Question about 1999 Isuzu Trooper

1 Answer

Adjsut compass adjust compass

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 200 Answers

If it's a Donnelly or Gentex try Pressing the compass button until it displays a "C". Do this in a area where you can drive slowly in a circle several times. Like a empty parking lot. That should reset the unit. the owners manual should give you the correct procedure too.

Posted on Feb 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2007 checy impala read "calibration complete" what does that mean ????


CALIBRATION COMPLETE
Refer to Electronic Compass Calibration do you have an owners manual ?
Compass Calibration
The compass direction will show CAL if it needs to be calibrated. Before calibrating the compass, drive the vehicle to an area that is magnetically clean (free of large metallic objects).
  1. Turn ON the ignition.
  2. Before calibrating the compass, make sure the compass is set to the variance zone in which the vehicle is travelling. See Compass Magnetic Variation Adjustment below.
  3. Press the vehicle information button until the PRESS TO CALIBRATE COMPASS screen is displayed.
  4. Press the set/reset button to start the compass calibration.
  5. The DIC will display CALIBRATING: DRIVE IN CIRCLES. Drive the vehicle in circles at less than 8 km/h (5 mph) to complete the calibration. The DIC will display CALIBRATION COMPLETE when the calibration is complete.

Oct 02, 2016 | 2007 Chevrolet Impala

1 Answer

WHERE IS THE REMOTE COMPASS MODULE ON A 2008 JEEP COMMANDER


wow no symptoms stated just the boring where is it...
but great question, names car and year, clearly
we've posted the full fsm online here 100s of times.
here we go again.
down load it, then type , (after opening it)
control F, the type compass.
i wonder if a compass car has compass , omg.
i have 2010 and have same book.
did you scan the PCM yet, i bet not.
and its guess what, telling why it fails right now.
see page 8M-6 in book FSM.
the dtc shows car needs degaussing,, now.... see?
and if that error happens the compass goes blank, RTM?

8m-20
calibration, RTM
replacing first is "overthetop", why go there.
first are scans then tests.
or needs just a degaussing... (a tool)
page 27
"NOTE: In addition to the Universal Transmitter
operation the Electronic Overhead Module (EOM)
is responsible for some of the compass functions.
Anytime the EOM is replaced the compass variance
value must be set, (Refer to 8 - ELECTRICAL/
OVERHEAD CONSOLE/ELECTRONIC VEHICLE
INFO CENTER - STANDARD PROCEDURE - COMPASS
VARIATION ADJUSTMENT)."
not only that the PCM can lose commmications with this OEM.
so not scanning all modern cars, is a road to doom.
why skip scanning the car first and checking fuses.?????

scan first
ask questions 2nd.
my motto.... and WIN

Dec 31, 2015 | 2008 Jeep Commander 5.7

1 Answer

How do i reset the compass on a 2006 dodge grand caravan


Hi Roger, I'm glad to help. Below is the procedure for resetting the compass on your vehicle.



COMPASS VARIATION ADJUSTMENT Compass variance, also known as magnetic declination, is the difference in angle between magnetic north and true geographic north. In some geographic locations, the difference between magnetic and geographic north is great enough to cause the compass to give false readings. If this problem occurs, the compass variance setting may need to be changed.
To set the compass variance:

1. Using the Variance Settings map, find your geographic location and note the zone number Figure 1.
22681.jpg Figure 1 - Variance Settings 2. Turn the ignition switch to the On position. If the compass/thermometer data is not currently being displayed, momentarily depress and release the C/T push button to reach the compass/thermometer display. 3. On Electronic Vehicle Information Center (EVIC) and Compass Mini-Trip Computer (CMTC) equipped vehicles depress the Reset push button and hold the button down until "VAR = XX" appears in the display. This takes about five seconds. On Compass Temperature Module (CT) equipped vehicles depress the C/T push button and US/M push button down until "VAR = XX" appears in the display. This takes about five seconds. 4. Release the push button(s). "VAR =XX " will remain in the display. "XX" equals the current variance zone setting. 5. On Electronic Vehicle Information Center (EVIC) and Compass Mini-Trip Computer (CMTC) equipped vehicles momentarily depress and release the STEP button to step through the zone numbers, until the zone number for your geographic location appears in the display. On Compass Temperature Module (CT) equipped vehicles depress the US/M push button to step through the zone numbers, until the zone number for your geographic location appears in the display. 6. On Electronic Vehicle Information Center (EVIC) and Compass Mini-Trip Computer (CMTC) equipped vehicles momentarily depress and release the RESET push button to enter the displayed zone number into the EVIC/CMTC module memory. On Compass Temperature Module (CT) equipped vehicles depress the C/T push button to enter the displayed zone number into the electronic module memory. 7. Confirm that the correct directions are now indicated by the compass.

