Question about Ford Explorer Sport

2 Answers

My remote for my car is not working. The battery is new and works on the battery pad in Autozone, but when I try to unlock or lock my car it doesn't work. This is causing me not to be able to turn my car on because of the alarm and the ignition wont start. is there a way to disconnect the alarm so that I may turn my car on. I just don't want the alarm anymore due to this.

Posted by on

  • 2 more comments 
  • shane_haywoo Feb 07, 2010

    So what should I do to solve the problem. The alarm keeps coming on which is not allowing me to crank the car. What should I do to start it?

  • shane_haywoo Feb 07, 2010

    My 1999 Ford Explorer Remote doesn't work and I was needing to know an alternative way to turn my car on. The alarm keep coming on and will not allow me to turn my car on.

  • shane_haywoo Feb 07, 2010

    1999

  • shane_haywoo Feb 07, 2010

    No, that didn't work. Any other suggestions?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

What year is the explorer?

Posted on Feb 07, 2010

  • blueextc3221
    blueextc3221 Feb 07, 2010

    Try to reprogram the keyfob first...





    1. Turn ignition from OFF to RUN 8 times within 10 seconds, with the
    8th time ending in RUN. Door locks will cycle to confirm
    programming mode.


    2. Within 20 seconds press any button on first keyless remote.
    Door locks will cycle to confirm programming.


    3. Within 20 seconds, press any button on second keyless remote.
    Door locks will cycle again to confirm programming.


    4. Turn ignition to OFF.
    Locks will again cycle to indicate end of programming mode.




    Let me know.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

The module is at fault. You can not bypass this for if you do it still won't start. The module runs in sync with the theft deterent system wired to the computer for its programmed this way

Posted on Feb 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Change the battery in my 2007 Hyundai Sonata and now my radio won't work how do I get a code and put it in?


Hyundai Tiburon Questions - how do i reprogram my lock ...

www.cargurus.com > Questions > Hyundai > Tiburon

CarGurusAug 17, 2009 - how do i reprogram my lock remote to my car? i changed my battery an ... i change my battery an now my lock an un lock buttons dont wor. ... I have aHyundai 2003 Tiburon, and the following worked for me, get in your ... The unlock codeis inside the case. ... Now my radio interior lights and clock wont work.

Hyundai replaced car battery now radio doesn t Cars ... - Fixya

www.fixya.com > ... > Cars & Trucks
Hyundai cars & trucks replaced car battery now radio doesn t questions and answers ... replaced my battery,, now key remote radio & clock does not work.. thank you ... ...car If you didn't do this before you replaced the battery, then there is another code ... I put a new battery in my 2003 sonata and now the radio doesn't work.

Jan 06, 2016 | Hyundai Cars & Trucks

1 Answer

94 full size blazer keyless remote doesn't work.


Does the spare remote work? Have you tried to reprogram it? These remotes are very cheaply made and prone to key pad failure. To program the remote click this LINK, if that doesn't work buy anew one on eBay for cheap.

Jun 13, 2012 | Cars & Trucks

1 Answer

My keyless entry pad stopped working replaced the battery and still will not work. I have a 2001 ford taurus ses. how do i resolve this problem by reprogramming the keyless entry pad? I tried the code lock...


Try it with a new remote pad, turn the key back and forth untill the locks jump up and down.. do it slowly , when they jump make sure to leave the key in the on position while pressing both lock and unlock buttons on the remote, they should then jump again telling you that the remote is now programed.

Apr 14, 2011 | Ford Taurus Cars & Trucks

1 Answer

The key fob sometimes does not lock or unlock car doors. i have had a new battery fitted.but still not working properly.


Hello,
Most of the keyfobs have instrctions on the back, or on the inside cover on how to change the battery in the keyfob and then reactivate.
If you can't find the instructions, you can try the following.

From outside of the vehicle, with all of the doors closed, push the unlock button, then the lock button, then the unlock button, then the lock button.
If that doesn't work;
Those keys/key pads, are highly sensitive to interfearence from other remotes, such as other keys with chips, garage door openers, etc., try to make sure that no other electronic products are near your keyfob.

I hope this helps you.

Feb 19, 2011 | Hyundai Tucson Cars & Trucks

1 Answer

THE REMOTE STARTER DOESN.T WORK AT ALL. tHE STARTER DOESN;T WORK OR THE ALARM OR OPENING TRUNK OR EVEN LOCKING OR UNLOCKING THE DOORS. i RECENTLY GOT A NEW BATTERY FRIOM THE PONTIAC DEALER HOPING TO FIX...


have you checked if the battery is placed properly in the key.when you press the remote alight on the key should glow.if not so then check the key battery.if fine then the cause is elsewhere.

Jan 02, 2011 | Pontiac Grand Prix Cars & Trucks

1 Answer

I have a 1999 Subaru Impreza- Remote locking


First, it may seem obvious, but check the fuses associated with the remote unlock. Next, go to Autozone or somewhere like that where they have a remote tester. That will tell if the remote is functional. If the remote works and the fuses are good, see if you can find out how to program remotes to it. It may have forgotten the code for that remote.

Dec 03, 2009 | 2003 Subaru Impreza

1 Answer

Remote not working, why


Sometimes they just stop working, idk why, sometimes the battery dies. Try this: lock the doors with the switch in the car - turn the from off to on without starting the car eight times ending in the on position - the locks should unlock then lock themselves - then press unlock on the remote - the lock should unlock - turn the key to off and remove then try the remote again. If nothing happened, replace the battery and try to program again. if that doesn't work, get a new remote.

Aug 14, 2009 | 2006 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

78238 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5653 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...