Question about 2007 Pontiac Montana

2 Answers

2003 pontiac montana key wont turn first time this

2003 gm pontiac montana key wont turn first time this has happend ???

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

The tumblers in the ignition cylinder is jambed.
replace the lock cylinder to fix this problem

Posted on Feb 07, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 617 Answers

The key your using is it an OEM key or a key had made? or your cylinder key is getting worn, if worn need to be replaced. can try putting some grafite oil in key cylinder could have dirt indide causing to stick

Posted on Feb 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wondering if I can change the starter on my 2003 Montana with a starter from a 2002 Montana?


PUT A BREAKER BAR ON ENGINE CRANKSHAFT BOLT AND SEE IF YOU CAN GET THE ENGINE TO TURN OVER BY HAND,IF IT WONT TURN, SOUNDS LIKE SOMEONE SOLD YOU A EHICLE WITH A LOCKED UP ENGINE. GOOD LUCK!!!!1

Jul 21, 2013 | 2003 Pontiac Montana

1 Answer

How do you reset the change oil light on a 2002 pontiac montana


On most GM models, you turn the key on but don't start the engine.
Depress the gas pedal to the floor quickly three times.
The light should flash a few times then go away.

Dec 09, 2012 | 2002 Pontiac Montana

1 Answer

I lost the key to my 2000 pontiac montana minivan how do I get a new one or can I take the switch out without the key


go to your local GM deailer they can take the vin# from the car and cut you a new key.

Oct 02, 2011 | 2000 Pontiac Montana

1 Answer

I have a 2003 pontiac montana 3.4 yesturday it ran fine parked it and now it wont start when u turn the key on it is making a noise behind the speedometer area like a door opening and closing . the gauges...


That'ts the sound of your starter trying to pull enought power to turn the engine over. Sounds like you need to charge or change the battery - have you tried getting a jumpstart? Get a jump and drive over to a shop where they can check your battery and/or your alternator.

Sep 05, 2011 | 2003 Pontiac Montana

1 Answer

I have a pontiac montana 2003 and lost original ignition key but found a spare I had made at walmart, the van wont start. I can turn the key but it does not crank or even turn over and I tryed to jump it...


Did your factory key have a little black thing on the blade with a wire on each side? I believe you have the PassLock II factory anti-theft system, as this was standard on all models. You cannot use a WALMART key to start the car. You need a factory key with the right resistor in it. Your dealer can look up the resistance you need from the VIN on the car. Some locksmiths may also be able to do this. Get a blank key with the right resistor and have them cut it to match your WALMART key.

Sep 06, 2010 | 2003 Pontiac Montana

1 Answer

When I try to start my 2003 montana, the relay under the hood clicks but the starter will not turn. I have checked the starter assy and it is OK. I think it may be my security system acting up. Can the...


Most likely the passlock sensor will need replaced and the key reprogrammed unless you recently replaced a key that never got programmed listed below is detail instructions on reprogramming a the passlock to the key.
PASSKEY LOCKOUT RESET ALL GM CARS 1999 AND UP
1) Put the key in the ignition and turn to the "ON" position. Leave it that way for 10 minutes. After 10 minutes turn the key and take it out. Repeat this process (2) more times (3 times, 30 minutes total) This should reset the PASSKEY system to recognize your key
.

Aug 11, 2010 | 2003 Pontiac Montana

2 Answers

2003 Pontiac Grandam wont start


if you are not hearing the pump turn on there's a good chance that its the fuel pump most gm's have a faulty wiring on the fuel pump harness id check the relay and wiring if theirs power to the pump but not crank that would be it id get a gm pump not a carter better to use oem

Sep 27, 2009 | 2003 Pontiac Grand Am

Not finding what you are looking for?
2007 Pontiac Montana Logo

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...