Question about 2005 Buick LeSabre

1 Answer

I want to change the light bulbs in my dash board. how?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 105 Answers

Look at the whole basil, there is a front cover, that is over, the basil, take all screws out of the plastic cover, then you will have screws holding the actual basil in, i believe they are either a quarter inch or five sixteenth, take them out the whole speedo cluster should pull out some , you may have to take speedo cable loose, also they might be some plugs you have to remove, mark them if needed, to remember where they go, once that is done, flip the cluster over, and all the bulbs twist out, replace the same way you took out

Posted on Feb 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO CHANGE DASH BOARD LIGHT BULB


You going to have to buy a manual for your vehicle and take apart the dash so you can install the bulbs. Not to complicated your looking at about 1 to 2 hour job. Good luck

Jan 22, 2015 | 1998 Buick Riviera

1 Answer

2004 Sierra dash board clutser lights not working


there two different bulbs that fit GM dash printed circuit boards one is the 194 wedge bulb and the other is small GM carry's them if you can find a smart parts counterman. NAPA carry's them also can not remember part number a new item since July 2013.

Nov 13, 2013 | GMC Sierra Cars & Trucks

1 Answer

I want to change the dash board light bulb in my cars but cant find out how to do it or whas bulbs to buy


the bulbs are led and are built into the dash gauge cluster, non replaceable i believe, best bet call dealer and ask for bulbs

Jun 08, 2012 | Cars & Trucks

1 Answer

Peugeot boxer van 2007 changed interior light bulb blew fuse, renewed fuse, lights worked, but emissions lights on dash board came on and won't go out. Help


Try reading the OBDII with a code reader and see what it is then erase codes and see if it stays off ,could be more than one circuit on this fuse so the fuse blowing has thrown the light on for whatever reason ,Also try disconnecting the battery just out of interest for a few minutes and reconnect it might go out if your lucky

Feb 27, 2012 | Cars & Trucks

1 Answer

Dash light


It sounds like the headlight switch is bad.

Apr 22, 2010 | 2000 Mitsubishi Eclipse

1 Answer

DASH LIGHTS WON'T COME ON.THE FUSE IS GOOD 1990 CHR.IMPERIAL


tray to check fuse and relay. If both are okay. you can change the light bulb in dash board. Just take out the dash board, remove and replace the bulbs. Make sure fuse is okay. Is the signal light works in the dash board?. Let me know

Oct 04, 2009 | Chrysler Imperial Cars & Trucks

1 Answer

When i turn my head lights on the dash board lights dont come on my car is a r reg fiesta


You have a blown up bulb inside the dash which means you will need to get the dashboard out in order to change this bulb..It is a time consuming task unfortunately..

Sep 06, 2009 | 1997 Ford Econoline

1 Answer

Problem witn my break lights


there is something wrong with the bulbs that you put in. make sure you put the double filament type bulbs. somehow its arching across back to your displays. this is a common problem at my shop.

May 19, 2009 | 1996 Toyota Camry

1 Answer

1998 BMW 528i Electric problem in the dash board


replace relays and fuses for the power seat and windows.change dash light bulbs.if bulbs are good you got wiring problem check ground wires.

May 05, 2009 | 1998 BMW 5 Series

1 Answer

The dash board panel lights are out for the most part. The speedo is 1/2 iluminated. Could this be a fuse ? If not, how involved is it to change the lights?


i think it could be bulb issue.

you have to remove the dash board and replace bulbs that are busted. replacing the bulb is no problem . the problem is taking the dash off. need to remove the dash cover first before you can remove the actual dash.

another thing to consider is the speedometer cable which is attached at the center of the gauge.

tnx 4 using fixya,

drcool

Oct 28, 2008 | 2006 Toyota Sequoia

Not finding what you are looking for?
2005 Buick LeSabre Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...