Question about 1999 Dodge Dakota

1 Answer

I DONT KNOW WHERE ELSE TO LOOK FOR THE FUSES IR HOW TO REMOVE THE

HEADLAMPS ARENT WORKING WHAT COULD BE THE PROBLEM

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

Where have you looked? Headlight switch, hi-lo beam switch. I have had problems with the Bulkhead connector at the firewall ( big connector under master cylinder)

Posted on Feb 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fix wonky, flickering, non working headlights


Replace the turn signal switch. All the exterior lights except the high mount brake light run thru it.

Nov 22, 2014 | 2006 Volvo XC90

1 Answer

Horn dont work


could be fuse or relay, check for power at horns while horn pad depressed if fuse is ok (remove right headlamp assm, horns are inside bumper under headlight)

Mar 05, 2014 | 2006 Buick Rendezvous

1 Answer

Fuse keeps blowing dash lights and tail lights dont work jeep cherokee sport 1999


There are several fuses involved. I need to know which one(s). As for the taillights, the primary power source is 20A fuse 17 in the power distribution center. The tan/blk wire connects to the headlamp switch which, in park position, applies +12 volts through 10A fuse 7 in the junction block to the left tail light. The headlamp switch, in park position, also apples +12 volts through 10A fuse 23 in the junction block to the right tail light.

I need to know which fuse is blowing the instrument lights so you will have to follow up

Sep 07, 2012 | 1999 Jeep Cherokee

1 Answer

Why do my headlights not come on when all other lights a re working fine?


There is a main fuse/relay box located under the hood. It may be on either side of engine compartment. Remove the cover and locate the fuses/relays. Each section should be marked as to what each fuse/relay is for. Typically, there is either a fuse or relay for each headlight. They are usually marked with the letters LH (left headlamp) or RH (right headlamp). If there are fuses under each heading, check fuses with a fuse tester. If you do not have a fuse tester, simply remove the fuses and check to see if it is blown. If the fuses are good, the next step would be to check the relays. To do that, with engine and key off, remove a relay from another section (check to make sure the prongs match) and insert relay into headlamp relay socket. If headlamp comes on, simply replace the relay. If the problem still exists, have it serviced by a qualified mechanic certified in automotive electrical systems. I sincerely hope that I was of some help with your problem. Please feel free to let me know of your progress with this situation. Thanks.

Jun 15, 2010 | 1998 Ford Taurus

1 Answer

Horn dosent work, dont know if iam missing anything i know the wires arent hooked up but tried and still nothing hooked horn to battery and it worked, i dont know if iam missing anythin from the steering...


take a test light and hocke it up in wire for horn under car ground test light.have someone push horn if it does not light work your way back fuse horn button etc it allso a horn realy

Mar 27, 2010 | 1988 Chevrolet Camaro

1 Answer

Tail lights don t work


Remove the headlamp switch. Check power at the brown wire. If you have power then the problem is after the switch. If you don't have power with the headlamps on then recheck the fuses.

Jan 20, 2010 | 1990 Ford Mustang

1 Answer

Headlights dont work, but park lights and signal lights do. all fuses in passenger kickpannel are good. Is there anoyher fuse box.


there should be another fuse / relay box under the hood - the headlamps will probably have a fuse and a relay. if the fuse is ok - try swapping the headlamp relay with another in the box - if all is ok start looking at the headlamp and or highbeam switches

Oct 24, 2009 | 1998 Jeep Grand Cherokee

1 Answer

My headlights dont work,.all other lights are fine though,.is it the fuses or the bulbs? im not sure what fuses they would be,.there seem to be different ones for the same thing


do your flash to pass lamps light when you pull the stalk towards you? If yes, the bulbs are ok.
Do the hig beams work?
Your headlamps have sepaerate fuses for each headlamp and you have a low beam relay and a high beam relay under the hood in the black box.
If everything is out, I suspect a bad headlamp switch.
Check car-part.com and look on page with * for cheapest price.

Your owner manual will identify fuses & relays.

PS, You did not recently instal high current bulbs did you? If yes, put originals back in.

HEADLAMPS

The voltage is supplied to the lamp switch through a fuse. This fuse is located in the central junction box in the left-hand footwell.
When the headlamps are switched on, a voltage is supplied to the high beam/low beam switch and to the low beam relay. The relay for the low beam is located in the battery junction box (BJB) in the engine compartment.
If the high beam/low beam switch is set to "low beam", then a voltage is supplied through the low beam relay to the low beam part of the headlamp assembly. The left and right-hand low beams are fused separately. The fuses are located in the battery junction box (BJB) in the engine compartment.
If the high beam/low beam switch is set to "high beam", then a voltage is supplied through the high beam relay to the high beam part of the headlamp assembly. The left and right-hand high beams are fused separately. The fuses are located in the battery junction box (BJB) in the engine compartment.

----------------------------------------------------------------------------------------------------------
Lamp Switch
Removal
  1. s2y~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
    Remove the lower driver's side footwell trim.
  1. Detach the lamp switch bezel.
    • Remove two screws.
  1. Remove the light switch.
    • Remove three screws.
    • Disconnect the electrical connector

Feb 23, 2009 | 2005 Ford Focus

2 Answers

Headlights stop working but i dont know the head light fuse number and location for 1999 ford explorer xlt


https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

here you go is in manual free from ford

Dec 27, 2008 | 1999 Ford Explorer

Not finding what you are looking for?
1999 Dodge Dakota Logo

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8274 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...