Question about 1998 Ford Ranger SuperCab

1 Answer

I am trying to find a part number or a retailer that sells the plastic bezel that surrounds the interior door handle on a 1998 ford ranger -- I think it is called the ''cavity''.

Posted by on

  • frank thomas wilson
    frank thomas wilson May 11, 2010

    bezel you would call it junk yards only will have this item for not much in sales aftermarket parts for these items

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 200 Answers

Dealer or salvage yard. Aftermarket parts not usually made for a item like this. Some companies make Chrome covers as an accent to cover this area.

Posted on Feb 07, 2010

Testimonial: "Thanks. Will give them a try."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do remove the interior panel of the front door?


look for small plastic caps that hide the screws that are usually around the bottom of the armrest and in the plastic area of the interior door handle. you will have to hold the handle in the open position to remove the plastic surround. There will be a red section on the interior door button that is visible when the door is in the unlocked position, you will have to remove that by using a thin blade of some sort as that red bit is the actual clip that holds the button onto the rod.
Once all the screws etc have been removed you have to pry the panel away from the door by going around the perimeter of the door panel.
there will be plastic that seals the door which you will definately have to replace unless you want water to enter the interior of the car from the door.
this info may not be exact but it should give you and idea of what you need to do.

Jul 23, 2014 | 2008 Ford Focus

2 Answers

Interior light and door ajar light on when u pull the keys out still buzzing 1998 ford ranger


try spraying wd-40 in the door latches, sometimes the switches stick and keeps the light on

Mar 15, 2011 | 1998 Ford Ranger SuperCab

1 Answer

Installing driver side interior door handle


pull the inner panel off by first un screwing the two screws located on the handle portion of the panel(they may have plastic hadeaway covers over the heads) then remove the window rolldown handle(if so equipped,manual window)then pull the plastic trangle from the inner of the mirror(this little tri angle keeps the trim down and secure on the door. then pull the palnel directly out there are small clasp pins in behind the panel try not to break these(but they do sell replacements at your local auto store) you will have to get ALL of these free then wiggle the panel up releasing it from the inner shell of the door and and window. you should now have a clean view of the handle. you will now need to droll out the rivit holding the handle to the inner steel of the door. pull the handle forward and it should be released from the inner steel now there clips holding the "rods" to the handles back side, they should have a little piece clipped to the rodto un clip these you need only push them off with your thumb. then replace handle with the new one, and uce a large steel screw to secure the handle when replacing back on door.

Nov 21, 2009 | 1998 GMC Sierra

1 Answer

How to install replacement door handles for 98 ford ranger pickup


remove interior door panel(need special tool to pop plastic clips holding panel to door)with panel off remove plastic film,with window up you should be able to see two 10m nuts-bolts to remove-also have to pop lever off that goes down to door latch

Sep 19, 2009 | 1998 Ford Ranger SuperCab

2 Answers

Lost the only key I had for vehicle


Is the car locked? If not remove the glove box lock or a door lock and take it to a locksmith to make a key for you.

May 27, 2009 | 1998 Ford Ranger SuperCab

3 Answers

Dome light 1998 Ford Ranger super cab


spray both door latches with penetrating oil and open and shut the doors numerous time... should fix the problem

Sep 16, 2008 | 1998 Ford Ranger SuperCab

2 Answers

Toyota ECHO REAR DOOR HANDLE problem


I have this same problem, and I removed the interior door fascia to examine the cause.
As mentioned, the moving, plastic part of the door handle has a recess that houses the return spring. Under stress (under too little stress, if you ask me), part of that plastic that surrounds the spring ruptures (tears), and the spring can no longer exert sufficient force to get the handle to retract flush against the car.
There is no way to fic that plastic part--you have to replace the entire handle. Searching for "Toyota Echo Door Handle" will find you a number of on-line sites that sell BLACK handles for under $7.00! The dealer wants something like $50-$70 for an OEM part, with the right color.
I have the service manual, and replacing these things is a *****! You have to use a TORX bit to remove the actual latch in the door, to get it out of the way.
There isn't actually any fixed linkage between the handle and the interior latch mechanism. When you pull the handle up enough, a plastic cam on the handle strikes a metal lever within the car door, forcing the latch to release the steel hoop. So once you can ACCESS the handle, swapping it out looks straightforward. The problem is, accessing it is a pain. Make sure you have a magnetic grabber handy for the hardware!
I have yet to find a cheap source for SILVER handles on the Internet (none of the Internet Junkyards have responded).

Aug 15, 2008 | 2001 Toyota Echo

1 Answer

Door handle on 1998 Ford Ranger


Remove the door panel and on the inside of the door is a clip or a couple of nuts you'll need to remove. The door handle will fall out.

Jun 14, 2008 | 1998 Ford Ranger SuperCab

2 Answers

1998 chevy truck 1500 door latches


The handle mechanism wears over time. I went on eBay, bought a color matching handle for under $20 and replaced it myself. You have to be careful when removing the plastic panel bezel that surrounds the handle, drill out two rivets and your door will open like new!

Jun 04, 2008 | 1998 Chevrolet K1500

Not finding what you are looking for?
1998 Ford Ranger SuperCab Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...