Marquis

1 Answer

We put a new cv halfshaft axel in our plymouth grand voager when we put it in gear there is a grinding noise what could the problem be or what do we need to do. sure could use some help its a 1996

1. defective shaft if it spins and the van dosnt move. outer joint is ****.
2.if it took you 2 days you shouldnt be doing this. pony up the $90 dollars to pay somebody to do it next time, and save yourself the headache you have now.

May 04, 2009 | 1993 Plymouth Voyager

1 Answer

Cruise control 1998 plymouth grand voyager fuse block diagram

Hello chekon,

Thank you for choosing The fuse box cover should have a diagram on the back of it, which will indicate which fuse represents it's component(s). If you are unsure what any abbreviations stand for or represent, look in your owners manual, or look in a service manual for the 1998 Plymouth Grand Voyager. I also own a 98 Plymouth Grand Voyager (SE) and have a service manual for it, as well as for the 97 Dodge Caravan. My 98 has the 3.0 L engine, and I have done several maintenance requirements to it recently, so if you have any other questions, please let me know and I'll help you out.

Let me know if you need me to locate any fuses or relays for you. In the meantime, I'll do some searching online for some diagrams. Most sites charge for such items, however, if I find something I'll leave a comment with such findings.

Thank you again for choosing


Apr 09, 2009 | 1998 Plymouth Grand Voyager

1 Answer

97 voyager van headlights and dash lights not working

There is a body control module that may cause this issue, it has the ability to be tested, have that done first.

Aug 03, 2008 | 1997 Plymouth Grand Voyager

Not finding what you are looking for?
1997 Plymouth Voyager Logo

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides