Question about Hyundai Motor 1996 Elantra

1 Answer

Can you please describe how to install a cd player in a 96 Hyundai Elantra?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 306 Answers

Disconnect the negative battery terminal to prevent
an accidental short circuit. Pop out the dimmer
switch panel and remove (1) Phillips screw
exposed. Unsnap the gear shifter trim plate and
remove (1) Phillips screw exposed at the base of
the dash trim bezel. Reach under the driver's
side dash, locate the temperature control cable
and remove the cable from the white plastic
bracket. Position the gear shifter in low, pull the
dash panel away and disconnect all wiring harnesses.
Remove the trim bezel (the temperature
controlcable will be attached). Remove (4)
Phillips screws securing the factory head unit
and disconnect the wiring.

Posted on Feb 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code 43 0n my 2008 hyundai elantra cd player


Error code 43 0n my 2008 hyundai elantra cd player

Dec 06, 2010 | Hyundai Elantra Cars & Trucks

1 Answer

1996 hyundai lantra cylinder head torque spec


dak408_40.gif
Revised Bulletin
This TSB supersedes the Cylinder Head Bolt Torque Specifications previously described in TSB # 96-20-003, TSB # 96-20-003-1 and TSB # 97-20-004.
DESCRIPTION:
This bulletin provides torque specification corrections to the 1996 and 1997 Elantra Shop Manual, 1997 Elantra Service Data Book, 1997 Tiburon Shop Manual and 1997 Tiburon Service Data Book.
Please record the corrections (listed) in the appropriate manuals and write the TSB number on the bottom of the pages listed below for future reference.
CYLINDER HEAD BOLT:
(M10) 30 Nm (300 kg.cm; 22 lb.ft) + (60°to 65°) + (60°to 65°)
(M12) 35 Nm (350 kg.cm; 26 lb.ft) + (60°to 65°) + (60°to 65°)

Nov 21, 2010 | Hyundai Motor 1996 Elantra

1 Answer

How to remove the radio cd player from a 2005 hyundai elantra


I had a flat battery and now need to remove the radio cd player to find the security pin which is apparently on the back of the radio. How do i go about this without spending heaps.

Feb 01, 2010 | 2005 Hyundai Elantra

2 Answers

I have a 2002 Hyundai Elantra, I changed the battery , now I need the reset code for the CD player HM 5064. I cannot find my manual. Can anybody help?


Normally the Audio (Radio CODE) is noted in the owner's manual. If you don't have it, you must contact Hyundai Motor America and give them the Vehicle VIN number... they may then (possibly) be able to give you the CODE.

Nov 01, 2009 | Hyundai Motor 2002 Elantra

1 Answer

1998 hyundai elantra,i changed the fuel pump and and the relay and still nothing,help!!


When I put a Cd in the cd player it says error 42 Hyundai azera 2006

Oct 24, 2009 | 1998 Hyundai Elantra

1 Answer

Problem with CD player


get a good cd player not a stock one sorry best i can do

Mar 13, 2009 | Hyundai Motor 2002 Elantra

1 Answer

Need to replace the radio/cd player in my 2001 elantra


on the hyundai you will usaually see four small holes two either side of the radio unit itself. if you take 4 allen keys/hex keys and insert all at the same time making sure to keep them very straight the stereo unit shuld then be free to pull out. you will then find that it has a universal plug on the back of it and you should be able to plug and play with that. if wrong size/type of plug then buy a convertor from motor discount store.

Feb 25, 2009 | 2001 Hyundai Elantra

1 Answer

04 hyundai elantra gt


first step is check your automatic transmission fluid level exactly the way the owners manual describes how to do it.

Aug 30, 2008 | 2004 Hyundai Elantra

Not finding what you are looking for?
Hyundai Motor 1996 Elantra Logo

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...