Question about 1999 Pontiac Bonneville

1 Answer

When turn the egnition switch it doesn't enage the starter. the radio works fine, the gauges are reading ok

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

You definetely need a locksmith because the ignition lock key reading sensor wires are broken it is a well known problem I would not allow anyone to say that they will fix it what I would ask is if they are going to replace the ignition if they say they are repairing find someone that will, get ready to pay about 200 it's a good price.

Posted on Feb 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford transit 20. td mk6, engine just cutout, turns over fine but wont start any ideas and yes plenty of diesel in the tank.


If it is cranking, starter and egnition are fine, it could be fuel pump, If you can get someone to turn egnition ON, while you put your ear as close as you can to the fuel pump maybe the back seat or in the trunk, you should hear it humming, means its working,

Feb 26, 2017 | Ford Transit Cars & Trucks

1 Answer

Does a bad egnition switch on a doge 2005 sxt cause the engine not to turn over but the lights and radio works...and how can i fix thie problem. Of my car not turning over but has power?


It sounds like your immobiliser has come into operation. There is a chip in the ignition switch and a chip in the key. If both are present and paired, the Engine Control Module releases power to the starter and ignition. You can try and reset it by disconnecting the battery for an hour. Make sure you know your radio code!

May 09, 2016 | Cars & Trucks

1 Answer

Silverado gauges stop start


sounds like a bad starter solenoid switch or a fusible link most likely a bad starter solenoid

Jan 30, 2013 | 2001 Chevrolet Silverado 2500HD

2 Answers

1996 Toyota tercel doesn't start doesn't crank


Well you may have more than one problem.
As far as cranking, a mechanic would check for voltage at the starter and trace back to the key switch. The key switch could cause both problems. There is also a neutral safety switch that could cause it not to crank.
You could also have a bad ground connection between the engine and body.

Dec 11, 2012 | 1996 Toyota Tercel

1 Answer

2004 olds alero 3400 eng.turn on key and all warning lights and gauges come up,then all goes off after 3 seconds,starter will not work,can start by jumping across starter and runs fine and shifts fine


Check for power at the switch wire when someone turns the key to start. I would say there is a break in the circuit of the thin wire between the starter & the ignition switch

Oct 03, 2012 | 2004 Oldsmobile Alero

1 Answer

Jeep stalls gauges don't work windows and locks and radio don't work


when you state it wouldn't crank, do you mean the starter won't engage or that it just spins over and doesn't start? if no gauges or no starter engagement, then check the battery, battery connections,and the starter for excessive amperage draw. if the starter spins and the engine won't start, then check crankshaft position sensor first. the crank sensor is a more common failure than the distributor or any of the other things you mentioned.

Jun 14, 2012 | 1998 Jeep Grand Cherokee

1 Answer

My 2000 Toyota tundra will not start, i replaced fuse's and got to the starter i was able to get the starter to turn and my readings read it was fine, i clean my battery post's and cables but still...


make sure your getting power to wire on starter as you turn the key to start position if not ignition switch could be faulty if you are getting power to starter coud be your starting motor

Sep 16, 2011 | Toyota Pickup Cars & Trucks

1 Answer

When trying to start my 1999 GMC Jimmy I turn the egnition and all my aux. lights turn on and everything works, but there is no power going to my starter, it doesn't make the clicking sound and it...


check for power to starter solinoid, if power to there. then it has to be a bad starter solinoid or starter. checker solinoid first. if bad you will not hear any clicks or anything.

Sep 11, 2011 | 1999 GMC Jimmy

1 Answer

Gauges go out, car runs fine, radio works, abs light on turn signal works


this is a body control module (BCM) fault, replace it..

May 30, 2009 | 1997 Dodge Caravan

Not finding what you are looking for?
1999 Pontiac Bonneville Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...