Question about 1997 Dodge Ram 1500 Club Cab

1 Answer

Trying to remove the water pump on my Dodge 1500 Club cab 4X4. Unable to losen the main nut behind the fan and fan clutch. Any suggestions? Have a manual but poor description and pictures don't help. I have tried to follow what manual says but no luck.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

It may be left hand threads.Try turning it in the Cwise direction. Hope this helps>

Posted on Feb 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water pump replacement


I've never worked on this sort of vehicle but when I replaced my water pump in another, I had to losen the Alternator to get the belt off since it went to both. You'll need to get a manual on your vehicle from an auto parts store. THere should be directions in that about how to replace your water pump.

May 17, 2014 | 1996 Dodge Ram 1500 Club Cab

1 Answer

Need to know how to remove nut on water pump to remove fan/ clutch. have wrenchs


That is about a 36 mm wrench,which is close to
1 7/16".
You will have to borrow one,then use a long pry bar to hold the
nuts on the pulley to pump,so it won't turn

The fan screws on normal direction, as I recall

Mar 06, 2011 | 1996 Dodge Ram 1500 Club Cab

1 Answer

How do you replace the water pump on a 1996 dodge ram 1500 with a V8 engine?


remove then neg battery terminal. remove the serpitine belt. remove the fan clutch assembly. remove the fan shroud. remove the altinater and a.c pump. remove the alt and a/c pump bracket. remove the heater hose and inlet pipe. remove the intake manifold cooling hose. remove the lower radiator hose from the pump. finally unbolt the pump and remove. be sure and drain the coolant first. hope this helps

May 31, 2010 | 1996 Dodge Ram 1500 Club Cab

1 Answer

I have a 1996 dodge ram 1500 4x4 and im trying to remove the front hub assembly off the passenger side and cant figerout how to get the 3 boults out that houled it on. i can get the center one off


just remove the nuts on the back side of the hub. the hub will still be firmly in place. you will have to beat either the hub itself or on the bolts from the back to get it loose. they are usually in there pretty tight, so it will take quite a bit of force to get it loose.

Oct 20, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

Unable to remove fan from water pump


Remember, fan has a reverse thread. Righty-tightey, lefty-loosey does not apply. You need a clutch fan wrench. (available at your local auto parts store.)

Aug 16, 2009 | 2004 Dodge Ram 1500

1 Answer

Locate where the fuel pump is


for the most part the fuel pump is in the gas tank andtry this website to see if you can get a diagram www.alldatadiy.com

May 25, 2009 | 1996 Dodge Ram 1500 Club Cab

2 Answers

Water pump 1996 dodge ram van 318 2500


Before you remove the serp belt, loosen the clutch fan bolts from the water pump. Other wise you will be fighting with them later. Other wise just drain the coolant and remove the pump. I would suggest a new thermostat since the coolant is drained. Make sure the block surface is cleaned of all gasket material and other dirt before installing your new pump. I usually scrape the area with a putty knife and wipe it down with some brake clean on a rag.

May 20, 2009 | 1996 Dodge Ram 2500 Club Cab

2 Answers

Clicking noise in front end 2001 dodge ram 4x4


the ansew i found is replacing the seal around the joint and from both end removing it and cleaning it out i had rocks in mine from going threw water and mud ita a all day deal but a twenty doller fix axle shaft oil seal is all i had to replace

Apr 05, 2009 | 1997 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...