Question about 1995 Jeep Grand Cherokee

1 Answer

Dash board lights don't turn on wat could be the problem

Posted by on

  • mike watson
    mike watson May 11, 2010

    have you tried checking the dimmer switch for the dash/interior lights it may be turned way down?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

Get ready to work upside down, first get an electrical diagram of your dashboard, find the power wire, get a paperclip and uncurl it, stick it inbetween the power wire and its holder (so the paperclip touches the copper of the wire). next turn the key to the on position, and turn on the lights. (make sure you do this briefly because it will drain your battery) then get a DVOM or a test light, ground them, and see if your dashboard lights are getting power by sticking the lead onto the paperclip. if it is then there is something wrong with the lights themselves. if not, check to see if your power wire is broken, chaffing, shorting, anything wierd. if its not broken then bring to the dealership. if it is broken then replace the wire. 

i do not own a jeep so i cannot tell you exactly how to take apart the dashboard (if the lights are bad) but if you dissasemble it from bottom to top slowly and carefully you should be able to access the lights.

Hope this helps!
                       Joe.

Posted on Feb 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No lights in any dash board cluster


In the fuse panel, check 15A FUSE 4 and 4 A FUSE 10.

Nov 17, 2016 | Ford F-250 Cars & Trucks

1 Answer

I have a 2002 BMW X5 3.0i & my dash board lights


check them one by one all.you can also test this whit test light.
ground on the door arret and pin on the fuse,

Jul 07, 2013 | Cars & Trucks

2 Answers

2005 PT CRUISER LIGHT ON DASH SAYS NO FUSE RADIO DON'T WRK DOOR LOCKS DON'T WORK INTERIOR LIGHTS DON'T WORK


I hve the same problem go under the hood for the fuse box you will c a fuse that has a blk clip around the whole fuse it self to open it use a small screw driver the ones u use for ur glasses nd open it c if it needs to be changed out if good jst unplug it nd c wat it does on my car I jst unpluged it nd now everything working I think its called a iud some wired name but u can't miss it good luck

Nov 03, 2012 | 2005 Chrysler PT Cruiser

1 Answer

All the gauges in the car does not work including the digital odometer, but the dash lights work along with everything else on the van. wat is the problem?


It is likely that it's the main wire connector pins on the instrument cluster circuit board. By re-flowing the solder on the 13 pins, you will probably resolve the problems. This is even more likely to be the problem if there has been erratic dash board, gauge, idiot light behaviour. Let me know if you need instructions on how to remove the instrument cluster to re-solder the 13 pins. It actually doesn't take too long.

Sep 13, 2011 | 2002 Dodge Grand Caravan

1 Answer

The dome light will not go off. I am looking for the fuse which will shut it off so I don't waste the battery until I can see what ia going on tomorrow


Don't pull the fuse ... the light is probably not the only thing on the circuit. Make sure the light has not been turned on using the switch on the dimmer for your dash board lights. If this is not the case and you still want the light to be off ... remove the bulb. Simple

Here is your reply in fewer than 120 seconds.

Thanks for your question @ FixYa.com

Jun 29, 2011 | 1996 GMC Savana

1 Answer

Dash board illumination not bright enough


look on the left of dash for the switch you turn your interior lights on turn it see if your dash light will brighten.turn up enough brighten dash lights. dont turn until it stop or your interior light will stay on.

Apr 13, 2009 | 2000 Chevrolet 2500

1 Answer

Hook at the back dash board


Wat actually if hook at the back dash board?

If it is the seat you are trying to open down to see thru your trunk/ boot, press the know in the boot down to open.

Apr 06, 2009 | 2003 Toyota Corolla

2 Answers

1986 pontiac fiero problem with dash board lights


did you install a new stereo? its an odd question but if u did i can tell you exactly what went wrong.

Nov 08, 2008 | 1986 Pontiac Fiero

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...