Question about Toyota Camry

1 Answer

Just changed water pump timing belt, all tensioners (dyi). timing seems to be off,

Posted by on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

A couple ways to tell is to check the vacuum. If its low then the timing belt is off a tooth or two . Another way is to check the data on a scanner and check to see if you have any codes.

And the last way is to double check all your marks. on the cam and the crankshaft.

All we can do is guess since we dont know the year or engine size but even if we knew this we would still have to use diagnostic tools and hands-on inspection.

Posted on Feb 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change a timing belt tensioner on subaru outback 1997?


Need auto-technician for this job is not just the tensioner,you my need New timing belt,new , idle new tensioner ,new crank and cam shaft seals and water pump and 3 to 3 and 1/2 hour labour .

Oct 02, 2012 | 1997 Subaru Legacy

3 Answers

When should the timing belt be changed


I want to say it is every 100,000 miles. At the same time you do the timing belt replace the water pump and belt tensioner as well. They may not seem bad but go ahead and do it while being in there. It will save you problems down the road

Aug 20, 2012 | 2006 Saturn Vue

1 Answer

After changed a new water pump,timing belt,idler pully,tensioner for 2004 lexus ls 430, when start engine has a noise look like from pully


COULD BE A BAD BEARING IN THE IDLER PULLY OR THE TENSIONER ON THE TIMING BELT OR THE SERPENTINE BELT. IF ITS A SQUEEL IT MAY BE SOME COOLANT GOT ON THE SERPENTINE BELT. TRY TO WASH THE BELT WITH WATER AND LET DRY COMPLETELY. IF NOISE REMAINS RETURN TO THE SHOP THAT DID THE WORK.

Jul 17, 2012 | Lexus LS 430 Cars & Trucks

1 Answer

1994 accura integra how do you replace water pump without replacing timing belt


Hi:
Sorry, but the timing belt must come off to remove the water pump, because that is what spins the water pump.

Common sense says to replace the timing belt and tensioner when the water pump gets changed, and change the waterpump when you change the timing belt...

Apr 30, 2010 | 1994 Acura Integra

1 Answer

How do I change a water pump on a 2004 kia sorento?


Kia Sorento 2003-05
Water Pump - Removal & Installation
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Drain the cooling system.
  3. Disconnect the negative battery cable.
  4. Remove the drive belt and the water pump pulley.
  5. Remove the timing belt cover, timing belt, auto tensioner and idler pulley.
  6. Remove the water outlet fitting, the thermostat case and the water pump fitting.
  7. Remove the water pump mounting bolts.
  8. Remove the water pump.

  9. dc45c19.jpg

    Fig. Water pump and timing belt assembly-exploded view

To install:

1016213.jpg

Fig. Water pump bolt locations
  1. Clean the gasket surfaces of the water pump body and the cylinder block.
  2. Install the new water pump gasket and pump assembly. Tighten the bolts to 12-16 ft. lbs. (17-22 Nm).
  3. Install the water pump fitting, the thermostat case and the water outlet fitting.
  4. Install the auto tensioner and timing belt. Adjust the timing belt tension, then install the timing belt cover.
  5. Install the drive belt, water pump pulley and then adjust the auto tensioner.
  6. Refill the coolant.
  7. Run the engine and check for leaks.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain the cooling system.
  3. Disconnect the negative battery cable.
  4. Remove the drive belt and the water pump pulley.
  5. Remove the timing belt cover, timing belt, auto tensioner and idler pulley.
  6. Remove the water outlet fitting, the thermostat case and the water pump fitting.
  7. Remove the water pump mounting bolts.
  8. Remove the water pump.

To install:


e9be8c3.jpg

Fig. Water pump bolt locations

596080e.jpg

Fig. Water pump O-ring installation
  1. Clean the gasket surfaces of the water pump body and the cylinder block.
  2. Install the new water pump gasket and pump assembly. Tighten the bolts to 12-16 ft. lbs. (17-22 Nm).
  3. Install the water pump fitting, the thermostat case and the water outlet fitting.
  4. Install the auto tensioner and timing belt. Adjust the timing belt tension, then install the timing belt cover.
  5. Install the drive belt, water pump pulley and then adjust the auto tensioner.
  6. To adjust the drive belt tension, hang the belt on the pulley of the tensioner and install the tensioner.
    NOTE If the tensioner is already installed, loosen its mounting bolts to allow belt installation
  7. Install the drive belt.
  8. Adjust the belt tension to specification by turning the adjusting bolt clockwise or counterclockwise.
  9. Air conditioning belt tension should be 0.28-0.039 inch. Alternator belt tension should be 0.39-0.051 inch. Power steering belt tension should be 0.31-0.051 inch.
  10. Torque the tensioner assembly bolt to 33-36 ft. lbs. (45-50 Nm).
  11. Refill the coolant.
  12. Run the engine and check for leaks.