May 17, 2014 | 2006 Dodge Caravan

1 Answer

How do you calibrate the compass on a 2002 Ford Windstar


Copied from alldatadiy.com for 2002 Ford Truck Windstar V6-3.8L.....


Compass Calibration

1. Start the vehicle and locate the compass module mounted on the base of the mirror.

NOTE: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential electrical accessories (rear window defrost, heater, A/C, map lamps, wipers, etc.) and make sure all doors are shut.

2. Press the RESET button until RESET to CAL is displayed in the message center display.

NOTE: To exit the calibration adjustment mode before carrying out a compass adjustment, turn the ignition switch to the OFF position.

3. Slowly drive the vehicle in a circle no more than five times at no more than 5 km/h (3 mph) until CIRCLE slowly changes to CALIBRATION COMPLETED in the message center display.

Jun 21, 2012 | Cars & Trucks

1 Answer

Compass direction wrong


Compass Calibration
Before calibrating the compass, drive the vehicle to an area that is magnetically clean or free of large metallic objects. Verify there are no magnetized objects on the inside or outside of the vehicle close to the mirror.

Start the engine.
Press and hold the switch for the compass, which may be depicted as COMP, COMPASS, or On/Off (w/UE1) depending on the type of mirror on the vehicle, until the letter "C" or "CAL" is displayed.
Drive the vehicle in circles at a speed of less than 8 km/h (5 mph) until the "C" or "CAL" is replaced by a proper vehicle heading. The calibration procedure is now complete.
Compass Magnetic Variation Adjustment
Magnetic variation adjustments are required when the compass displays a constant error in heading. Variation is the difference between magnetic north and true north due to geographical location.

Nov 09, 2010 | 2004 GMC Envoy

1 Answer

Built in electronic compass on 2004 GMC Envoy is giving the wrong directions


Try the following;

Compass Calibration
Before calibrating the compass, drive the vehicle to an area that is magnetically clean or free of large metallic objects. Verify there are no magnetized objects on the inside or outside of the vehicle close to the mirror.

Start the engine.
Press and hold the switch for the compass, which may be depicted as COMP, COMPASS, or On/Off (w/UE1) depending on the type of mirror on the vehicle, until the letter "C" or "CAL" is displayed.
Drive the vehicle in circles at a speed of less than 8 km/h (5 mph) until the "C" or "CAL" is replaced by a proper vehicle heading. The calibration procedure is now complete.
Compass Magnetic Variation Adjustment
Magnetic variation adjustments are required when the compass displays a constant error in heading. Variation is the difference between magnetic north and true north due to geographical location.

Nov 09, 2010 | 2004 GMC Envoy

1 Answer

How to adjsut the rear brake cable on a 97 crown


Over time those SS steel cables stretch. Most of the older Fords have an adjustment in the cable just before it splits into 2 cables running to the rear wheels. Should be a easy find.
PS. Don't over do the adjustment... a bit of penetrating oil the day before the attempted adjustment will make the job MUCH easier....
Hope this helps.

Oct 09, 2009 | 1992 Ford Crown Victoria

2 Answers

2007 jeep compass. compass will start, but will


check manual shift valve linkage adjustment .some thing loose or a missing.

Jun 30, 2009 | 2007 Jeep Compass Limited

1 Answer

Rear Rotor removal problem


you have to adjust the parking brake down, using a flat head screwdriver you must turn the starred adjuster wheel counter clockwise to adjsut the parking brake down and allow you to remove the rotor

Apr 11, 2009 | 2002 Hyundai Santa Fe

2 Answers

Compass out of whack


You need to recalibrate the compass. The procedure is in your owners manual. Here are the basic steps.

First, you will need to verify that your compass zone is set to your current geographic location. Since I do not know where you are located, I cannot tell you the code. They are listed in the manual. (For example, So Cal is zone 5.)

Second, here is the compass calibration adjustment procedure:

Perform this adjustment in an open area free from steel structures and high voltage lines. For optimum calibration, turn off all electrical accessories (heater/air conditioning, wipers, etc.) and make sure all vehicle doors are shut.
1. Start the vehicle.
2. To enter the compass calibration mode, press and hold the button for greater than eight seconds. The display will then show CAL in the display window.
3. Drive the vehicle slowly (less than 3 mph) in circles until CAL indicator turns off. As many as 5 complete circles may be required.
4. The compass is now calibrated.

Dec 19, 2008 | 2005 Ford F-150

Not finding what you are looking for?
1999 Isuzu Trooper Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14394 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...