TY for using Fixya; remember comment and rated this.

Apr 01, 2010 | 2004 Kia Sorento

1 Answer

Changing the timing belt on a Hundai


  1. Remove all necessary components for access to the timing belt cover, then remove the cover.
  2. Rotate the crankshaft clockwise and align the timing marks so No. 1 piston will be at Top Dead Center (TDC) of the compression stroke.
  3. Loosen the tensioning bolt and the pivot bolt on the timing belt tensioner. Move the tensioner as far as it will go toward the water pump. Tighten the adjusting bolt.
  4. Mark the timing belt with an arrow showing direction of rotation.
  5. Remove the timing belt.
  6. If defective, remove the timing belt tensioner.
  7. Align the timing marks of the camshaft sprocket and check that the crankshaft timing marks are still in alignment.
  8. If removed, install the timing belt tensioner, spring and spacer with the bottom end of the spring free. Tighten the adjusting bolt slightly with the tensioner moved as far as possible away from the water pump.
  9. Install the free end of the spring into the locating tang on the front case.
  10. Position the timing belt over the crankshaft sprocket, then over the camshaft sprocket. Slip the back of the belt over the tensioner wheel.
  11. Turn the camshaft sprocket in the opposite of its normal direction of rotation until the straight side of the belt is tight and be sure the timing marks align.
    NOTE If the timing marks are not properly aligned, shift the belt 1 tooth at a time in the appropriate direction until they are aligned.
  12. Loosen the tensioner mounting bolts so the tensioner works, without the interference of any friction, under spring pressure. Be sure the belt follows the curve of the camshaft pulley so the teeth are engaged all the way around. Correct the path of the belt, if necessary.
  13. Tighten the tensioner adjusting bolt, then the tensioner pivot bolt to 15-18 ft. lbs. (20-26 Nm).
    NOTE Bolts must be tightened in the stated order or tension won't be correct.
  14. Turn the crankshaft 1 turn clockwise until timing marks again align to seat the belt.
  15. Loosen both tensioner attaching bolts and let the tensioner position itself under spring tension. Retighten the bolts.
  16. Check belt tension by putting a finger on the water pump side of the tensioner wheel and pull the belt toward the water pump. The belt should move toward the pump until the teeth are approximately 1 / 2 of the way across the head of the tensioner adjusting bolt. Re-tension the belt, if necessary.
  17. Install the timing belt covers and all other related components.

Feb 09, 2010 | Hyundai Motor 2004 Sonata

2 Answers

What else needs to be changed when doing a timing belt on a 1999 honda accord? and about how much should it cost?


Technically, nothing else needs to be changed when replacing a timing belt, however it is recommended or suggested to replace the timing belt tensioner and water pump while doing the belt. These items are only accessable when doing a timing belt. The cost should be under $100.00

Jan 22, 2010 | 1999 Honda Accord

1 Answer

How do a change a water pump on a 2001 pontiac grand am 4cyl please?


To change the water pump on the 1.8 or 2.0 4cyl is a complex project. The water pump is driven by the timing belt which means you have to remove the timing belt cover. Once youve done that you will need to release the tension on the timing belt make sure you have aligned the timing marks on both the camshaft and crankshaft sprockets before loosing the timing belt and be sure you do not move them while the timing belt is off and be sure they do not move while putting the belt back on. The tensioner will have to be locked down either before or after taking it out if after you will need to compress the tensioner and stick a small drill bit through the holes that way when you install it back all you have to do is pull the bit out and the tensioner does the rest. Once the belt is loose then you can remove the water pump and install the new one.

Dec 01, 2009 | 2001 Pontiac Grand Prix

2 Answers

I have a ACURA 3.5 RL with only 138000 KM and wondering if I should replaced the timing belt and water pump


If you know that the timing belt has not been changed at the regular interval or ever been changed, then YES. Also change the water pump and timing belt tensioners.
Its normal to change every 80,000 - 100,000 km

Oct 20, 2009 | 2000 Acura 3.5RL

2 Answers

Timing belt jumped... why?


This can be caused by not tensioning the belt corectly.When fitting a new belt you should allways replace the tensioner,and make sure the water pump pulley is in good working order.Its always wise to get your timming belt from the dealer.as others are nown to be faulty.Fit new belt follow manuel when doing so.good luck

Aug 01, 2009 | 1998 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...